EN 29592-3:1991/A1:1993

Information processing systems - Computer graphics - Programmer's Hierarchical Interactive Graphics System (PHIGS) - Part 3: Clear-text encoding of archive file (ISO/IEC 9592-3:1989, Amendment 1:1992)

Graphische Systeme der Informationsverarbeitung - Hierarchisches Interaktives Graphisches System für Programmierer - Teil 3: Kodierung der Archiv-Datei mit Text (ISO/IEC 9592-3:1989, Änderung 1:1992)

Systèmes de traitement de l'information - Infographie - Interface de programmation du système graphique hiérarchisé (PHIGS) - Partie 3: Codage mode texte en clair du fichier d'archive (ISO/IEC 9592-3:1989, Amendment 1:1992)

La CEI 60811-202:2012 décrit les méthodes pour la mesure des épaisseurs des gaines non-métalliques, qui s'appliquent aux types les plus courants des mélanges utilisés pour les gaines (réticulés, PVC, PE, PP, etc.). La CEI 60811-202:2012 annule et remplace 8.2 de la CEI 60811-1-1:1993, qui est supprimée. L'ensemble des informations relatives aux remplacements figure dans l'Annexe A de la CEI 60811-100:2012. Aucune modification technique n'a été effectuée par rapport à l'édition précédente; voir cependant l'avant-propos de la CEI 60811-100:2012.
Cette publication doit être lue conjointement avec la CEI 60811-100:2012.

Information processing systems - Computer graphics - Programmer's Hierarchical Interactive Graphics System (PHIGS) - Part 3: Clear-text encoding of archive file (ISO/IEC 9592-3:1989, Amendment 1:1992)

General Information

• Status: Withdrawn
• Publication Date: 26-Sep-1993
• Withdrawal Date: 03-Jul-2001
• ICS: 35.140 - Computer graphics
• Technical Committee: CEN/SS F12 - Information processing systems
• Drafting Committee: CEN/SS F12 - Information processing systems
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 04-Jul-2001
• Completion Date: 04-Jul-2001
• Ref Project: SIST EN 29592-3:1997/A1:1997 - Information processing systems - Computer graphics - Programmer's Hierarchical Interactive Graphics System (PHIGS) - Part 3: Clear-text encoding of archive file (ISO/IEC 9592-3:1989, Amendment 1:1992)

Relations

• Amends: EN 29592-3:1991 - Information processing systems - Computer graphics - Programmer's Hierarchical Interactive Graphics System (PHIGS) - Part 3: Clear-text encoding of archive file (ISO/IEC 9592-3:1989, ed. 1)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 29592-3:1997/A1:1997
01-december-1997
Information processing systems - Computer graphics - Programmer's Hierarchical
Interactive Graphics System (PHIGS) - Part 3: Clear-text encoding of archive file
(ISO/IEC 9592-3:1989, Amendment 1:1992)
Information processing systems - Computer graphics - Programmer's Hierarchical
Interactive Graphics System (PHIGS) - Part 3: Clear-text encoding of archive file
(ISO/IEC 9592-3:1989, Amendment 1:1992)
Graphische Systeme der Informationsverarbeitung - Hierarchisches Interaktives
Graphisches System für Programmierer - Teil 3: Kodierung der Archiv-Datei mit Text
(ISO/IEC 9592-3:1989, Änderung 1:1992)
Systemes de traitement de l'information - Infographie - Interface de programmation du
systeme graphique hiérarchisé (PHIGS) - Partie 3: Codage mode texte en clair du fichier
d'archive (ISO/IEC 9592-3:1989, Amendment 1:1992)
Ta slovenski standard je istoveten z: EN 29592-3:1991/A1:1993
ICS:
35.140 5DþXQDOQLãNDJUDILND Computer graphics
SIST EN 29592-3:1997/A1:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 29592-3:1997/A1:1997

---------------------- Page: 2 ----------------------

SIST EN 29592-3:1997/A1:1997

---------------------- Page: 3 ----------------------

SIST EN 29592-3:1997/A1:1997

---------------------- Page: 4 ----------------------

SIST EN 29592-3:1997/A1:1997
ISOIIEC
INTER NATIONAL
9592-3
STAN DAR D
First edition
1989-04-01
AMENDMENT 1
1992-09-01
Information processing systems - Computer
graphics - Programmerls Hierarchical
Interactive Graphics System (PHIGS) -
Part 3 :
Clear-text encoding of archive file
AMENDMENT 1
Systèmes de traitement de l'information - Infographie - Interface de
programmation du système graphique hiérarchisé (PHIGS) -
Partie 3 : Codage mode texte en clair du fichier d'archive
AMENDEMENT I

