prEN 480-10
(Main)Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content
Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content
Revision of EN 480-10:1996
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Prüfverfahren - Teil 10: Bestimmung des wasserlöslichen Chloridgehaltes, Deutsche Fassung prEN 480-10:2005
Dieser Europäische Norm-Entwurf beschreibt Verfahren zur Bestimmung von wasserlöslichen Halogenen (mit
Ausnahme von Fluor) in Zusatzmitteln.
Der Gesamtgehalt an wasserlöslichen Halogenen wird als der Chloridgehalt bezeichnet.
Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 10 : Détermination de la teneur en chlore soluble dans l'eau
Le présent projet de Norme européenne décrit des méthodes de détermination de la teneur des adjuvants en halogénures solubles dans l'eau (à l'exception des fluorures).
La teneur totale en halogénures solubles dans l'eau s'exprime comme la teneur en chlorure.
Kemijski dodatki za beton, malto in injekcijsko maso - Metode preskušanja - 10. del: Določanje deleža vodotopnih kloridov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
PSIST prEN 480-10:1995
01-december-1995
'RGDWNL]DEHWRQLQPDOWR0HWRGHSUHVNXãDQMDGHO 'RORþDQMHYVHEQRVWL
NORULGRY
Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of the
chloride content
Ta slovenski standard je istoveten z: prEN 480-10:1991
ICS:
91.10
...
SLOVENSKI oSIST prEN 480-10:2005
PREDSTANDARD
april 2005
Kemijski dodatki za beton, malto in injekcijsko maso - Metode preskušanja -
10. del: Določanje deleža vodotopnih kloridov
Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination
of water soluble chloride content
ICS 91.100.10; 91.100.30 Referenčna številka
oSIST prEN 480-10:2005(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN 480-10
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2005
ICS Will supersede EN 480-10:1996
English version
Admixtures for concrete, mortar and grout - Test methods - Part
10: Determination of water soluble chloride content
Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Zusatzmittel für Beton, Mörtel und Einpressmörtel -
Partie 10 : Détermination de la teneur en chlorure soluble Prüfverfahren - Teil 10: Bestimmung des wasserlöslichen
dans l'eau Chloridgehaltes
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 104.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 480-10:2005: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
prEN 480-10:2005 (E)
Contents Page
Foreword.3
1 Scope.4
2 Principle.4
3 Apparatus.4
3.1 pH meter.4
3.2 Electrodes.4
3.3 Additional apparatus.4
3.4 Reagents.5
4 Procedure.5
4.1 Preparation of sample .5
4.1.1 Liquid admixture.5
4.1.2 Powder admixture.5
4.2 Determination.5
4.2.1 General.5
4.2.2 Method 1.5
4.2.3 Method 2.6
4.2.4 Method 3.6
5 Results.6
6 Test report.7
2
---------------------- Page: 3 ----------------------
prEN 480-10:2005 (E)
Foreword
This document (prEN 480-10:2005) has been prepared by Technical Committee CEN/TC 104 “Concrete and
related products”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 480-10:1996.
It has been drafted by Subcommittee 3 (SC 3) of TC 104 "Admixtures for concrete, mortar and grout".
This draft European Standard is part of the series EN 480 "Admixtures for concrete, mortar and grout – Test
methods" which comprises the following
Part 1 Reference concrete and reference mortar for testing
Part 2 Determination of setting time
Part 4 Determination of bleeding of concrete
Part 5 Determination of capillary absorption
Part 6 Infrared analysis
Part 8 Determination of the conventional dry material content
Part 10 Determination of water soluble chloride content
Part 11 Determination of air void characteristics in harde
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.