iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 16807:2016

(Main)

Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants

Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants

This European Standard specifies the term bio-lubricant and minimum requirements for all kinds of bio-lubricants and bio-based lubricants, while e.g. the EEL [4] refers to specific bio-lubricant families.
This European Standard also briefly describes relevant test method needs with respect to the characterization of bio-lubricants. It presents recommendation for related standards in the field of biodegradability, product functionality and the amount of different renewable raw materials and/or different bio-based contents used during manufacturing of such bio-lubricants forming one product group.
WARNING — Not all potential risks for the environment can be addressed by this standard.

Flüssige Mineralöl-Erzeugnisse - Bio-Schmierstoffe - Kriterien und Anforderungen für Bio-Schmierstoffe und biobasierte Schmierstoffe

Diese Europäische Norm legt den Begriff Bio-Schmierstoff und Mindestanforderungen an alle Arten von Bio Schmierstoffen und biobasierten Schmierstoffen fest, während sich z. B. die EEL [4] auf bestimmte Familien von Bio-Schmierstoffen bezieht.
Diese Europäische Norm beschreibt darüber hinaus kurz die benötigten wesentlichen Prüfverfahren in Zusammenhang mit der Charakterisierung von Bio-Schmierstoffen. Sie enthält Empfehlungen für zugehörige Normen im Bereich der biologischen Abbaubarkeit, der Funktionalität des Produktes und der Menge unterschiedlicher nachwachsender Rohstoffe bzw. unterschiedlicher biobasierter Gehälter, die bei der Herstellung derartiger Bio-Schmierstoffe verwendet werden, die eine Produktgruppe bilden.
WARNUNG - In dieser Norm können nicht sämtliche potentiellen Risiken für die Umwelt behandelt werden.

Produits pétroliers liquides - Bio-lubrifiants - Critères et exigences sur les bio-lubrifiants et lubrifiants d'origines biologiques

La présente Norme européenne définit le terme bio-lubrifiant ainsi que les exigences minimales applicables à tous les types de bio-lubrifiants et lubrifiants d'origine biologique, tandis que d'autres documents, tels que l'EEL[4] par exemple, se rapportent à des familles bien précises de bio-lubrifiants.
La présente Norme européenne décrit également brièvement les besoins relatifs à la méthode d'essai pertinente pour ce qui concerne la caractérisation des bio-lubrifiants. Elle propose des recommandations pour les normes connexes dans le domaine de la biodégradabilité, la fonctionnalité du produit ainsi que la quantité de matières premières renouvelables différentes et/ou de différents composants d'origine biologique utilisés pendant la fabrication des bio-lubrifiants formant un groupe de produits.
AVERTISSEMENT: Tous les risques potentiels pour l'environnement ne peuvent être traités dans cette norme.

Tekoči naftni proizvodi - Biomaziva - Kriteriji in zahteve za biomaziva in maziva na biološki osnovi

Ta evropski standard določa izraz biomazivo ter minimalne zahteve za vse vrste biomaziv in maziv na biološki osnovi, medtem ko se npr. znak EEL [1] nanaša na določene družine biomaziv.  Poleg tega ta evropski standard na kratko opisuje ustrezne potrebe preskusnih metod v zvezi s karakterizacijo biomaziv. Podaja priporočilo za z njim povezane standarde na področju biorazgradljivosti, funkcionalnost proizvoda ter količino različnih obnovljivih surovin in/ali različnih snovi na biološki osnovi, ki se uporabljajo pri proizvodnji takih biomaziv, ki sestavljajo eno skupino proizvodov.

General Information

Status
Published
Publication Date
11-Oct-2016
Withdrawal Date
29-Apr-2017
ICS
75.100 - Lubricants, industrial oils and related products
Technical Committee
CEN/TC 19 - Petroleum products, lubricants and related products
Drafting Committee
CEN/TC 19/WG 33 - Bio-lubricants
Current Stage
Mandate
M/430 - Mandate addressed to CEN for the development of European Standards and CEN workshop agreements for BIO-Polymers and BIO-Lubricants in relation to BIO-Based products aspects
Ref Project
SIST EN 16807:2016 - Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants

Buy Standard

EN 16807:2016EN 16807:2016
PreviousNext
Standard
EN 16807:2016
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flüssige Mineralöl-Erzeugnisse - Bio-Schmierstoffe - Kriterien und Anforderungen an Bio-Schmierstoffe und bio-basierte SchmierstoffeProduits pétroliers liquides - Bio-lubrifiants - Critere et exigences de bio-lubrifiants et lubrifiant en basse biologiqueLiquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants75.100MazivaLubricants, industrial oils and related products27.190Biološki viri in drugi alternativni viri energijeBiological sources and alternative sources of energyICS:Ta slovenski standard je istoveten z:EN 16807:2016SIST EN 16807:2016en,de01-december-2016SIST EN 16807:2016SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16807
October
t r s x ICS
y wä s r r English Version
Liquid petroleum products æ Bioælubricants æ Criteria and requirements of bioælubricants and bioæbased lubricants Produits pétroliers liquides æ Bioælubrifiants æ Critères et exigences sur les bioælubrifiants et lubrifiants d 5origines biologiques
Flüssige MineralölæErzeugnisse æ BioæSchmierstoffe æ Kriterien und Anforderungen für BioæSchmierstoffe und bioæbasierte Schmierstoffe This European Standard was approved by CEN on
t x May
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x z r yã t r s x ESIST EN 16807:2016

Test methods for determining 14C content . 13 Annex B (normative)
Bio-lubricants - groups of application . 14 Bibliography . 18
April 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. Mandate M/430 covers the development of European standards for bio-lubricants in relation to bio-based product aspects. It has been prepared by CEN/TC 19/WG 33 “Bio-Lubricants”, the secretariat of which is held by DIN. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16807:2016

Tri-methylol-propane-trioleate (TMP-O) Biodegradablea and
bio-basedb Non-renewable Biodegradablea Di-isotridecyl-adipate (DITA) Biodegradablea Renewable Inherently or
non biodegradable Hydrocarbons from process
“Biomass-to-Liquid” (BtL) Bio-basedb Non-renewable Non biodegradable White oil for foodgrade lubricants Biocompatible a According to OECD 301[5]. b According to EN 16575. NOTE In addition, consideration of soil dwelling organisms could be reflected in a future edition. Even if in a more general approach “environmentally compatible lubricants” can be seen under additional aspects, up to a comprehensive Life Cycle Assessment (LCA), this European Standard focuses on the term bio-lubricant, which comprises requirements regarding biodegradability, aquatic toxicity, content of biomass and performance. SIST EN 16807:2016
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 2719:2016/A1:2021(Amendment)
Determination of flash point - Pensky-Martens closed cup method - Amendment 1: Thermometers correction (ISO 2719:2016/Amd 1:2021)
SIST EN ISO 2719:2016/A1:2021
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17181:2019(Main)
Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO2-production
SIST EN 17181:2019

This document specifies a procedure for determining the degree of aerobic degradation of fully formulated lubricants. The organic material in a fully formulated lubricant is exposed in a synthetic aqueous medium under laboratory conditions to an inoculum from activated sludge.
Biodegradation resulting in mineralisation of the organic material can be determined by measuring released CO2 in a total organic carbon (TOC-) analyser. In contrast to existing test methods measuring released CO2 this method uses a precise preparation procedure for non-water soluble organic material.
The above mentioned method applies to fully formulated lubricants which
a)   are water-soluble, non-water soluble or emulsifiable, and
b)   are not toxic and not inhibitory to the test microorganisms at the test concentration.
The presence of inhibitory effects is determined as specified in this document.
This test method is focused on fresh water as test medium. Tests in sea water are currently not included in this method, but may be introduced later.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20623:2018(Main)
Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of lubricants - Four-ball method (European conditions) (ISO 20623:2017)
SIST EN ISO 20623:2018

This document specifies procedures for the measurement of the extreme pressure (EP) and antiwear
properties of liquid lubricants (categories C, D, F, G, H, M, P of ISO 6743-99), lubricating greases
(ISO 6743-9, category X) and other consistent lubricants. The test conditions are not intended to
simulate particular service conditions, but to provide information over a range of standard conditions
for the purpose of research, development, quality control and fluid ranking. The output is used in
lubricant specifications.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2719:2016(Main)
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)
SIST EN ISO 2719:2016

ISO 2719:2016 describes three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions, biodiesel and other liquids in the temperature range of 40 °C to 370 °C.
CAUTION - For certain mixtures no flash point, as defined, is observed; instead a significant enlargement of the test flame (not halo effect) and a change in colour of the test flame from blue to yellowish-orange can occur. Continued heating can result in significant burning of vapours outside the test cup, and can be a potential fire hazard.
NOTE 1       Although, technically, kerosene with a flash point above 40 °C can be tested using this International Standard, it is standard practice to test kerosene according to ISO 13736.[5] Similarly, lubricating oils are normally tested according to ISO 2592[2].
Procedure A is applicable to distillate fuels (diesel, biodiesel blends, heating oil and turbine fuels), new and in-use lubricating oils, paints and varnishes, and other homogeneous liquids not included in the scope of Procedures B or C.
Procedure B is applicable to residual fuel oils, cutback residua, used lubricating oils, mixtures of liquids with solids, liquids that tend to form a surface film under test conditions or are of such kinematic viscosity that they are not uniformly heated under the stirring and heating conditions of Procedure A.
Procedure C is applicable to fatty acid methyl esters (FAME) as specified in specifications such as EN 14214[11] or ASTM D6751[13].
ISO 2719:2016 is not applicable to water-borne paints and varnishes.
NOTE 2       Water-borne paints and varnishes can be tested using ISO 3679[3]. Liquids containing traces of highly volatile materials can be tested using ISO 1523[1] or ISO 3679.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6743-4:2015(Main)
Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:2015)
SIST EN ISO 6743-4:2015