---------------------- Page: 5 ----------------------

SIST EN 29592-3:1997/A1:1997
ISO/IEC 9592-3 : 1989/Amd.l : 1992 (E)
Foreword
IS0 (the International Organization for Standardization) and IEC (the International
Electrotechnical Commission) form the specialized system for worldwide standardiz-
ation. National bodies that are members of IS0 or IEC participate in the development
of International Standards through technical committees established by the respective
organization to deal with particular fields of technical activity. IS0 and IEC technical
committees collaborate in fields of mutual interest. Other international organizations,
governmental and non-governmental, in liaison with IS0 and IEC, also take part in the
work.
In the field of information technology, IS0 and IEC have established a joint technical
committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint
technical committee are circulated to national bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the national bodies casting
a vote.
Amendment 1 to International Standard ISO/IEC 9592-3 : 1989 was prepared by Joint
Technical Committee ISO/IEC JTC 1, lnformarion technology.
O ISOIIEC 1992
All rights reserved. No part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in
writing from the publisher.
ISOIIEC Copyright Office Case postale 56 CH-1211 Genève 20 Switzerland
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN 29592-3:1997/A1:1997
ISO/IEC 9592-3 : 19WAmd.l : 1992 (E)
Introduction
This amendment specifies the additions and changes to ISO/IEC 9592-3 to support the structure elements specified in
ISOAEC 9592-4. A clear text encoding is specified for each of the structure element types specified in ISOAEC 9592-4.
Unless otherwise specified, all references in this amendment refer to ISODEC 9592-3.
iii

---------------------- Page: 7 ----------------------

SIST EN 29592-3:1997/A1:1997

---------------------- Page: 8 ----------------------

SIST EN 29592-3:1997/A1:1997
ISOlIEC 9592-3:1989/Amd.l:1992(E)
Information processing systems-Computer graphics-
Programmer’s Hierarchical Interactive Graphics System (PH1GS)-
Part 3: Clear-text encoding of archive file
Amendment 1
Page 12
4.2.4.5 Derived types
Add the following:
COLRCURVE ::=

a
cRLIST:KNOTS>


eCOLRVLIST: CONTROL-POINTS>

COLRSURF ::=








NOTE: Each COLRVLIST contains control points along the U dimension.
e
COLRV ::= <
I
>
COLRVLIST ::=
< < >* >O

COLRVLISTS
::=
< < cCOLRVLIST>>* >O

1

---------------------- Page: 9 ----------------------

SIST EN 29592-3:1997/A1:1997
ISOLEC 9592-3: 1989/Amd.l: 1992(E)
::= COLRVLISTS
COLRVROWS
::=
COORDLIST
<< SEP> >*

::=
CURVEAPPROXDATAREC
<
I
I >o
>
::=
D ATAM APPINGD ATAREC
<
CDATAMAPPINGDATAREC 1>
I
I cDATAM APPINGDATARECû
I
I cDATAMAPPINGDATAREC5>
I &METHOD-DEPENDENT-DATA>
>O

::=
DATAMAPPINGDATAREC 1
::=
DATAMAPPINGDATAREC2




cC0RLVLIST:COLOUR-LIST>
: := < S EP>
DATAMAPPINGDATAREC3
&INDEX>


::=
DATAMAPPINGDATAREC4








2

---------------------- Page: 10 ----------------------

SIST EN 29592-3:1997/A1:1997
ISO/IEC 9592-3: 1989/Amd.l: 1992(E)
DATAMAPPINGDATARECS ::=





DATASURF ::=






NOTE: Each RLIST is a single control point. Each KLISTS contains conkol points along the U dimension.
DATASURFLIST ::=
< >*

::= <
EDGEDATAFLAG
NONE
I EDGE-VISIBILITY-FLAGS
>
EDGEFLAG ::=
EDGEFLAG2 ::=


EDGEFLAG2ROW ::=
< < >* >O

EDGEFLAG3 ::=


EDGEFLAG3LIST ::=
< < >* >O

EDGEFLAGLIST ::=
< < >* >O

EDGEFLAGLISTS ::=
< < >* >O

3

---------------------- Page: 11 ----------------------

SIST EN 29592-3:1997/A1:1997
ISOAEC 9592-3 1989/Amd.l: 1992(E)
::= CLEFT PAREN>
EDGEFL AGLISTSLIST
c >* >O
cOPTSEP>
::=
EDGEFLAGROW
::= CLEFT PAREN>
FACETDATA
cCOLRV>o
«SEP> cV3:UNIT_NORMAL>>o
«SEP> cRLIST:DATA-MAPPING-DATA»o
cOPTSEb
::= c
FACETDATAFLAG
NONE
I FACET-COLR
I FACET-NORMAL
I FACET-DATA
I FACET-COLRNORMAL
I FACET-COLR-DATA
I FACET-NORMAL-DATA
I FACET-COLRNORMAL-DATA
>
::=
FACETDATALIST
c < >* >O

