EN ISO 17296-2:2016
(Main)Additive manufacturing - General principles - Part 2: Overview of process categories and feedstock (ISO 17296-2:2015)
Additive manufacturing - General principles - Part 2: Overview of process categories and feedstock (ISO 17296-2:2015)
ISO 17296-2:2015 describes the process fundamentals of Additive Manufacturing (AM). It also gives an overview of existing process categories, which are not and cannot be exhaustive due to the development of new technologies. ISO 17296-2:2015 explains how different process categories make use of different types of materials to shape a product's geometry. It also describes which type of material is used in different process categories. Specification of feedstock material and requirements for the parts produced by combinations of different processes and feedstock material will be given in subsequent separate standards and are therefore not covered by ISO 17296-2:2015. ISO 17296-2:2015 describes the overreaching principles of these subsequent standards.
Additive Fertigung - Grundlagen - Teil 2: Überblick über Prozesskategorien und Ausgangswerkstoffe (ISO 17296-2:2015)
Dieser Teil der ISO 17296 beschreibt die Prozessgrundsätze der additiven Fertigungsverfahren (en: Additive Manufacturing, AM). Er enthält auch eine Übersicht der bestehenden Prozess¬kategorien, welche aufgrund der Entwicklung neuer Technologien nicht allumfassender Natur ist und dies auch nicht sein kann. Dieser Teil der ISO 17296 erklärt, wie verschiedene Prozesskategorien ver¬schiedene Arten von Werkstoffen verwenden, um eine Produktgeometrie zu formen. Er erklärt auch, welche Arten von Werk-stoffen in den verschiedenen Prozesskategorien verwendet werden. Spezifi¬kationen für Aus¬gangs-werkstoffe und Anforderungen an Bauteile, die aus Kombinationen mehrerer ver¬schiedener Prozesse und Ausgangswerkstoffe gefertigt werden, werden in weiteren separaten Normen ge¬liefert und werden daher nicht durch diesen Teil der ISO 17296 abgedeckt. Dieser Teil der ISO 17296 beschreibt die gesamt-heitlichen Grundsätze dieser weiteren Normen.
Fabrication additive - Principes généraux - Partie 2: Vue d'ensemble des catégories de procédés et des matières premières (ISO 17296-2:2015)
L'ISO 17296-2:2015 décrit les éléments fondamentaux régissant la fabrication additive. Elle donne également une vue d'ensemble des catégories de procédés existantes, lesquelles ne sont pas et ne peuvent pas être exhaustives compte tenu du développement de nouvelles technologies. L'ISO 17296-2:2015 explique comment différentes catégories de procédés peuvent être utilisées avec différentes matières premières pour réaliser la forme d'un produit. Les spécifications des matières premières et les prescriptions pour les pièces produites par combinaisons de différents procédés et matières premières seront indiquées dans des normes séparées à venir et ne sont donc pas couvertes par l'ISO 17296-2:2015. L'ISO 17296-2:2015 décrit les principes lointains de ces futures normes.
