EN ISO 14122-1:2001/A1:2010

Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels - Amendment 1 (ISO 14122-1:2001/Amd 1:2010)

Applies to all machinery (stationary and mobile) where fixed means of access are necessary. May also apply to means of access to that part of the building where the machine is installed, providing the main function of that part of the building is to provide a means of access to the machine. Applies also to access means specific to the machine which are not permanently fixed to the machine and which may be removed or moved to the side for some operations of the machine.

Sicherheit von Maschinen - Ortsfeste Zugänge zu maschinellen Anlagen - Teil 1: Wahl eines ortsfesten Zugangs zwischen zwei Ebenen - Änderung 1 (ISO 14122-1:2001/Amd 1:2010)

Sécurité des machines - Moyens d'accès permanents aux machines - Partie 1: Choix d'un moyen d'accès fixe entre deux niveaux - Amendement 1 (ISO 14122-1:2001/Amd 1:2010)

Varnost strojev - Stalni dostopi do strojev in postrojenj - 1. del: Izbira fiksnega dostopa med dvema nivojema - Dopolnilo A1 (ISO 14122-1:2001/Amd 1:2010)

Velja za stroje (stacionarne in mobilne), kadar so potrebni fiksni načini dostopa. Prav tako lahko velja za način dostopa do tega dela zgradbe, kjer je stroj postavljen, če je glavna funkcija tega dela zgradbe zagotoviti način dostopa da stroja. Prav tako velja za načine dostopa do stroja, ki niso stalno pritrjene do stroja in katere je lahko odstraniti ali premakniti na stran na nekatera delovanja stroja.

General Information

• Status: Withdrawn
• Publication Date: 14-Apr-2010
• Withdrawal Date: 21-Jun-2016
• ICS: 13.110 - Safety of machinery
• Technical Committee: CEN/TC 114 - Safety of machinery
• Drafting Committee: CEN/TC 114 - Safety of machinery
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 22-Jun-2016
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN ISO 14122-1:2002/A1:2010 - Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels - Amendment 1 (ISO 14122-1:2001/Amd 1:2010)

Relations

• Replaced By: EN ISO 14122-1:2016 - Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
• Effective Date: 29-Jun-2016
• Amends: EN ISO 14122-1:2001 - Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14122-1:2002/A1:2010
01-december-2010
Varnost strojev - Stalni dostopi do strojev in postrojenj - 1. del: Izbira fiksnega
dostopa med dvema nivojema - Dopolnilo A1 (ISO 14122-1:2001/Amd 1:2010)
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed
means of access between two levels - Amendment 1 (ISO 14122-1:2001/Amd 1:2010)
Sicherheit von Maschinen - Ortsfeste Zugänge zu maschinellen Anlagen - Teil 1: Wahl
eines ortsfesten Zugangs zwischen zwei Ebenen ((ISO 14122-1:2001/Amd 1:2010)
Sécurité des machines - Moyens d'accès permanents aux machines - Partie 1: Choix
d'un moyen d'accès fixe entre deux niveaux - Amendement 1 (ISO 14122-1:2001/Amd
1:2010)
Ta slovenski standard je istoveten z: EN ISO 14122-1:2001/A1:2010
ICS:
13.110 Varnost strojev Safety of machinery
SIST EN ISO 14122-1:2002/A1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14122-1:2002/A1:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 14122-1:2002/A1:2010


EUROPEAN STANDARD
EN ISO 14122-1:2001/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2010
ICS 13.110
English Version
Safety of machinery - Permanent means of access to machinery
- Part 1: Choice of fixed means of access between two levels -
Amendment 1 (ISO 14122-1:2001/Amd 1:2010)
Sécurité des machines - Moyens d'accès permanents aux Sicherheit von Maschinen - Ortsfeste Zugänge zu
machines - Partie 1: Choix d'un moyen d'accès fixe entre maschinellen Anlagen - Teil 1: Wahl eines ortsfesten
deux niveaux - Amendement 1 (ISO 14122-1:2001/Amd Zugangs zwischen zwei Ebenen - Änderung 1 (ISO 14122-
1:2010) 1:2001/Amd 1:2010)
This amendment A1 modifies the European Standard EN ISO 14122-1:2001; it was approved by CEN on 14 April 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14122-1:2001/A1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14122-1:2002/A1:2010
EN ISO 14122-1:2001/A1:2010 (E)
Contents Page
Foreword .3
Annex ZA (informative)  Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC .4
Annex ZB (informative)  Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .5

2

---------------------- Page: 4 ----------------------

SIST EN ISO 14122-1:2002/A1:2010
EN ISO 14122-1:2001/A1:2010 (E)
Foreword
This document (EN ISO 14122-1:2001/A1:2010) has been prepared by Technical Committee ISO/TC 199
"Safety of machinery" in collaboration with Technical Committee CEN/TC 114 “Safety of machinery” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at
the latest by October 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade
...