This document specifies requirements for the specification and qualification of brazing procedures for brazing of metallic materials. This document specifies requirements for brazing of the test piece, testing of the test specimen, essential variables and their range of qualification, acceptance criteria, brazing procedure qualification record (BPQR) and brazing procedure specification (BPS). This document gives general provisions on quality requirements for brazing (see Annex A). This document does not cover testing of residual stresses, corrosion resistance and impact properties. This document applies to the following brazing processes according to ISO 857-2 and ISO 4063:2009 with local and global heating: — 911 Infrared brazing; — 912 Flame brazing, torch brazing; — 913 Laser beam brazing; — 914 Electron beam brazing; — 916 Induction brazing; — 918 Resistance brazing; — 919 Diffusion brazing; — 921 Furnace brazing; — 922 Vacuum brazing; — 923 Dip-bath brazing; — 924 Salt-bath brazing; — 925 Flux bath brazing; — 926 Immersion brazing; — 972 Arc weld brazing. The principles of this document can be applied to other brazing processes and brazing of materials not listed.

  • Draft
    18 pages
    English language
    sale 15% off
  • Draft
    18 pages
    English language
    sale 15% off

This document provides a grouping system for American parent materials for brazing.

  • Technical report
    29 pages
    English language
    sale 15% off

This document identifies the essential welding quality related tasks and responsibilities included in welding coordination. The principle of an assessment according to this document is that welding coordination personnel need to be competent in the welding-related tasks allocated to them. It is presumed that welding coordination personnel have the necessary education, qualifications and experience and are appointed by the manufacturer. Regulatory documents, application standards and contracts can give specific requirements for welding coordination personnel. Otherwise, it is the responsibility of the manufacturer to determine the requirements to be in compliance with this document.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off

ISO 14732:2013 specifies requirements for qualification of welding operators and also weld setters for mechanized and automatic welding. ISO 14732:2013 does not apply to personnel exclusively performing loading or unloading of the automatic welding unit. ISO 14732:2013 is applicable when qualification testing of welding operators and weld setters is required by the contract or by the application standard. The requirements for testing of stud welding operators and setters are given in ISO 14555. The qualification and revalidation is in accordance with ISO 14732:2013. One annex deals with functional knowledge. Another annex deals with welding technical knowledge, a third annex outlines the qualification test certificate.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off

ISO 9606-1:2012 specifies the requirements for qualification testing of welders for fusion welding of steels. It provides a set of technical rules for a systematic qualification test of the welder, and enables such qualifications to be uniformly accepted independently of the type of product, location and examiner or examining body. When qualifying welders, the emphasis is placed on the welder's ability manually to manipulate the electrode, welding torch or welding blowpipe, thereby producing a weld of acceptable quality. The welding processes referred to in ISO 9606-1:2012 include those fusion-welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automated welding processes.

  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    35 pages
    French language
    sale 15% off

ISO 9606-2:2004 specifies the requirements for qualification of welders for fusion welding of aluminium and aluminium alloys. ISO 9606-2:2004 provides a set of technical rules for systematic qualification of welders, which are independent of product type, location and examiner/examining body. The welding processes referred to in ISO 9606-2:2004 include those fusion welding processes which are designated as manual or partly mechanized welding. It does not qualify fully mechanized and automated welding processes.

  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    34 pages
    French language
    sale 15% off
  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    23 pages
    French language
    sale 15% off

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of copper. This standard applies to the approval testing of welders for the fusion welding of copper. This standard is intended to provide the basis for the mutual recognition by examining bodies for approval relating to welders' competence in the various fields of application. Tests will be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard when these are applied. During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A. This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2). This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4. The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.

  • Standard
    23 pages
    English language
    sale 15% off
  • Standard
    28 pages
    French language
    sale 15% off

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of nickel. This standard applies to the approval testing of welders for the fusion welding of nickel. This standard is intended to provide the basis for the mutual recognition by examining bodies for approval relating to welders' competence in the various fields of application. Tests will be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard when these are applied. During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A. This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2). This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4. The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.

  • Standard
    20 pages
    English language
    sale 15% off
  • Standard
    26 pages
    French language
    sale 15% off

ISO 13585:2012 specifies basic requirements for the qualification testing of brazers and brazing operators providing conditions for brazing, testing, examination, acceptance criteria and range of qualification for certificates.

  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    18 pages
    French language
    sale 15% off

ISO 14731:2006 identifies the quality-related responsibilities and tasks included in the coordination of welding-related activities. In any manufacturing organization, welding coordination can be undertaken by one or a number of persons. Welding coordination requirements can be specified by a manufacturer, a contract or an application standard.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    24 pages
    French language
    sale 15% off
  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off

Specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of aluminium. The recommended format for the certificate of approval testing is given in annex A. Applies to the approval testing of welders for the fusion welding of aluminium using a gas shield. Covers approval testing of welders for work on semifinished and finished products made from wrought, forged or cast materials types listed in 5.4. Does not cover the issue of the certificate of approval testing which is under the sole responsibility of the examiner or test body.

  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    25 pages
    French language
    sale 15% off
  • Standard
    25 pages
    French language
    sale 15% off

Specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of steels. The recommended format for the certificate of approval testing is given in annex B. Applies to the approval testing of welders for the fusion welding of steels. Covers approval testing of welders for work on semifinished and finished products made from wrought, forged or cast materials types listed in 5.4. Does not cover the issue of the certificate of approval testing which is under the sole responsibility of the examiner or test body.

  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off