CEN/TR 15123:2005

Design, preparation and application of internal polymer plastering systems

This document concerns the design, preparation and application of plaster with polymer as the principal binder type, for internal plastering on all types of background used under normal conditions. It includes plastering onto both new and old backgrounds and the maintenance and repair of existing work. It concerns materials, backgrounds, preparation of the surface to be plastered, choice of suitable polymer plasters, methods of application and inspection and testing of plastering.
Because of the many and varied materials and practices in Europe it is not possible for certain aspects of the standard to enter into sufficient detail to be fully usable to practitioners in each country.

Planung, Zubereitung und Ausführung von Polymer-Innenputzsystemen

Načrtovanje, priprava in uporaba notranjih polimernih ometov

General Information

• Status: Withdrawn
• Publication Date: 14-Jun-2005
• Withdrawal Date: 18-Sep-2023
• ICS: 83.140.99 - Other rubber and plastics products
• ICS: 91.180 - Interior finishing
• Technical Committee: CEN/TC 125 - Masonry
• Drafting Committee: CEN/TC 125/WG 5 - Application of external rendering in masonry
• Ref Project: SIST-TP CEN/TR 15123:2005 - Design, preparation and application of internal polymer plastering systems

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 15123:2005
01-september-2005
1DþUWRYDQMHSULSUDYDLQXSRUDEDQRWUDQMLKSROLPHUQLKRPHWRY
Design, preparation and application of internal polymer plastering systems
Planung, Zubereitung und Ausführung von Polymer-Innenputzsystemen
Ta slovenski standard je istoveten z: CEN/TR 15123:2005
ICS:
83.140.99 Drugi izdelki iz gume in Other rubber and plastics
polimernih materialov products
91.180 1RWUDQMD]DNOMXþQDGHOD Interior finishing
SIST-TP CEN/TR 15123:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 15123:2005

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 15123:2005
TECHNICAL REPORT
CEN/TR 15123
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
June 2005
ICS 83.140.99; 91.180
English version
Design, preparation and application of internal polymer
plastering systems
Planung, Zubereitung und Ausführung von
Kunstharzinnenputzsystemen
This Technical Report was approved by CEN on 13 May 2005. It has been drawn up by the Technical Committee CEN/TC 125.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 15123:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 15123:2005
CEN/TR 15123:2005 (E)
Contents
Page
Foreword. 3
1 Scope. 4
2 Terms and definitions . 4
3 Materials and accessories . 4
4 Design - factors influencing the selection of polymer plastering systems. 5

5 Characteristics of polymer plasters. 6
6 Types and standards of plaster finish . 11
7 Application. 11
Bibliography . 13

2

---------------------- Page: 4 ----------------------

SIST-TP CEN/TR 15123:2005
CEN/TR 15123:2005 (E)
Foreword
This document (CEN/TR 15123:2005) has been prepared by Technical Committee CEN/TC 125
"Masonry", the secretariat of which is held by BSI.
This document has been initially prepared by the European section of International Union of
Contractors of Plastering, Dry Lining, Stucco and Related Activities (UIEP) at the request of the
CEN Technical Sector Board (Resolution No.BTS1/56/1991). It has been revised by CEN/TC
125/JWG5 in conjunction with CEN/TC 241. The CEN technical report gives in different sections
guidance for building details, design and materials considerations and the application of polymer
plasters. Relevant data are summarized in a series of tables. The recommendations are framed in
logical sequence, namely materials and accessories; properties of backgrounds that influence the
choice of suitable polymer plastering systems; guidance on preparation of surfaces to be plastered;
choice of suitable polymer plasters; methods of application. It is essential that the design clauses are
read in conjunction with the clauses on background and preparation.
It is not the function of this document to assign responsibility for the design and application of any
work or actions mentioned within to any specific party. Such responsibility is a matter for other
documentation associated with the work, e.g. the contract.
It has been assumed in the drafting of this document that the application of its provisions is entrusted
to appropriately qualified and experienced people, for whose guidance it has been prepared.
This TR should be read in conjunction with EN 13914-2.
The following similar Technical Reports a
...