Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers

This European Standard is applicable to fastening systems, in categories A - C and E as specified in EN 13481 1:2012, 3.1, for use on wood sleepers in ballasted track with maximum axle loads and minimum curve radii in accordance with Table 1.
Table 1 - Fastening category criteria
Category   Maximum design axle load
kN   Minimum curve radius
m
A   130   40
B   180   80
C   260   150
E   350   150
NOTE   The maximum axle load for categories A and B does not apply to maintenance vehicles.
The requirements apply to:
-   fastening systems which act on the foot and/or web of the rail including direct fastening systems and indirect fastening systems;
-   fastening systems for the rail sections in EN 13674-1 (excluding 49E4) and EN 13674-4+A1.
This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints or glued joints.
This standard is for type approval of a complete fastening assembly only.

Bahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 3: Befestigungssysteme für Holzschwellen

Diese Europäische Norm gilt für Schienenbefestigungssysteme der Kategorien A – C und E wie in FprEN 13481-1:2010,3.1 festgelegt für die Verwendung von Holzschwellen im Schotteroberbau mit den maximalen Auslegungsachslasten und Mindest-Gleisbogenhalbmessern nach Tabelle 1.
Die Anforderungen gelten für:
-   Befestigungssysteme, die am Fuß und/oder am Schienensteg wirken, einschließlich direkter und indirekter Befes¬tigungssysteme;
-   Befestigungssysteme für Schienenprofile nach EN 13674-1 (ausgenommen 49 E4) und EN 13674-4.
Diese Norm gilt nicht für Befestigungssysteme für andere Schienenprofile, starre Befestigungssysteme oder spezielle Befestigungssysteme mit verschraubten oder geklebten Schienenstößen.
Diese Norm gilt ausschließlich für die Typzulassung eines kompletten Schienenbefestigungssystems.

Applications ferroviaires - Voie - Exigences de performance pour les systèmes de fixation - Partie 3: Systèmes de fixation pour traverses en bois

La présente Norme européenne est applicable aux systèmes de fixation des catégories A à C et E comme spécifiée dans l’EN 13481 1:2012, 3.1, pour utilisation sur des traverses en bois en voie ballastée avec des charges à l’essieu maximales et des rayons de courbure minimaux selon le Tableau 1.
Les exigences s’appliquent :
-   aux systèmes de fixation qui agissent sur le patin et/ou l’âme du rail, y compris les systèmes de fixation directs et les systèmes avec selle ;
-   aux systèmes de fixation pour les profils de rail décrits dans l’EN 13674-1 (à l’exclusion du profil 49E4) et l’EN 13674-4.
La présente norme ne s'applique pas aux systèmes de fixation pour d’autres profils de rail, aux systèmes de fixation rigides, ou aux systèmes de fixation spéciaux au droit des éclisses.
La présente norme s'applique uniquement à la qualification d’un système de fixation complet.

Železniške naprave - Zgornji ustroj - Zahteve za izdelavo pritrdilnih sistemov - 3. del: Pritrdilni sistemi za lesene prage

Ta evropski standard se uporablja za pritrdilne sisteme iz kategorij A do C in E iz točke 3.1 standarda EN 13481-1:2012 za lesene prage pri zgornjem ustroju s tamponskim slojem, ki imajo največjo osno obremenitev in najmanjši krivinski polmer v skladu s preglednico 1. Zahteve se uporabljajo za: – pritrdilne sisteme, ki delujejo na vznožje in/ali stojino tirnice, vključno z neposrednimi in posrednimi pritrdilnimi sistemi; – pritrdilne sisteme za dele železnice iz standardov EN 13674-1 (razen 49E4) in EN 13674-4. Ta standard se ne uporablja za pritrdilne sisteme za druge dele železnice, toge pritrdilne sisteme ali posebne pritrdilne sisteme, ki se uporabljajo pri zakovičenih spojih ali zlepljenih spojih. Ta standard se uporablja samo za odobritev tipa celotnega pritrdilnega sestava.

General Information

Status
Withdrawn
Publication Date
29-May-2012
Withdrawal Date
12-Jul-2022
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
13-Jul-2022

Relations

Buy Standard

Standard
EN 13481-3:2012
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Zgornji ustroj - Zahteve za izdelavo pritrdilnih sistemov - 3. del: Pritrdilni sistemi za lesene prageBahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 3: Befestigungssysteme für HolzschwellenApplications ferroviaires - Voie - Exigences de performance pour les systèmes de fixation - Partie 3: Systèmes de fixation pour traverses en boisRailway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers93.100Gradnja železnicConstruction of railwaysICS:Ta slovenski standard je istoveten z:EN 13481-3:2012SIST EN 13481-3:2012en,fr01-september-2012SIST EN 13481-3:2012SLOVENSKI
STANDARDSIST EN 13481-3:2004/A1:2007SIST EN 13481-3:20041DGRPHãþD



SIST EN 13481-3:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13481-3
May 2012 ICS 93.100 Supersedes EN 13481-3:2002English Version
Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers Applications ferroviaires - Voie - Exigences de performance pour les systèmes de fixation - Partie 3: Systèmes de fixation pour traverses en bois
Bahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 3: Befestigungssysteme für Holzschwellen This European Standard was approved by CEN on 27 April 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13481-3:2012: ESIST EN 13481-3:2012



EN 13481-3:2012 (E) 2 Contents Page Foreword . 3Introduction . 41Scope . 52Normative references . 53Terms and definitions . 64Symbols . 65Requirements . 75.1General . 75.2Longitudinal rail restraint . 85.3Torsional resistance . 85.4Pad and assembly stiffness . 85.5Effect of repeated loading . 85.6Effect of exposure to severe environmental conditions. 95.7Dimensions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.