EN 1870-6:2002+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading

This document deals with the significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to firewood and dual-purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading, hereinafter referred to as machines, designed to cut solid wood.
On Combined circular sawing machines for firewood - Log splitting machines only the circular sawing machine for firewood is covered by this European Standard. For the requirements for the log splitting part of this machine see EN 609-1: 1999 and EN 609-2: 1999.
!deleted text"
For Computer Numerically Controlled (CNC) machines this European Standard does not cover hazards related to Electro-Magnetic Compatibility (EMC).
This European Standard does not apply to:
-   log sawing machines where the saw unit moves to cut the workpiece;
-   machines where the sawblade is capable of tilting;
-   hand-held motor-operated electric tools or any adaptation permitting their use in a different mode, i.e. bench mounting;
NOTE 1   Hand-held motor-operated electric tools and saw benches to form an integrated whole with a hand-held motor-operated electric tools are covered by EN 60745-1:2006 together with EN 60745-2-5:2007.
-   machines driven by an internal combustion engine
This European Standard is primarily directed at machines which are manufactured after the date of issue of this European Standard.
NOTE 2   Machines covered by this European Standard are listed under A.1.1 and/or A.1.2 of annex IV of the Machinery Directive

Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 6: Brennholzkreissägemaschinen und kombinierte Brennholz- und Tischkreissägemaschinen, mit Handbeschickung und/oder Handentnahme

Dieses Dokument detailliert alle in Abschnitt 4 aufgeführten signifikanten Gefährdungen, Gefährdungs-situationen und Gefährdungsereignisse, die auf Brennholzkreissägemaschinen und kombinierte Brennholz- und Tischkreissägemaschinen mit Handbeschickung und / oder Handentnahme zutreffen - im Folgenden als "Maschinen" bezeichnet - die zum Schneiden von Massivholz konstruiert sind.
Diese Europäische Norm behandelt bei einer kombinierten Brennholzkreissägemaschine und Holz¬spalt-maschine nur den Brennholzkreissägenteil. Hinsichtlich der Anforderungen für den holzspaltenden Teil dieser Maschine siehe EN 609-1:1999 und EN 609-2:1999.
Diese Europäische Norm behandelt bei CNC-Maschinen nicht die Gefährdungen im Zusammenhang mit der elektromagnetischen Verträglichkeit (EMV).
Diese Europäische Norm gilt nicht für:
-   Rundholzsägemaschinen, bei denen zum Schneiden des Werkstücks das Sägeaggregat bewegt wird (Brennholzkappsägemaschinen);
-   Maschinen mit schrägstellbarem Sägeblatt;
-   handgeführte motorbetriebene Elektrowerkzeuge oder irgendwelche Einrichtungen, die ihre Verwen-dung in einer anderen Weise, z. B. in einer Stationäreinrichtung, ermöglichen;
ANMERKUNG 1   Handgeführte motorbetriebene Elektrowerk¬zeuge und Sägetische, die eine Gesamtheit mit einem handge¬führten motorbetriebenen Elektrowerkzeug bilden, sind in EN 60745-1:2006 zusammen mit EN 60745-2-5:2007 erfasst.
-   Maschinen mit Antrieb durch eingebauten Verbrennungsmotor.
Diese Europäische Norm ist in erster Linie auf Maschinen anzuwenden, die nach dem Datum der Herausgabe dieser Europäischen Norm hergestellt werden.
ANMERKUNG 2   Die von dieser Europäischen Norm erfassten Maschinen sind in der Maschinenrichtlinie 98/37/EG, A.1.1 und A.1.2 aufgeführt.

Sécurité des machines pour le travail du bois - Machines à scie circulaire - Partie 6 : Scies circulaires à chevalet et/ou à table pour la coupe du bois de chauffage, avec chargement et/ou déchargement manuel

