This Standard defines requirements for the characterization of unused modified esters or blends of unused esters used as insulating liquids for electrotechnical applications. It does not cover liquids that contain any proportion of used liquids. The liquids covered by this document are intended mainly for transformer applications. Unused modified/synthetized esters are derived from a natural or synthetic base, or are blends of both. This document covers a variety of ester liquids not covered by ...view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This document establishes the measurement of the interfacial tension between insulating
liquid and water by means of the Du Noüy ring method close to equilibrium conditions. In
order to obtain a value that provides a realistic expression of the real interfacial tension, a
measurement after a surface age of approximately 180 s is recorded.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

IEC 62820-3-1:2017 gives guidelines for planning, installation, commissioning, operation and maintenance of Building Intercom Systems (BIS), for use in security applications. The different technical requirements for BIS are specified in IEC 62820-1-1 and IEC 62820-1-2. The objectives of this document are to:
- provide a framework to assist system integrators, installers, consultant engineers and system owners in establishing their requirements;
- assist specifiers and system owners in determin...
view more

    • sale 15% off
    • Standard
      40 pages
      English and French language

This International Standard covers specifications and test methods for unused silicone liquids
intended for use in transformers and other electrotechnical equipment.
The specified characteristics of silicone transformer liquid classified as L-NTUK-8360300 (in
accordance with IEC 61039) are described in Table 1.
Besides the standard transformer applications there are other applications of silicone liquids,
such like cable accessories, capacitors, electrical magnets etc. The specified charact...
view more

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

EN IEC 62770 describes specifications and test methods for unused natural esters in transformers and similar oil-impregnated electrical equipment in which a liquid is required as an insulating and heat transfer medium. Use of natural esters is not recommended for electrical equipment that is open to the atmosphere. In this standard the term “natural esters” applies to insulating fluids for transformers and similar electrical equipment with suitable biodegradability and environmental compatibilit...view more

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

EN-IEC 60695-1-40 provides guidance on the minimization of fire hazard arising from the use of electrical insulating liquids, with respect to: a) electrotechnical equipment and systems, b) people, building structures and their contents. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies. One o...view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

IEC 62770:2013 describes specifications and test methods for unused natural esters in transformers and similar oil-impregnated electrical equipment in which a liquid is required as an insulating and heat transfer medium. Natural esters with additives are within the scope of this standard. Because of their different chemical composition, natural esters differ from insulating mineral oils and other insulating fluids that have high fire points, such as synthetic esters or silicone fluids. Natural, ...view more

    • sale 15% off
    • Standard
      34 pages
      English and French language

This part of IEC 62697 specifies a test method for the quantitative determination of corrosive sulfur compounds-dibenzyl disulfide (DBDS) in used and unused insulating liquids over a 5 - 600 mg kg-1 concentration range.

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

IEC 62697-1:2012 specifies a test method for the quantitative determination of corrosive sulfur compounds-dibenzyl disulfide (DBDS) in used and unused insulating liquids over a 5 to 600 mg kg-1 concentration range.

    • sale 15% off
    • Standard
      64 pages
      English and French language

This International Standard specifies oil-sampling procedures, analysis requirements and procedures, and recommends sensitivity, repeatability and accuracy criteria for the application of dissolved gas analysis (DGA) to factory testing of new power transformers, reactors and instrument transformers filled with mineral insulating oil when DGA testing has been specified. The most effective and useful application of DGA techniques to factory testing is during the performance of long-term tests, typ...view more

    • sale 10% off
    • Amendment
      7 pages
      English language
    • e-Library read for
      1 day

IEC 60475:2011 is applicable to the procedure to be used for insulating liquids in delivery containers and in electrical equipment such as power and instrument transformers, reactors, bushings, oil-filled cables, oil-filled tank-type capacitors, switchgear and load tap changers. The main changes with respect to the previous edition are as follows: - withdrawal of askarels; - addition of recommendations concerning general health, safety and environmental protection; - additional details regarding...view more

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

This International Standard covers the specification and test methods for unused synthetic organic esters. It applies to synthetic organic esters, delivered to the agreed point and time of delivery intended, for use in transformers, switchgear and similar related equipment in which synthetic organic esters are required as an insulant and for heat transfer. These unused synthetic organic esters are obtained by chemical processing and physical treatments of fatty acids and polyols.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies oil-sampling procedures, analysis requirements and procedures, and recommends sensitivity, repeatability and accuracy criteria for the application of dissolved gas analysis (DGA) to factory testing of new power transformers, reactors and instrument transformers filled with mineral insulating oil when DGA testing has been specified. The most effective and useful application of DGA techniques to factory testing is during the performance of long-term tests, typ...view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This standard describes the sampling procedures and methods for the determination of particle concentration and size distribution. Three methods are specified. One uses an automatic particle size analyser, working on the light interruption principle. The other two use an optical microscope, in either the transmitted light or incident light mode, to count particles collected on the surface of a membrane filter. The optical microscope methods are described in ISO 4407. All three methods are applic...view more

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

Describes methods for the determination of the dielectric dissipation factor, relative permittivity and d.c. resistivity of any insulating liquid material at the test temperature. The methods are primarily intended for making reference tests on unused liquids. They can also be applied to liquids in service in transformers, cables and other electrical apparatus. However the method is applicable to a single phase liquid only. When it is desired to make routine determinations, simplified procedures...view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

Describes a method for simultaneous measurement of conductance G and capacitance C enabling the calculation of the dielectric dissipation factor tan delta of insulating liquides. Method applies to both unused insulating liquids and insulating liquids in service in transformers and in other electrical equipment.

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

Describes a method for simultaneous measurement of conductance G and capacitance C enabling the calculation of the dielectric dissipation factor tan delta of insulating liquides. Method applies to both unused insulating liquids and insulating liquids in service in transformers and in other electrical equipment.

    • sale 15% off
    • Standard
      43 pages
      English and French language

EN following parallel vote * Corrigendum to EN issued December 1993

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day