iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 4179:2000

(Main)

Aerospace series - Qualification and approval of personnel for non-destructive testing

Aerospace series - Qualification and approval of personnel for non-destructive testing

This Standard specifies the minimum requirements for the qualification and approval of personnel involved in the application of non-destructive testing (NDT). These requirements include training, experience and examination within the aerospace industry (manufacture and service).

Luft- und Raumfahrt - Qualifikation und Zulassung des Personals für zerstörungsfreie Prüfung

In der vorliegenden Norm werden die Mindestanforderungen für die Qualifikation und Zulassung von Personal der zerstörungsfreien Prüfung (ZfP) festgelegt. Die Anforderungen beinhalten Ausbildung, Erfahrung und Prüfung für die Luft- und Raumfahrtindustrie (Fertigung und Dienstleistung).

Série aérospatiale - Qualification et agrément du personnel pour les contrôles non destructifs

La présente norme spécifie les exigences minimales de qualification et d'agrément du personnel impliqué dans l'application des contrôles non destructifs (CND). Ces exigences sont relatives à la formation, à l'expérience et aux examens dans l'industrie aérospatiale (fabrication et prestations).

Aerospace series - Qualification and approval of personnel for non-destructive testing

General Information

Status
Withdrawn
Publication Date
21-Mar-2000
Withdrawal Date
06-Dec-2005
ICS
49.020 - Aircraft and space vehicles in general
Technical Committee
ASD/MAT - Materials
Drafting Committee
ASD/MAT - Materials
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
07-Dec-2005
Completion Date
07-Dec-2005
Ref Project
SIST EN 4179:2001 - Aerospace series - Qualification and approval of personnel for non-destructive testing

Relations

Replaced By
EN 4179:2005 - Aerospace series - Qualification and approval of personnel for non-destructive testing
Effective Date
22-Dec-2008

Buy Standard

EN 4179:2001EN 4179:2001
PreviousNext
Standard
EN 4179:2001
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Qualification and approval of personnel for non-destructive testingLuft- und Raumfahrt - Qualifikation und Zulassung des Personals für zerstörungsfreie PrüfungSérie aérospatiale - Qualification et agrément du personnel pour les contrôles non destructifsAerospace series - Qualification and approval of personnel for non-destructive testing49.020Letala in vesoljska vozila na splošnoAircraft and space vehicles in general19.100Neporušitveno preskušanjeNon-destructive testing03.100
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 9215:2023(Main)
Programme Management - Definition justification and qualification - A guide to drawing up the definition justification plan and of the definition justification dossier
SIST EN 9215:2023

This document sets forth the general rules applying to the justification of the definition of a product (tangible or intangible) and specifies the content of the Definition Justification Plan (DJP) and the Definition Justification Dossier (DJD).
It is applicable to all products designed and developed to fulfil the requirements of a customer expressed in a (Need) Technical Specification. Industrials are advised to apply the following principles to their own needs for justification in their internal customer/supplier relations.
Clause 5 presents the concepts and the documents associated with the justification of the definition and qualification processes.
Clause 6 summarizes the role and the contractual nature of the qualification of the definition.
Clause 7 gives details of the qualification of the definition process, while Clause 8 positions this process in the programme development logic.
The document also describes the differences between the justification and the qualification of the definition and other notions, such as verification, validation or acceptance (Clause 9).
Clause 10 is a guide to the establishment and maintenance of the documents associated with the justification of the definition and qualification processes. Information related to the certification process, even if it is out of the scope of the present document, is also presented in Clause 10, because this process has certain similarities with the justification of the definition and qualification process.
This document belongs to the documents supporting the EN 9200 relating to Project Management Specification.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20785-3:2023(Main)
Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 3: Measurements at aviation altitudes (ISO 20785-3:2023)
SIST EN ISO 20785-3:2023

This document gives the basis for the measurement of ambient dose equivalent at flight altitudes for the evaluation of the exposures to cosmic radiation in civilian aircraft.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9114:2022(Main)
Aerospace series - Quality systems - Direct Ship - Guidance for aerospace companies
SIST EN 9114:2023

