iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13848-2:2020

(Main)

Railway applications - Track - Track geometry quality - Part 2: Measuring systems - Track recording vehicles

Railway applications - Track - Track geometry quality - Part 2: Measuring systems - Track recording vehicles

This document specifies the minimum requirements for track geometry measuring principles and track geometry measuring systems in order to produce comparable results when measuring the same track. It applies to all measuring systems, attended or unattended, fitted on any vehicle, except those systems defined in EN 13848 3 and EN 13848 4. Only systems put into service after the standard comes into force are concerned.
This document does not define the requirements for vehicle acceptance.
This document does not apply to measuring systems dedicated to Urban Rail Systems.

Bahnanwendungen - Oberbau - Gleislagequalität - Teil 2: Messsysteme - Gleismessfahrzeuge

Dieses Dokument beschreibt die minimalen Anforderungen an Messprinzipien und Systeme für die Gleisgeometrie, um vergleichbare Ergebnisse bei Messung desselben Gleises zu erzielen. Das Dokument betrifft alle Messsysteme mit oder ohne Bediener, die an Fahrzeugen angebracht sind, mit Ausnahme der in EN 13848 3 und EN 13848 4 festgelegten Systeme. Nur nach dem Inkrafttreten der Norm in Betrieb genommene Geräte sind hiervon betroffen.
Diese Europäische Norm definiert nicht die Abnahmebedingungen für Fahrzeuge.
Dieses Dokument gilt nicht für Messeinrichtungen für städtische Schienenbahnen.

Applications ferroviaires - Voie - Qualité géométrique de la voie - Partie 2 : Systèmes de mesure - Véhicules d'enregistrement de la voie

Le présent document spécifie les exigences minimales pour les principes de mesure de la géométrie de la voie et pour les systèmes de mesure de la géométrie de la voie dans le but de produire des résultats comparables lors de mesures sur une même voie. Il s'applique à l'ensemble des systèmes de mesure (surveillés ou non) équipant les véhicules, à l'exception des systèmes définis dans les normes EN 13848 3 et EN 13848 4. Seuls les systèmes mis en service après la mise en application de la norme sont concernés.
Le présent document n'entend pas non plus définir les exigences relatives à l'acceptation du véhicule.
Le présent document ne s'applique pas aux systèmes de mesure dédiés aux systèmes ferroviaires urbains.

Železniške naprave - Zgornji ustroj proge - Kakovost tirne geometrije - 2. del: Merilni sistemi - Merilna vozila

General Information

Status
Published
Publication Date
17-Nov-2020
Withdrawal Date
30-May-2021
ICS
93.100 - Construction of railways
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/SC 1/WG 28 - Track geometry quality
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
18-Nov-2020
Due Date
12-Jan-2021
Completion Date
18-Nov-2020
Directive
2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
Ref Project
SIST EN 13848-2:2021 - Railway applications - Track - Track geometry quality - Part 2: Measuring systems - Track recording vehicles

Relations

Replaces
EN 13848-2:2006 - Railway applications - Track - Track geometry quality - Part 2: Measuring systems - Track recording vehicles
Effective Date
25-Nov-2020

Buy Standard

EN 13848-2:2021EN 13848-2:2021
PreviousNext
Standard
EN 13848-2:2021
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13848-2:2021
01-januar-2021
Nadomešča:
SIST EN 13848-2:2006
Železniške naprave - Zgornji ustroj proge - Kakovost tirne geometrije - 2. del:
Merilni sistemi - Merilna vozila
Railway applications - Track - Track geometry quality - Part 2: Measuring systems -
Track recording vehicles
Bahnanwendungen - Oberbau - Geometrische Gleislagegüte - Teil 2: Messsysteme -
Gleismessfahrzeuge
Applications ferroviaires - Voie - Qualité géométrique de la voie - Partie 2 : Systèmes de
mesure - Véhicules d'enregistrement de la voie
Ta slovenski standard je istoveten z: EN 13848-2:2020
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
93.100 Gradnja železnic Construction of railways
SIST EN 13848-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13848-2:2021

---------------------- Page: 2 ----------------------
SIST EN 13848-2:2021


EN 13848-2
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2020
EUROPÄISCHE NORM
ICS 93.100 Supersedes EN 13848-2:2006
English Version

