EN 12369-3:2008

Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels

This European Standard provides information on the characteristic values for use in designing structures incorporating wood-based panels. The characteristic values given are as defined in EN 1995-1-1.
This European Standard includes the characteristic values of the mechanical properties and of the raw density for solid-wood panels complying with EN 13353:2008 technical classes SWP/1 S, SWP/2 S, SWP/3 S.

Holzwerkstoffe - Charakteristische Werte für die Berechnung und Bemessung von Holzbauwerken - Teil 3: Massivholzplatten

Diese Europäische Norm gibt Informationen über charakteristische Werte für die Berechnung und Bemessung
von Bauwerken, in denen Holzwerkstoffe eingesetzt werden. Die angegebenen charakteristischen Werte
entsprechen den Definitionen in EN 1995-1-1.
Diese Norm enthält die charakteristischen Werte der mechanischen Eigenschaften und der Rohdichte von
Massivholzplatten der technischen Klassen SWP/1S, SWP/2S und SWP/3S nach EN 13353:2008.

Panneaux à base de bois - Valeurs caractéristiques pour la conception des structures - Partie 3: Bois panneautés

La présente Norme Européenne donne des informations sur les valeurs caractéristiques à utiliser dans la
conception des structures incorporant des panneaux à base de bois. Les valeurs caractéristiques données
sont telles que définies dans l’EN 1995-1-1.
La présente norme contient les valeurs caractéristiques des propriétés mécaniques et de la masse volumique
des bois panneautés répondant à l’EN 13353 :2008, classes techniques SWP/1 S, SWP/2 S, SWP/3 S.

Lesne plošče - Karakteristične vrednosti za dimenzioniranje konstrukcij - 3. del: Masivne lesne plošče

General Information

• Status: Withdrawn
• Publication Date: 11-Nov-2008
• Withdrawal Date: 19-Jul-2022
• ICS: 79.060.99 - Other wood-based panels
• Technical Committee: CEN/TC 112 - Woodbased panels
• Drafting Committee: CEN/TC 112/WG 4 - Test methods
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 20-Jul-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 12369-3:2009 - Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels

Relations

• Replaced By: EN 12369-3:2022 - Wood-based panels - Characteristic values for structural design - Part 3: Solid wood panels
• Effective Date: 27-Jul-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzwerkstoffe - Charakteristische Werte für die Berechnung und Bemessung von Holzbauwerken - Teil 3: MassivholzplattenPanneaux a base de bois - Valeurs caractéristiques pour la conception des structures - Partie 3: Bois panneautésWood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels79.060.99Other wood-based panelsICS:Ta slovenski standard je istoveten z:EN 12369-3:2008SIST EN 12369-3:2009en,fr,de01-april-2009SIST EN 12369-3:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12369-3November 2008ICS 79.060.99 English VersionWood-based panels - Characteristic values for structural design- Part 3: Solid-wood panelsPanneaux à base de bois - Valeurs caractéristiques pourconception des structures - Partie 3: Bois panneautésHolzwerkstoffe - Charakteristische Werte für dieBerechnung und Bemessung von Holzbauwerken - Teil 3:MassivholzplattenThis European Standard was approved by CEN on 12 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12369-3:2008: ESIST EN 12369-3:2009

Presentation of characteristic values.9 Bibliography.10
3.1.1.1 characteristic strength value population 5-percentile value obtained from the results of tests with a duration of 300 s at an equilibrium moisture content of the test pieces relating to a temperature of 20 °C and a relative humidity of 65 % 3.1.1.2 characteristic stiffness value either the population 5-percentile or the mean value obtained of tests with a duration of 300 s at an equilibrium moisture content of the test pieces relating to a temperature of 20 °C and a relative humidity of 65 % NOTE The stiffness values given in the Tables are mean values as these are most commonly used in design. A note in Annex A explains how to calculate the 5-percentile value. 3.1.1.3 characteristic density population 5-percentile val
...