1.1   General
This document is limited to the aerospace industry, where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process, the approved manufacturer is responsible for assurance that the article conforms to type design information.
1.2   Purpose
This document provides guidance to approved manufacturers, their suppliers, and customers when an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s purchase document directly to a customer, commonly known as “Direct Ship”.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9147:2022(Main)
Aerospace series - Management of unsalvageable items
SIST EN 9147:2023

This document is applicable to all items used for manufacturing, maintenance, and repair of aviation, space, and defence products from the raw material to the final product (e.g. aircraft, structural items, constituent assemblies, standard parts, consumables with conformity and/or safety impact).
This document considers items dispositioned as scrap in accordance with EN 9100-series standards’ supporting nonconformity management, corrective action, or organisation decisions (e.g. obsolescence, inventory management, missing traceability documentation).
The requirements specified in this document are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this document and applicable statutory or regulatory requirements, the applicable statutory or regulatory requirements take precedence.
This document defines requirements and actions to be taken after the disposition decision to control the unsalvageable items within the organisation and its external providers.
NOTE   The control of external provider is addressed in the EN 9100-series standards.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4179:2021(Main)
Aerospace series - Qualification and approval of personnel for non-destructive testing
SIST EN 4179:2022

1.1 Purpose
This document establishes the minimum requirements for the qualification and certification of personnel performing non-destructive testing (NDT), non-destructive inspection (NDI), or non-destructive evaluation (NDE) in the aerospace manufacturing, service, maintenance and overhaul industries. For the purposes of this document, the term NDT will be used and will be considered equivalent to NDI and NDE.
In Europe, the term "approval" is used to denote a written statement by an employer that an individual meets specific requirements and has operating approval. The term "certification" as defined in 3.2 is used throughout this document as a substitute for the term "approval". Except when otherwise specified in the written practice, certification in accordance with this document includes operating approval.
1.2 Applicability
1.2.1 General
This document applies to personnel using NDT methods to test and/or accept materials, products, components, assemblies or sub-assemblies. This document also applies to personnel: directly responsible for the technical adequacy of the NDT methods used, who approve NDT procedures and/or work instructions, who audit NDT facilities, or who provide technical NDT support or training.
This document does not apply to individuals who only have administrative or supervisory authority over NDT personnel or to research personnel developing NDT technology for subsequent implementation and approval by a certified Level 3.
Personnel performing specialized inspections using certain direct readout instruments as determined by a Level 3 person certified in the test method, do not require qualification or certification to this document.
1.2.2 Implementation
This document addresses the use of a National Aerospace NDT Board (NANDTB). NANDTBs are only used as specified according to Annex C and it is not mandatory to have such a board for compliance with this document. Personnel certified to previous revisions of NAS 410 or EN 4179 need not recertify to the requirements of this document until their current certification expires.
1.3 Test Methods
1.3.1 Common test methods
This document contains detailed requirements for the following common NDT methods:
Eddy Current Testing   (ET)
Magnetic Particle Testing   (MT)
Penetrant Testing   (PT)
Radiographic Testing   (RT)
Thermographic Testing   (TT)
Ultrasonic Testing   (UT)
1.3.2 Other test methods
When invoked by engineering, quality, cognizant engineering organization or prime contractor requirements, this document applies to other current and emerging NDT methods used to determine the acceptability or suitability for intended service of a material, part, component, assembly or sub-assembly. Such test methods can include, but are not limited to, acoustic emission testing (AT), neutron radiography, leak testing, holography, and shearography. The requirements for personnel training, experience, and examination for these other test methods are established in accordance with 6.4 and are documented by the employer.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    39 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9208:2021(Main)
Aerospace series - Programme management - Expression of need - Guidance on and format for (Need) Technical Specification
SIST EN 9208:2021

