EN ISO 13297:2012
(Main)Small craft - Electrical systems - Alternating current installations (ISO 13297:2012)
Small craft - Electrical systems - Alternating current installations (ISO 13297:2012)
DOR should have been 2012-10-13.
2012-03-12 EMA: Draft for // vote received in ISO/CS (see notification of 2012-03-09 in dataservice).
2011-03-01 EMA: // 2nd ENQ draft received in ISO/CS (see notification from 2011-02-28 in dataservice).
Kleine Wasserfahrzeuge - Elektrische Systeme - Wechselstromanlagen (ISO 13297:2012)
Diese Internationale Norm legt die Anforderungen für die Auslegung, die Herstellung und die Installation von
elektrischen Niederspannungs-Wechselstromanlagen fest, die mit einer einphasigen Nennspannung von bis
zu 250 V auf kleinen Wasserfahrzeugen bis 24 m Rumpflänge betrieben werden.
Zusätzliche Informationen, die in das Handbuch für Schiffsführer aufgenommen werden müssen, sind in
Anhang B aufgeführt.
Petits navires - Systèmes électriques - Installations à courant alternatif (ISO 13297:2012)
Mala plovila - Električni sistemi - Inštalacije za izmenični tok (ISO 13297:2012)
Ta mednarodni standard določa zahteve za načrtovanje, gradnjo in namestitev nizkonapetostnih električnih sistemov inštalacij za izmenični tok, ki delujejo pri nazivni napetosti, nižji od 250 V pri eni fazi, na malih plovilih z dolžino trupa do 24 m.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2013
1DGRPHãþD
SIST EN ISO 13297:2001
0DODSORYLOD(OHNWULþQLVLVWHPL,QãWDODFLMH]DL]PHQLþQLWRN ,62
Small craft - Electrical systems - Alternating current installations (ISO 13297:2012)
Kleine Wasserfahrzeuge - Elektrische Systeme - Wechselstromanlagen (ISO
13297:2012)
Petits navires - Systèmes électriques - Installations de distribution de courant alternatif
(ISO 13297:2012)
Ta slovenski standard je istoveten z: EN ISO 13297:2012
ICS:
47.020.60 (OHNWULþQDRSUHPDODGLMLQ Electrical equipment of ships
NRQVWUXNFLMQDPRUMX and of marine structures
47.080 ýROQL Small craft
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 13297
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2012
ICS 47.080 Supersedes EN ISO 13297:2000
English Version
Small craft - Electrical systems - Alternating current installations
(ISO 13297:2012)
Petits navires - Systèmes électriques - Installations à Kleine Wasserfahrzeuge - Elektrische Systeme -
courant alternatif (ISO 13297:2012) Wechselstromanlagen (ISO 13297:2012)
This European Standard was approved by CEN on 30 September 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13297:2012: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 94/25/EC, as amended by Directive 2003/44/EC .4
Foreword
This document (EN ISO 13297:2012) has been prepared by Technical Committee ISO/TC 188 "Small craft".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2013, and conflicting national standards shall be withdrawn at the
latest by April 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13297:2000.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13297:2012 has been approved by CEN as a EN ISO 13297:2012 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 94/25/EC, as amended by
Directive 2003/44/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directives 94/25/EC, as amended by Directive 2003/44/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of
conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and EU Directives
Corresponding annexes/Paragraphs
Clause(s)/sub-clause(s) of this
of Directive 94/25/EC as amended Comments
European Standard
2003/44/EC
All clauses Annex IA2, Clause 5.3, Electrical
systems.
Clause 11 Annex IA2, Clause 5.6.1 Fire protection In respect of avoiding wiring above hot
areas of machines.
Annex B Annex IA2, Clause 2.5 Owner's manual
WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling within the
scope of this standard.
INTERNATIONAL ISO
STANDARD 13297
Third edition
2012-10-01
Small craft — Electrical systems —
Alternating current installations
Petits navires — Systèmes électriques — Installations à courant alternatif
Reference number
ISO 13297:2012(E)
©
ISO 2012
ISO 13297:2012(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
ISO 13297:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General requirements . 4
5 Marking . 6
6 Ignition sources . 7
7 Overcurrent protection . 7
7.1 General . 7
7.2 Supply circuits . 7
7.3 Branch circuits . 8
8 Ground-fault protection/earth-leakage protection. 8
9 Appliances and equipment . 8
10 System wiring . 8
11 Conductor and cable installation . 9
12 Panel boards (switchboards) . 11
13 Socket outlets . 11
14 Power source options .12
15 Inverters and inverter/chargers .12
Annex A (normative) Conductor requirements.15
Annex B (normative) Instructions to be included with owner’s manual .17
Annex C (informative) Recommended system tests .18
Annex D (informative) Typical a.c. system diagrams .19
Annex E (informative) Typical battery charger/inverter diagrams .23
Bibliography .25
ISO 13297:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 13297 was prepared by Technical Committee ISO/TC 188, Small craft.
This third edition cancels and replaces the second edition (ISO 13297:2000), which has been technically revised.
iv © ISO 2012 – All rights reserved
INTERNATIONAL STANDARD ISO 13297:2012(E)
Small craft — Electrical systems — Alternating current
installations
IMPORTANT — The colours represented in the electronic file of this document can be neither viewed on screen
nor printed as true representations. Although the copies of this document printed by ISO have been produced
to correspond (with an acceptable tolerance as judged by the naked eye) to the requirements of ISO 3864-4, it is
not intended that these printed copies be used for colour matching. Instead, consult ISO 3864-4, which provides
colorimetric and photometric properties together with, as a guideline, references from colour order systems.
1 Scope
This International Standard specifies the requirements for the design, construction and installation of low-
voltage alternating current electrical systems which operate at nominal voltages of less than 250 V single
phase on small craft of hull length up to 24 m.
Additional information to be included in the owner’s manual is listed in Annex B.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 7010, Graphical symbols — Safety colours and safety signs — Registered safety signs
ISO 8846, Small craft — Electrical devices — Protection against ignition of surrounding flammable gases
1)
ISO 10133:2000 , Small craft — Electrical systems — Extra low voltage d.c. installation
ISO 102
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.