EN ISO 17074:2011

Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame (ISO 17074:2006)

ISO 17074:2006 specifies a method for determining the horizontal burning rate of leather. It is applicable to all light leathers but is particularly intended for leathers used in the passenger compartment of motor vehicles.

Leder - Physikalische und mechanische Prüfungen - Bestimmung der Widerstandsfähigkeit gegen die horizontale Ausbreitung von Flammen (ISO 17074:2006)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der horizontalen Brenngeschwindigkeit von Leder fest. Sie ist auf alle leichten Leder anwendbar, jedoch insbesondere für Lederarten vorgesehen, die im Fahrgastraum von Kraftfahrzeugen Anwendung finden.
ANMERKUNG   Bei diesem Verfahren wird die in ISO 3795 festgelegte Prüfeinrichtung verwendet, es schließt jedoch spezielle Festlegungen für die Probenahme, die Konditionierung und die Prüfung von Leder ein.

Cuir - Essais physiques et mécaniques - Détermination de la résistance à la propagation horizontale de la flamme (ISO 17074:2006)

L'ISO 17074:2006 spécifie une méthode de détermination de la vitesse de combustion horizontale du cuir. Elle s'applique à tous les cuirs légers et, en particulier, aux cuirs utilisés dans l'habitacle des véhicules automobiles.

Usnje - Fizikalno in mehansko preskušanje - Ugotavljanje odpornosti proti horizontalno razpršenemu plamenu (ISO 17074:2006)

ISO 17074:2006 določa metodo za ugotavljanje horizontalne hitrosti gorenja usnja. Velja za vse vrste lahkega usnja, predvsem pa za tiste, ki se uporabljajo v prostorih za potnike v motornih vozilih.

General Information

• Status: Published
• Publication Date: 13-Sep-2011
• Withdrawal Date: 30-Mar-2012
• ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
• ICS: 59.140.30 - Leather and furs
• Technical Committee: CEN/TC 289 - Leather
• Drafting Committee: CEN/TC 289/WG 2 - Physical test methods
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 14-Sep-2011
• Due Date: 11-Jun-2012
• Completion Date: 14-Sep-2011
• Ref Project: SIST EN ISO 17074:2011 - Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame (ISO 17074:2006)

Relations

• Replaces: EN 14326:2003 - Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame
• Effective Date: 17-Sep-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17074:2011
01-november-2011
1DGRPHãþD
SIST EN 14326:2004
Usnje - Fizikalno in mehansko preskušanje - Ugotavljanje odpornosti proti
horizontalno razpršenemu plamenu (ISO 17074:2006)
Leather - Physical and mechanical tests - Determination of resistance to horizontal
spread of flame (ISO 17074:2006)
Leder - Physikalische und mechanische Prüfungen - Bestimmung der
Widerstandsfähigkeit gegen die horizontale Ausbreitung von Flammen (ISO 17074:2006)
Cuir - Essais physiques et mécaniques - Détermination de la résistance à la propagation
horizontale de la flamme (ISO 17074:2006)
Ta slovenski standard je istoveten z: EN ISO 17074:2011
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
59.140.30 Usnje in krzno Leather and furs
SIST EN ISO 17074:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17074:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 17074:2011


EUROPEAN STANDARD
EN ISO 17074

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2011
ICS 59.140.30 Supersedes EN 14326:2003
English Version
Leather - Physical and mechanical tests - Determination of
resistance to horizontal spread of flame (ISO 17074:2006)
Cuir - Essais physiques et mécaniques - Détermination de Leder - Physikalische und mechanische Prüfungen -
la résistance à la propagation horizontale de la flamme Bestimmung der Widerstandsfähigkeit gegen die
(ISO 17074:2006) horizontale Ausbreitung von Flammen (ISO 17074:2006)
This European Standard was approved by CEN on 18 August 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17074:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17074:2011
EN ISO 17074:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 17074:2011
EN ISO 17074:2011 (E)
Foreword
The text of ISO 17074:2006 has been prepared by International Union of Leather Technologists and Chemists
Societies and has been taken over as EN ISO 17074:2011 by Technical Committee CEN/TC 289 “Leather”
the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at
the latest by March 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14326:2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 17074:2006 has been approved by CEN as a EN ISO 17074:2011 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 17074:2011

--------------
...