Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography

This part of EN 14662 is in accordance with the generic methodology selected as the basis of the European Union Reference Method for the determination of benzene in ambient air [1] for the purpose of comparison of measurement results with limit values with a one-year reference period.
The standard describes guidelines for measurements with, and type approval of, automated gas chromatographs. The use of automated instruments gives this part a different structure compared to the other parts including the procedure for selecting an appropriate automated gas chromatograph by means of type approval tests.
Requirements for use in the field are also described.
The standard is applicable to measurements of airborne benzene vapour in the concentration range from 0 µg/m3 to 50 µg/m3 (Standardised to 101,3 kPa and 293 K). This concentration range represents the certification range for benzene in the type approval test.

Luftbeschaffenheit - Standardverfahren zur Bestimmung von Benzolkonzentrationen - Teil 3: Automatische Probenahme mit einer Pumpe mit gaschromatographischer In-situ-Bestimmung

Dieser Teil von prEN 14662 ist in Übereinstimmung mit der allgemeinen Methode, die als Grundlage des Referenzverfahrens der Europäischen Union zur Bestimmung von Benzol in Außenluft [1] gewählt wurde, um Messergebnisse mit Grenzwerten auf Basis von Jahresmittelwerten zu vergleichen.
Diese Norm gibt Anleitungen für die Messung mit und die Eignungsprüfung von automatischen Gaschromatographen. Die Verwendung automatischer Geräte gibt diesem Teil, verglichen mit den anderen, einen anderen Aufbau einschließlich Verfahrenskenngrößen, die erforderlich sind, durch Eignungsprüfungen einen geeigneten Gaschromatographen auszuwählen.
Außerdem werden die Anforderungen für die Verwendung im Feld festgelegt.
Die Norm ist anwendbar für Messungen von gasförmigem Benzol in Luft im Konzentrationsbereich von 0,5 µg/m³ bis 50 µg/m³ (normalisiert auf 101,3 kPa und 293 K). Dieser Konzentrationsbereich entspricht dem Konzentrationsbereich für Benzol in den Eignungsprüfungen.

Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 3 : Prélèvement par pompage automatique avec analyse chromatographique en phase gazeuse sur site

La présente partie de l’EN 14662 est conforme à la méthodologie générique sélectionnée comme base pour la Méthode de référence de l’Union européenne de détermination du benzène dans l’air ambiant [1], en vue de la comparaison des résultats de mesurage avec des valeurs limites pour une période de référence d’un an.
La présente norme fournit des lignes directrices pour les mesurages avec des chromatographes en phase gazeuse automatiques et pour leur approbation de type. L’utilisation d’instruments automatisés confère à la présente partie une structure différente des autres parties, qui comprend le mode opératoire de sélection d’un chromatographe en phase gazeuse automatisé à l’aide d’essais d’approbation de type.
Les exigences relatives à leur utilisation sur site sont également spécifiées.
La présente norme est applicable aux mesurages de vapeur de benzène en suspension dans l’air dans la gamme de concentrations comprise entre 0,5 mg/m3 et 50 mg/m3 (étalonnée à 101,3 kPa et 293 K). Cette gamme de concentrations représente l’étendue de mesure certifiée pour le benzène lors de l’essai d’approbation de type.

Kakovost zunanjega zraka - Standardna metoda za določevanje koncentracije benzena - 3. del: Avtomatsko vzorčenje s črpanjem in določevanje z in-situ plinsko kromatografijo

General Information

Status
Withdrawn
Publication Date
17-May-2005
Withdrawal Date
17-Nov-2015
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
18-Nov-2015

Relations

Buy Standard

Standard
EN 14662-3:2005
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14662-3:2005
01-september-2005
.DNRYRVW]XQDQMHJD]UDND6WDQGDUGQDPHWRGD]DGRORþHYDQMHNRQFHQWUDFLMH
EHQ]HQDGHO$YWRPDWVNRY]RUþHQMHVþUSDQMHPLQGRORþHYDQMH]LQVLWXSOLQVNR
NURPDWRJUDILMR
Ambient Air Quality - Standard method for the measurement of benzene concentrations -
Part 3: Automated pumped sampling with in situ gas chromatography
Luftbeschaffenheit - Standardverfahren zur Bestimmung von Benzolkonzentrationen -
Teil 3: Automatische Probenahme mit einer Pumpe mit gaschromatographischer In-situ-
Bestimmung
Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en
benzene - Partie 3 : Prélevement par pompage automatique avec analyse
chromatographique en phase gazeuse sur site
Ta slovenski standard je istoveten z: EN 14662-3:2005
ICS:
13.040.20 Kakovost okoljskega zraka Ambient atmospheres
SIST EN 14662-3:2005 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14662-3:2005

---------------------- Page: 2 ----------------------

SIST EN 14662-3:2005
EUROPEAN STANDARD
EN 14662-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2005
ICS 13.040.20
English version
Ambient Air Quality - Standard method for the measurement of
benzene concentrations - Part 3: Automated pumped sampling
with in situ gas chromatography
Qualité de l'air ambiant - Méthode pour le mesurage des Luftbeschaffenheit - Standardverfahren zur Bestimmung
concentrations en benzène - Partie 3 - Echantillonnage par von Benzolkonzentrationen - Teil 3: Automatische
pompage automatique suivi d'une chromatographie en Probenahme mit einer Pumpe mit gaschromatographischer
phase gazeuse in situ In-situ-Bestimmung
This European Standard was approved by CEN on 21 March 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14662-3:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14662-3:2005
EN 14662-3:2005 (E)
Contents
Foreword .3
1 Scope.4
2 Normative references .4
3 Terms and definitions.4
4 Symbols and abbreviated terms.8
5 Principles.9
6 Reagents and materials.10
7 Apparatus .11
8 Type approval.12
9 Field Operation and Ongoing Quality Control .25
10 Reports and documentation .33
Annex A (normative) Test of lack of fit.35
Annex B (informative) Calculation of uncertainty in field operation at the li
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.