!Le présent document traite des phénomènes, des situations et des événements dangereux significatifs tels qu’énumérés à l’Article 4, applicables aux scies circulaires à chevalet et/ou à table pour la coupe du bois de chauffage, à chargement et/ou déchargement manuel, ci-après désignées «machines», conçues pour la coupe de bois massif"
En ce qui concerne les scies circulaires combinées à bois de chauffage et à fendre les bûches, seule la scie circulaire à bois de chauffage est couverte par la présente norme. En ce qui concerne les prescriptions pour la partie fendeuse de bûches de ces machines voir l’EN 609-1:1999 et l'EN 609-2:1999.
!texte supprimé"
Pour les machines à commande numérique, la présente Norme européenne ne traite pas des phénomènes dangereux liés à la compatibilité électromagnétique (CEM).
La présente Norme européenne ne s'applique pas aux :
-   scies à grumes dont l'unité de sciage se déplace pour scier la pièce de bois ;
-   machines avec une lame de scie inclinable ;
-   !outils électroportatifs à moteur ou toute adaptation permettant leur utilisation de manière différente, c’est-à-dire fixés sur un établi ;"
NOTE 1   !Les outils électroportatifs à moteur et les scies à table destinés à former un ensemble intégré avec des outils électroportatifs à moteur sont couverts par l’EN 60745-1:2006 et l’EN 60745 2 5:2007."
-   machines entraînées par moteur alternatif a combustion interne.
La présente Norme européenne est applicable avant tout aux machines fabriquées après la date de publication de la présente Norme européenne.
NOTE 2   Les machines couvertes par cette Norme européenne sont énumérées à l'annexe IV, paragraphe A.1.1 et/ou A.1.2 de la directive machines.

Varnost lesnoobdelovalnih strojev - Krožne žage - 6. del: Krožne žage za drva in večnamenske žage za drva z delovno mizo z ročnim podajanjem in/ali odvzemom

General Information

• Status: Withdrawn
• Publication Date: 29-Sep-2009
• Withdrawal Date: 31-Oct-2017
• ICS: 79.120.10 - Woodworking machines
• Technical Committee: CEN/TC 142 - Woodworking machines - Safety
• Drafting Committee: CEN/TC 142/WG 4 - Circular sawing machines
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 01-Nov-2017
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 1870-6:2003+A1:2009 - Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading

Relations

• Merged From: EN 1870-6:2002 - Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading
• Effective Date: 18-Jul-2009
• Merged From: EN 1870-6:2002/prA1 - Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading
• Effective Date: 18-Jul-2009
• Replaced By: EN 1870-6:2017 - Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2009
9DUQRVWOHVQRREGHORYDOQLKVWURMHY.URåQHåDJHGHO.URåQHåDJH]DGUYDLQ
YHþQDPHQVNHåDJH]DGUYD]GHORYQRPL]R]URþQLPSRGDMDQMHPLQDOLRGY]HPRP
Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing
machines for firewood and dual purpose circular sawing machines for firewood/circular
saw benches, with manual loading and/or unloading
Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 6:
Brennholzkreissägemaschinen und kombinierte Brennholz- und
Tischkreissägemaschinen, mit Handbeschickung und/oder Handentnahme
Sécurité des machines pour le travail du bois - Machines à scies circulaires - Partie 6:
Scies circulaires à chevalet et/ou à table pour la coupe du bois de chauffage, avec
chargement et/ou déchargement manuel
Ta slovenski standard je istoveten z: EN 1870-6:2002+A1:2009
ICS:
25.080.60 Strojne žage Sawing machines
79.120.10 Lesnoobdelovalni stroji Woodworking machines
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 1870-6:2002+A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2009
ICS 79.120.10 Supersedes EN 1870-6:2002
English Version
Safety of woodworking machines - Circular sawing machines -
Part 6: Circular sawing machines for firewood and dual purpose
circular sawing machines for firewood/circular saw benches, with
manual loading and/or unloading
Sécurité des machines pour le travail du bois - Machines à Sicherheit von Holzbearbeitungsmaschinen -
scies circulaires - Partie 6: Scies circulaires à chevalet Kreissägemaschinen - Teil 6:
et/ou à table pour la coupe du bois de chauffage, avec Brennholzkreissägemaschinen und kombinierte Brennholz-
chargement et/ou déchargement manuel und Tischkreissägemaschinen, mit Handbeschickung
und/oder Handentnahme
This European Standard was approved by CEN on 8 November 2001 and includes Amendment 1 approved by CEN on 13 August 2009.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1870-6:2002+A1:2009: E
worldwide for CEN national Members.