ISO 6743-4:2015 establishes the detailed classification of fluids of Family H (Hydraulic systems) which belong to class L (Lubricants, industrial oils, and related products). It is intended to be read in conjunction with ISO 6743‑99. This classification system does not include automotive brake fluids or aircraft hydraulic fluids.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16143:2013(Main)
Petroleum products - Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils - Procedure using double LC cleaning and GC/MS analysis
SIST EN 16143:2013

This European Standard specifies a procedure for the determination of the content of benzo[a]pyrene (BaP) in extender oils which are commonly used in the rubber industry for the production of tyres or parts of tyres. The method also yields the sum of the eight individual polycyclic aromatic hydrocarbons (PAHs) listed in Table 1.
The procedure has been tested and verified for the PAHs listed in Table 1 (those required by the European Commission [1]) and additional PAHs as listed in Table A.2.
Analysis of other PAHs is possible in principle, but sufficient quality assurance performed by the user is necessary to secure the analysis.
The application range for this method is from approximately 4 mg/kg to approximately 15 mg/kg for the eight individual PAHs and from approximately 0,5 mg/kg to approximately 2 mg/kg for BaP.
NOTE 1   The intended working range for this method is in the 0,1 mg/kg to 15 mg/kg range. For the lower levels precision has not yet been established.
NOTE 2   For the purposes of this European Standard, the term "% (m/m)" is used to represent the mass fraction (...).
(...)

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16227:2011(Main)
Liquid petroleum products - Bio-lubricants - Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants
SIST-TP CEN/TR 16227:2011

This Technical Report gives information about bio-lubricants and recommendations for bio-lubricant (and bio-based lubricant) related terminology. These recommendations are based on a discussion of commonly used terms in this field.
This Technical Report also briefly describes the current test methods in relation to the characterization of bio-lubricants. It presents recommendation for related standards in the field of biodegradability, product functionality, impact on greenhouse gas emissions and te amount of different renewable raw materials an/or different biobased contents used during manufacturing of such bio-lubricants forming one product group.
The criteria of the European Ecolabel for Lubricants ("EEL") [2] includes the terms discussed in this paper.
NOTE 1   The European Lead Market Initiative ("LMI") [3] defines the term "bio-based" as described in Table 1. It is important to mention that "bio-based" does not imply "biodegradable". In addition, "biodegradable" does not imply the use of "bio-based" material.
NOTE 2   For the purposes of this European Technical Report, the term "% (m/m)" is used to represent the mass fraction.

  • Technical report
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15944:2010(Main)
Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES)
SIST EN 15944:2011

This European Standard specifies an inductively coupled plasma optical emission spectrometry (ICP OES) method for the determination of nickel content in the range 4 mg/kg to 55 mg/kg and of vanadium content in the range 4 mg/kg to 150 mg/kg in fuel oils and residual fuel oils.
NOTE 1   Nickel content can be determined from 2 mg/kg to 4 mg/kg and vanadium content can be determined from 1 mg/kg to 4 mg/kg. However, the precision was not established as no samples with nickel and vanadium contents in these ranges were included in the interlaboratory test. Nickel and vanadium contents higher than those reported can be determined after sample dilution. However, the precision was not established for diluted samples.
NOTE 2   For the purposes of this European Standard, the term "% (V/V)" is used to represent the volume fraction (phi).
WARNING - The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12766-3:2004/AC:2007(Corrigendum)
Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD)
SIST EN 12766-3:2005/AC:2007

TC - Modification to 5.1, 11.2 and Clause 12

  • Corrigendum
    2 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4263-4:2006(Main)
Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils (ISO 4263-4:2006)
SIST EN ISO 4263-4:2006

ISO 4263:2006 specifies a method for the determination of the ageing behaviour of gear oils of categories CKC, CKD, CKS and CKT as defined in ISO 6743-6. The ageing is accelerated by the presence of air and elevated temperatures, and the degradation of the oil is assessed by the change in kinematic viscosity at 100 °C, the insoluble content (precipitation number), and possibly the acid number increase, the sediment content by filtration, the additives content variation and the infra-red oxidation.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day