Railway applications - Track - Track geometry quality -
Part 2: Measuring systems - Track recording vehicles
Applications ferroviaires - Voie - Qualité géométrique Bahnanwendungen - Oberbau - Geometrische
de la voie - Partie 2 : Systèmes de mesure - Véhicules Gleislagegüte - Teil 2: Messsysteme -
d'enregistrement de la voie Gleismessfahrzeuge
This European Standard was approved by CEN on 5 July 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13848-2:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13848-2:2021
EN 13848-2:2020 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviations . 8
5 Track geometry recording system . 8
5.1 General description . 8
5.2 Environmental conditions . 9
5.3 Track features input . 10
5.4 Localization device . 11
5.5 Measuring devices . 11
5.6 Resolution .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16843:2024(Main)
Railway applications - Infrastructure - Mechanical requirements for joints in running rails
SIST EN 16843:2024

This European Standard deals with mechanical rail joints for flat bottom rails 46 kg/m and over. The scope of this standard is: to
establish requirements for insulated and non-insulated rail joints, for stressed rail (continuous welded rail, CWR) and unstressed rail (jointed track); to define mechanical and electrical requirements for type approval and for acceptance of insulated rail joints which are manufactured in a factory (prefab construction) as well as assembled onsite (site construction). This standard specifies the minimum requirements. Special applications as for instance tram systems may require different demands in certain paragraphs and should be agreed between customer and supplier. The scope also excludes expansion joints (it is covered in EN 13232-8), and special joints in switch constructions.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16272-6:2023(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - Airborne sound insulation under direct sound field conditions
SIST EN 16272-6:2024

This document describes a test method for measuring a quantity representative of the intrinsic characteristics of airborne sound insulation for rail noise barriers and related devices: the sound insulation index.
The test method is intended for the following applications:
-   determination of the intrinsic characteristics of airborne sound insulation of noise barriers and related devices to be installed along railways, to be measured either on typical installations alongside railways or in laboratory conditions;
-   determination of the intrinsic characteristics of airborne sound insulation of noise barriers and related devices in actual use;
-   comparison of design specifications with actual performance data after the completion of the construction work;
-   verification of the long-term performance of noise barriers and related devices (with a repeated application of the method);
-   interactive design process of new products, including the formulation of installation manuals.
The test method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise barriers and related devices to be installed in reverberant conditions, e.g. inside tunnels or deep trenches or under covers.
Results are expressed as a function of frequency in one-third octave bands, where possible, between 100 Hz and 5 kHz. If it is not possible to get valid measurement results over the whole frequency range indicated, the results need to be given in a restricted frequency range and the reasons for the restriction(s) need to be clearly reported.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16272-2:2023(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics - Airborne sound insulation under diffuse sound field conditions
SIST EN 16272-2:2024

This document specifies the laboratory method for measuring the airborne sound insulation performance of railway noise barriers in reverberant conditions. It covers the assessment of the intrinsic performance of noise barriers and related devices acting on airborne sound propagation that can reasonably be assembled inside the testing facility described in EN ISO 10140 2 and EN ISO 10140 4.
This method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise barriers to be installed on railway in non-reverberant conditions.
All noise reducing devices different from noise barriers and related devices acting on airborne sound propagation, e.g. devices for attenuation of ground borne vibration and on board devices, are out of the scope of this document.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16272-1:2023(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics - Sound absorption under diffuse sound field conditions
SIST EN 16272-1:2024

This European Standard specifies the laboratory method for measuring the sound absorption performance of railway noise barriers and related devices acting on airborne sound propagation in reverberant conditions. It covers the assessment of the intrinsic sound absorption performance of devices that can reasonably be assembled inside the testing facility described in EN ISO 354.
This method is not intended for the determination of the intrinsic characteristics of sound absorption of noise barriers and related devices acting on airborne sound propagation to be installed on railways in non-reverberant conditions.
The test method in EN ISO 354 referred to in this European Standard excludes devices that act as weakly damped resonators. Some devices will depart significantly from these requirements and in these cases, care is needed in interpreting the results.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16272-5:2023(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - Sound absorption under direct sound field conditions
SIST EN 16272-5:2024