FACETDATALISTS ::= CLEFT PAREN>
< < O

::=
FACETDATAROW
::=
GCOLR
::= CLEFT PAREN>
INT3
CI> CI>

::= CLER PAREN>
INT3LIST
c < >* >O
cOPTSEP> >
INT3LISTS ::=
< cINT3LIST> < * >O
cOPTSEP> >
INTLIST ::= CLEFT PAREN>
c CI> < >* >O
>
4

---------------------- Page: 12 ----------------------

SIST EN 29592-3:1997/A1:1997
ISO/IEC 9592-3: 1989/Amd.l:1992(E)
INTLISTS
::=
< «SEP> >* >O
INTLISTSLIST ::=
< < >* >O
P4 ::= <

I
>
POINT4 ::=



POINTLIST4 ::= < < >* >O
PARAMSURFCHARACDATAREC ::=
<

I
I
>O

PARAMSURFCHARACDATAREC3 ::=


PARAMSURFCHARACDATAREC4 ::=


REFLPROPSDATAREC :==
<

I
>O

REFLPROPSDATAREC 1 ::=




5

---------------------- Page: 13 ----------------------

SIST EN 29592-3:1997/A1:1997
ISO/IEC 9592-3:1989/Amd.l:1992(E)
RLIST ::=
< < >* >O

RLISTS ::=
< < >* >O

RLISTSLIST ::=
< < >* >O

..-
SOURCESELECTOR .- <
COLOUR-ASPECT
I VERTEX-COLOUR
I VERTEX-DATA
I FACET-COLOUR
I FACET-DATA
>
SOURCESELECTORLIST ::=
< <>* >O

::=
SURFAPPROXDATAREC
<
I
I

I >o
>
::=
TRIMCURVE






<

>
I
>
>

TRIMLOOP ::=
< >*

6

---------------------- Page: 14 ----------------------

SIST EN 29592-3:1997/A1:1997
ISO/IEC 9592-3:1989/Amd.l:1992(E)
TRIMLOOPLIST ::=
< >*

VERTEXDATA2 ::=

< >o
< <>o

VERTEXDATA2LIST ::=
< < O

VERTEXDATA2LISTS ::= < < >* >O
a

VERTEXDATA3 ::=

< >o
< >o
< >o

VERTEXDATA3LIST ::=
< < >* >O

VERTEXDATA3LISTS ::=
< < >* >O

. .-
VERTEXDATAFLAG .- <
COORD
I COORDCOLR
I COORDNORMAL
I COORD-DATA
I COORDCOLRNORMAL
I COORDCOLR-DATA
I ~~~~~~~~~~~~DATA
I COORDCOLRNORMAL-DATA
>
VERTEXDATAPL3 ::=

< >o

7

---------------------- Page: 15 ----------------------

SIST EN 29592-3:1997/A1:1997
ISOIIEC 9592-3:1989/Amd.l:1992@)
VERTEXDATAPL3LIST ::=
c < cVERTEXDATAPL3»* >O

VERTEXDATAPL3LISTS ::=
< < >* >O

Page 14
4.2.5.1 Terms deleted
Add the following:
OF, WITH
4.2.5.3 Words used unabbreviated
a
Add the following:
BACK, CURVE, DATA, FRONT, LIGHT, MAPPING, MODE
4.2.5.4 Abbreviations
Add the following:
APPROXIMATION APPROX
CHmAC
CHARACTERISTICS
CRITERIA CRIT
CULL
CULLING
DEPTH CUE DEPTHCUE
DISTINGUISHING DIST
METHOD METH
NUNIBSP
NON-UNIFORMB-SPLINE
PARAM
PARAMETRIC
a
PROPS
PROPERTIES
QUAD
QUADRILATERAL
REFLECTANCE REFL
RENDERING REND
SHADING SHAD
SOURCE SRC
SURFACE SURF
TRIANGLE TRI
TRIMMING CURVE TRIMCURV
8

---------------------- Page: 16 ----------------------

SIST EN 29592-3:1997/A1:1997
ISO/IEC 9
...