Contents
Foreword . 3
0 Introduction . 5
1 Scope . 5
2 Normative references . 6
3 Terms and definitions . 8
3.1 Terms . 8
3.2 Definitions . 11
4 List of significant hazards . 13
5 Safety requirements and/or measures . 16
5.1 Controls . 16
5.2 Protection against mechanical hazards . 20
5.3 Protection against non-mechanical hazards . 45
6 Information for use . 49
6.1 Warning devices . 49
6.2 Marking . 49
6.3 Instruction handbook . 50
Annex A (normative) Stability test . 54
A.1 Torsional resistance test for the pivoting log carriage. 54
A.2 Rigidity test for a dual-purpose circular sawing machine for firewood/circular saw bench
machine set in the saw bench mode . 55
A.3 Stability test for pivoting log carriage machines . 55
Annex B (normative) Saw spindle dimensional tolerances . 57
Annex C (normative) Riving knife mounting strength test . 58
Annex D (normative)  Riving knife lateral stability test . 59
Annex E (normative) Test for safe log (workpiece) positioning on circular sawing machines for
firewood with pivoting log carriage . 60
Annex F (normative) Saw bench table minimum dimensions on dual-purpose circular sawing
machines for firewood/circular saw benches . 61
Annex G (normative) Saw blade guard stability test for dual purpose circular sawing machines
for firewood/circular saw benches. 62
G.1 General . 62
G.2 Machines with saw blade guards with lead-in . 62
G.3 Machines with saw blade guards with in-feed rollers . 62
Annex ZA (informative) !!Relationship between this European Standard and the Essential
!!
Requirements of EU Directive 98/37/EC"""" . 65
Annex ZB (informative) !!!!Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC"""" . 66
Bibliography . 67

Foreword
This document (EN 1870-6:2002+A1:2009) has been prepared by Technical Committee 142, "Woodworking
machines - Safety", the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at
the latest by March 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document includes Amendment 1, approved by CEN on 2009-08-13.
This document supersedes EN 1870-6:2002.
The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ".
!This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of the Machinery Directive.
For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document."
Organisations contributing to the preparation of this European Standard include European Committee of
Woodworking Machinery Manufacturers Association "EUMABOIS".
Annexes A, B, C, D, E, F and G are normative and !Annexes ZA and ZB" are informative.
The European Standards produced by CEN/TC 142 are particular to woodworking machines and complement
the relevant A and B Standards on the subject of general safety (see introduction of
!EN ISO 12100-1:2003" for a description of A, B and C standards).
!EN 1870 Safety of woodworking machines — Circular sawing machines consists of the following parts:
Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
Part 4: Multi-blade rip sawing machines with manual loading and/or unloading
Part 5: Circular saw -benches/up-cutting cross-cut sawing machines
Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular
saw benches, with manual loading and/or unloading
Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading
and/or unloading
Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading
and/or unloading
Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm
saws)
Part 12: Pendulum cross-cut sawing machines
Part 13: Horizontal beam panel sawing machines
Part 14: Vertical panel sawing machines
Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading
and/or unloading
Part 16: Double mitre sawing machines for V-cutting
Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws)"
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and United Kingdom.
0 Introduction
This European Standard has been prepared to be a harmonised standard to provide one means of conforming
to the essential safety requirements of the Machinery Directive, and associated EFTA regulations. This
European Standard is a type “C” standard as defined in !EN ISO 12100-1:2003".
The extent to which hazards are covered is indicated in the scope of this European Standard.
The requirements of this European Standard concern designers, manufacturers, suppliers and importers of
circular sawing machines for firewood and dual-purpose circular sawing machines for firewood/circular saw
benches, with manual loading and/or unloading.
This European Standard also includes information to be provided by the manufacturer to the user.
Common requirements for tooling are given in !EN 847-1:2005".
1 Scope
!This document deals with all significant hazards, hazardous situations and events as listed in Clause 4
which are relevant to firewood and dual-purpose circular sawing machines for firewood/circular saw benches,
with manual loading and/or unloading, hereinafter referred to as “machines”, designed to cut solid wood."
On Combined circular sawing machines for firewood - Log splitting machines only the circular sawing machine
for firewood is covered by this European Standard. For the requirements for the log splitting part of this
machine see EN 609-1: 1999 and EN 609-2: 1999.
!deleted text"
For Computer Numerically Controlled (CNC) machines this European Standard does not cover hazards
related to Electro-Magnetic Compatibility (EMC).
This European Standard does not apply to:
 log sawing machines where the saw unit moves to cut th
...