This document belongs to the documents going along with EN 9200 relating to Project Management Specification.
The aims of this document are as follows:
-   to specify/remind the concept of (Need) Technical Specification (N)TS;
-   to define the principles and conditions for drawing up, approving, using and updating a (N)TS;
-   to propose a template of (N)TS.
The template identifies topics and types of related requirements to be covered in a (N)TS without being completely exhaustive or mandatory. It is due to be analysed like a check-list and tailored according to the type of the product of interest, the context of the bodies involved and the contractual details.
The principle of drawing up a (N)TS applies to both tangible and intangible products (e.g. services).
The customer/supplier relationship addressed by these principles may also apply within a single organization. The concepts of customer and supplier are discussed in this document without distinction between internal or external relationship.
This document implements and adapts EN 16271 to the context, in order to meet the specific needs of the aeronautical field and more generally the needs of other fields.
This document is more explicit about certain aspects of ISO/IEC/IEEE 29148 dedicated to requirements engineering, such as the responsibility for drawing up a (N)TS on a contractual basis and also the process of drawing it up within a programme (stages and milestones). It also supplements the technical specification framework proposed by ISO/IEC/IEEE 29148, in particular with requirements relating to safety of operation and result assurance.
The relationships existing between Functional Performance Specification (FPS) and (N)TS for expression of needs are given in Annex A.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9721:2021(Main)
Aerospace series - General recommendation for the BIT Architecture in an integrated system
SIST EN 9721:2022

The purpose of this document is to harmonise the dialogue between manufacturers, prime contractors, owners and the customer in view of making it easier to draw up specifications, share BIT architecture models and the BIT technical configuration of systems during the operational use phase.
This recommendation proposes adopting BIT operational efficiency and performance definitions, architecture design principles, and BIT specification or validation principles. It provides no recommendations regarding the numeric values for operational efficiency or performance. The diversity of situations, development of technological solutions and ever-changing operational requirements make it impossible to list general recommendations.
Clause 6 and Clause 9 set out the general context of use of the BIT.
Clause 7 lists the constraints to be taken into account to design a BIT architecture.
Clause 8 lists the various BIT types currently known and the definitions of performance and operational efficiency (metrics).
Clause 10 provides recommendations on the BIT architecture.
Clause 11 recommends a language for exchanging BIT architecture models for assembling the complete model of a system.
Clause 12 is an introduction to the prognosis.
This European standard is mainly intended for system designers.
Although it is based on examples of aeronautic systems, it is applicable to any type of system.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20785-4:2021(Main)
Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 4: Validation of codes (ISO 20785-4:2019)
SIST EN ISO 20785-4:2021

This document is intended for the validation of codes used for the calculation of doses received by individuals on board aircraft. It gives guidance to radiation protection authorities and code developers on the basic functional requirements which the code fulfils.
Depending on any formal approval by a radiation protection authority, additional requirements concerning the software testing can apply.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9131:2020(Main)
Aerospace series - Quality Management Systems - Nonconformance Data Definition and Documentation
SIST EN 9131:2020

1.1 Application
This standard defines the common nonconformity data definition and documentation that shall be exchanged between an internal/external supplier or sub-tier supplier, and the customer when informing about a nonconformity requiring formal decision. The requirements are applicable, partly or totally, when reporting a product nonconformity to the owner or operator, as user of the end item (e.g., engine, aircraft, spacecraft, helicopter), if specified by contract.
Reporting of nonconformity data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.
1.2 Purpose
The process of exchanging, coordinating, and approving nonconformity data via concession or product quality escape varies with the multiple relationships and agreements among all parties concerned. The information provided by this standard forms architecture for submitting and managing data that allows for concise and accurate communication using various documented methods. The main objective of this standard is to provide the definition of a data set that can be integrated into any form of communication (e.g., electronic data interchange, submission of conventional paper forms).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9130:2020(Main)
Aerospace series - Quality systems - Record retention
SIST EN 9130:2020

1.1 General
This document provides requirements and guidance for the retention, storage, retrieval and disposal of records for the international aviation, space and defense industry.
1.2 Applicability
1.2.1 This document is applicable to all documents and data records, on current and earlier products, produced using current and previous business agreements and applicable statutory and regulatory requirements.
1.2.2 Documents should be interpreted in the broadest possible sense to include all records, data and information, in paper or in electronic form or on film, including external providers working on own behalf.
1.2.3 Some documents may be retained electronically. The form in which documents are to be retained varies from one jurisdiction to another and varies depending on the document involved. Some countries prescribe that certain documents be retained in their original form as a hardcopy (e.g. board minutes, documents under seal, trust documents and original documents that are subject to specific legal requirements…).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day