EN 12794:2005+A1:2007

Precast concrete products - Foundation piles

This document specifies the terminology, requirements, basic performance criteria, test methods and evaluation of conformity that will be applied to precast concrete foundation piles, factory produced for building and civil engineering works and installed at the site by the use of impact, vibration, pressing or other suitable techniques. This document may also be applied to products manufactured in temporary plants on site where production is controlled in accordance with the provisions of Clause 6 and is protected against adverse weather conditions as necessary.
This document applies to foundation piles produced in a plant as reinforced or prestressed concrete elements. The cross-section may be solid or provided with a hollow core, either prismatic or cylindrical. The cross-section may be constant over the full length or tapered partly or wholly along the pile or pile segment length.
This document deals with foundation piles manufactured either in one length or in segments with cast-in pile joints. The foundation piles may have an enlarged toe or a pile shoe.
This document applies to normal weight concrete as defined in EN 206-1 compacted so as to retain no appreciable amount of entrapped air other than entrained air.

Betonfertigteile - Gründungspfähle

Dieses Dokument legt die Terminologie, die Anforderungen, grundlegenden Leistungskriterien, Prüfverfahren und die Konformitätsbewertung für vorgefertigte Gründungspfähle aus Beton fest, die werkmäßig für Bau- oder Tiefbauzwecke hergestellt und auf der Baustelle durch Rammen, Rütteln, Druck oder sonstige Verfahren aufgestellt werden. Dieses Dokument darf auch auf Produkte abgewendet werden, die in zeitweise auf der Baustelle errichteten Anlagen hergestellt werden, falls die Herstellung nach den Vorschriften von Abschnitt 6 überwacht wird und erforderlichenfalls in angemessener Weise gegen Witterungseinflüsse geschützt erfolgt.
Dieses Dokument gilt für Gründungspfähle, die in einer Anlage als Stahl- oder Spannbetonbauteile hergestellt werden. Sie können massiv sein oder einen Hohlkern haben und prismatisch oder zylindrisch geformt sein. Sie können über die gesamte Länge den gleichen Querschnitt haben oder sich über die gesamte Pfahl- oder Segmentlänge oder einen Teil davon verjüngen.
Dieses Dokument behandelt Gründungspfähle, die entweder am Stück oder in Segmenten mit einbetonierten Pfahlverbindungen hergestellt werden. Die Gründungspfähle können eine Fußverbreiterung oder einen Pfahlschuh haben.
Dieses Dokument gilt für Normalbeton nach EN 206 1, der so weit verdichtet ist, dass er neben den Luftporen keine nennenswerten Mengen an eingeschlossener Luft enthält.

Produits préfabriqués en béton - Pieux de fondation

Montažni betonski izdelki - Piloti za temeljenje

General Information

• Status: Published
• Publication Date: 08-May-2007
• ICS: 91.100.30 - Concrete and concrete products
• ICS: 93.020 - Earthworks. Excavations. Foundation construction. Underground works
• Technical Committee: CEN/TC 229 - Precast concrete products
• Drafting Committee: CEN/TC 229/WG 1 - Products for which the stability requirements is predominant
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 09-Jun-2009
• Completion Date: 09-Jun-2009
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/100 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on precast concrete products
• Ref Project: SIST EN 12794:2005+A1:2007 - Precast concrete products - Foundation piles

Relations

• Merged From: EN 12794:2005 - Precast concrete products - Foundation piles
• Effective Date: 19-Jan-2023
• Corrected By: EN 12794:2005+A1:2007/AC:2008 - Precast concrete products - Foundation piles
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Precast concrete products - Foundation pilesMontažni betonski izdelki - Piloti za temeljenjeProduits préfabriqués en béton - Pieux de fondationBetonfertigteile - GründungspfähleTa slovenski standard je istoveten z:EN 12794:2005+A1:2007SIST EN 12794:2005+A1:2007en;fr93.020Zemeljska dela. Izkopavanja. Gradnja temeljev. Dela pod zemljoEarthworks. Excavations. Foundation construction. Underground works91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:SLOVENSKI
STANDARDSIST EN 12794:2005+A1:200701-julij-2007

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12794:2005+A1
May 2007 ICS 91.100.30; 93.020 SupersedesEN 12794:2005English Version
Precast concrete products - Foundation piles
Produits préfabriqués en béton - Pieux de fondation
Betonfertigteile - Gründungspfähle This European Standard was approved by CEN on 22 November 2004 and includes Amendment 1 approved by CEN on 6 April 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12794:2005+A1:2007: E

Type test method for the verification of robustness and rigidity of pile joints.18 Annex B (normative)
Design aspects in reference with EN 1992-1-1.22 Annex C (normative)
Provisions for the design and manufacture of piles reinforced with a single bar in reference with this document and EN 1992-1-1.26 Annex D (informative)
Provisions for the design and installation of piles and pile segments reinforced with a single bar.28 Annex E (normative)
Method to measure perpendicularity of the pile top, pile bottom or pile joint against pile axis.29 Annex Y (Informative)
Choice of CE marking method.43 Bibliography.44

Key 1 Pile top 2 Pile length 3 Shaft length 4 Pile segment 5 Segment length 6 Pile joint 7 Pile shoe 8 Pile toe 9 Pile bottom Figure 1 — Terms and definitions

4.2.3.2.3 of EN 13369:2004 shall apply. 4.2.3.2.4 Slippage of tendons Not relevant due to the common production technique.
...