This document describes a test method for measuring a quantity representative of the intrinsic characteristics of sound absorption from railway noise barriers and related devices acting on airborne sound propagation, the sound reflection index RI, and then calculate a single-number rating for sound absorption from it.
The test method is intended for the following applications:
-   determination of the intrinsic characteristics of sound absorption of noise barriers and related devices acting on airborne sound propagation to be installed along railways, to be measured either on typical installations alongside railways or on a relevant sample section;
-   determination of the intrinsic characteristics of sound absorption of noise barriers and related devices acting on airborne sound propagation in actual use under direct sound field conditions;
-   comparison of design specifications with actual performance data after the completion of the construction work;
-   verification of the long-term performance of noise barriers and related devices acting on airborne sound propagation (with a repeated application of the method).
The test method is not intended for the following applications:
-   determination of the intrinsic characteristics of sound absorption of noise barriers and related devices acting on airborne sound propagation to be installed in reverberant conditions, e.g. inside tunnels or deep trenches.
Results for the sound reflection index are expressed as a function of frequency, in one-third octave bands, where possible, between 100 Hz and 5 kHz. If it is not possible to get valid measurements results over the whole frequency range indicated, the results are given in a restricted frequency range and the reasons of the restriction(s) are clearly reported.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13231-1:2023(Main)
Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line, switches and crossings
SIST EN 13231-1:2024

This document specifies technical requirements and tolerances for the acceptance of works on ballasted track situated on:
-   plain line;
-   switches and crossings; and
-   rail expansion devices as part of the track
for 1 435 mm and wider track gauge railways.
The works on ballasted track, hereafter referred to as track works, concern construction of new track, track renewal and track maintenance.
This document specifies the requirements for substructure works, track geometry, absolute track position, working parameters of on track machines, track components, ballast cross section, structure gauge, stressing works, specific measurements and quality checks for switches and crossings and rail expansion devices, and for the measuring systems used to perform measurements, verifications and checks for the scope of acceptance. Requirements for responsibilities and documentation necessary for the acceptance of track works are specified.
This document also requires compliance of all track materials with the customer’s relevant acceptance criteria and specifications provided by the supplier.
This document does not cover works related to reprofiling the railhead or the associated measurements, except for some measurements related to safety, as these works are covered by other parts of EN 13231 series.
Platform reconstruction works and level crossing works are not covered by this document.
This document does not apply to urban rail systems or ballastless track.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16272-3-1:2023(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-1: Normalized railway noise spectrum and single number ratings for diffuse sound field applications
SIST EN 16272-3-1:2023

This document specifies a normalized railway noise spectrum for the evaluation and assessment of the acoustic performance of devices designed to reduce airborne railway noise near railways.
All noise reducing devices different from noise barriers and related devices acting on airborne sound propagation, e.g. devices for attenuation of ground borne vibration and on board devices are outside of the scope of this document.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16272-3-2:2023(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum and single number ratings for direct sound field applications
SIST EN 16272-3-2:2023

This document specifies a normalized railway noise spectrum for the evaluation and assessment of the acoustic performance of devices designed to reduce airborne railway noise near railways.
All noise reducing devices different from noise barriers and related devices acting on airborne sound propagation, e.g. devices for attenuation of ground borne vibration and on board devices are outside of the scope of this document.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13232-3:2023(Main)
Railway applications - Track - Switches and crossings for Vignole rails - Part 3: Requirements for wheel/rail interaction
SIST EN 13232-3:2023

This document defines the main wheel/track interaction criteria to be taken into account during the geometrical design of railway switches and crossings (S&C) layouts.
It specifies:
—   characterization of wheel and track dimensions;
—   geometric design principles for wheel guidance;
—   design principles for wheel load transfer;
—   whether movable crossings are needed.
These are illustrated by their application to turnout components:
—   switches;
—   crossings;
—   check rails,
but the principles apply equally to more complex units. There are also simplified definitions of the safety and functional dimensions, which can be used in conjunction with the general principles as the basis for more in-depth assessment.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13232-4:2023(Main)
Railway applications - Track - Switches and crossings for Vignole rails - Part 4: Actuation, locking and detection
SIST EN 13232-4:2023

This document determines the interface between moveable parts and the actuation, locking and detection equipment, and defines the basic criteria for switches and crossing with moveable parts in respect of the interface.
It concerns:
—   rules, parameters and tolerances for alternative positions of the moveable parts;
—   criteria and limits for the forces which move and restrain the moveable parts.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day