Aditivna proizvodnja - Splošna načela - 2. del: Pregled kategorij postopkov in surovin (ISO 17296-2:2015)
ISO 17296-2:2015 opisuje temeljna načela procesov aditivne proizvodnje (AM). Podaja tudi pregled obstoječih procesnih kategorij, ki ni izčrpen in se ne obravnavati kot takšen zaradi razvoja novih tehnologij. ISO 17296-2:2015 pojasnjuje, kako se pri različnih procesnih kategorijah uporabljajo različne vrste materialov za oblikovanje geometrije proizvoda. Poleg tega opisuje, katere vrste materialov se uporabljajo pri različnih procesnih kategorijah. Specifikacija materialov vhodnih surovin in zahteve za dele, proizvedene na podlagi kombinacije različnih procesov in materialov vhodnih surovin bodo podane v naslednjih ločenih standardih in zato niso zajete v standardu ISO 17296-2:2015. ISO 17296-2:2015 opisuje presežna načela teh naslednjih standardov.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17296-2:2016
01-november-2016
$GLWLYQDSURL]YRGQMD2VQRYQDQDþHODGHO 3UHJOHGSURFHVQLKNDWHJRULMLQ
YKRGQLKVXURYLQ ,62
Additive manufacturing - General principles - Part 2: Overview of process categories and
feedstock (ISO 17296-2:2015)
Additive Fertigung - Grundlagen - Teil 2: Überblick über Prozesskategorien und
Rohmaterialien (ISO 17296-2:2015)
Fabrication additive - Principes généraux - Partie 2: Vue d'ensemble des catégories de
procédés et des matières premières (ISO 17296-2:2015)
Ta slovenski standard je istoveten z: EN ISO 17296-2:2016
ICS:
25.030 3D-tiskanje Additive manufacturing
SIST EN ISO 17296-2:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17296-2:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 17296-2:2016
EN ISO 17296-2
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2016
EUROPÄISCHE NORM
ICS 25.040.20
English Version
Additive manufacturing - General principles - Part 2:
Overview of process categories and feedstock (ISO 17296-
2:2015)
Fabrication additive - Principes généraux - Partie 2: Additive Fertigung - Grundlagen - Teil 2: Überblick
Vue d'ensemble des catégories de procédés et des über Prozesskategorien und Rohmaterialien (ISO
matières premières (ISO 17296-2:2015) 17296-2:2015)
This European Standard was approved by CEN on 29 August 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17296-2:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17296-2:2016
EN ISO 17296-2:2016 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17296-2:2016
EN ISO 17296-2:2016 (E)
European foreword
The text of ISO 17296-2:2015 has been prepared by Technical Committee ISO/TC 261 “Additive
manufacturing” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 17296-2:2016 by Technical Committee CEN/TC 438 “Additive Manufacturing” the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2017, and conflicting national standards shall
be withdrawn at the latest by March 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17296-2:2015 has been approved by CEN as EN ISO 17296-2:2016 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 17296-2:2016
---------------------- Page: 6 ----------------------
SIST EN ISO 17296-2:2016
INTERNATIONAL
...
SLOVENSKI STANDARD
SIST EN ISO 17296-2:2016
01-november-2016
Aditivna proizvodnja - Splošna načela - 2. del: Pregled kategorij postopkov in
surovin (ISO 17296-2:2015)
Additive manufacturing - General principles - Part 2: Overview of process categories and
feedstock (ISO 17296-2:2015)
Additive Fertigung - Grundlagen - Teil 2: Überblick über Prozesskategorien und
Ausgangswerkstoffe (ISO 17296-2:2015)
Fabrication additive - Principes généraux - Partie 2: Vue d'ensemble des catégories de
procédés et des matières premières (ISO 17296-2:2015)
Ta slovenski standard je istoveten z: EN ISO 17296-2:2016
ICS:
25.030 3D-tiskanje Additive manufacturing
SIST EN ISO 17296-2:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17296-2:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 17296-2:2016
EN ISO 17296-2
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2016
EUROPÄISCHE NORM
ICS 25.040.20
English Version
Additive manufacturing - General principles - Part 2:
Overview of process categories and feedstock (ISO 17296-
2:2015)
Fabrication additive - Principes généraux - Partie 2: Additive Fertigung - Grundlagen - Teil 2: Überblick
Vue d'ensemble des catégories de procédés et des über Prozesskategorien und Rohmaterialien (ISO
matières premières (ISO 17296-2:2015) 17296-2:2015)
This European Standard was approved by CEN on 29 August 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17296-2:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17296-2:2016
EN ISO 17296-2:2016 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17296-2:2016
EN ISO 17296-2:2016 (E)
European foreword
The text of ISO 17296-2:2015 has been prepared by Technical Committee ISO/TC 261 “Additive
manufacturing” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 17296-2:2016 by Technical Committee CEN/TC 438 “Additive Manufacturing” the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2017, and conflicting national standards shall
be withdrawn at the latest by March 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17296-2:2015 has been approved by CEN as EN ISO 17296-2:2016 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 17296-2:2016
---------------------- Page: 6 ----------------------
SIST EN ISO 17296-2:2016
INTERNATIONAL ISO
STANDARD
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.