EN ISO 7263:2008

Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2008)

ISO 7263:2008 specifies two methods for the determination of the flat crush resistance of corrugating medium after laboratory fluting.
The procedures are applicable to any corrugating medium intended to be used, after fluting, in the manufacture of corrugated board.

Wellenrohpapier - Bestimmung des Flachstauchwiderstandes an labormäßig gewelltem Wellenpapier (ISO 7263:2008)

Diese Internationale Norm legt zwei Prüfverfahren für die Bestimmung des Flachstauchwiderstandes von labormäßig gewelltem Wellenpapier fest.
Diese Verfahren sind für jedes Wellenpapier anwendbar, das für die Herstellung von Wellpappe eingesetzt wird.

Papier cannelure pour carton ondulé - Détermination de la résistance à la compression à plat après cannelage en laboratoire (ISO 7263:2008)

L'ISO 7263:2008 sp�cifie deux m�thodes pour la d�termination de la r�sistance � la compression � plat du papier cannelure pour carton ondul� apr�s cannelage en laboratoire.
Les modes op�ratoires sont applicables � tout papier destin� � �tre utilis�, apr�s cannelage, pour la fabrication de carton ondul�.

Ovalovljeni papir - Določanje ploskovne odpornosti po laboratorijskem ovalovljenju (ISO 7263:2008)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2008
• Withdrawal Date: 14-Feb-2011
• ICS: 85.080.30 - Cardboard
• Technical Committee: CEN/TC 172 - Pulp, paper and board
• Drafting Committee: CEN/TC 172 - Pulp, paper and board
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Feb-2011
• Completion Date: 15-Feb-2011
• Ref Project: SIST EN ISO 7263:2009 - Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2008)

Relations

• Replaces: EN ISO 7263:1995 - Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:1994)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 7263:2011 - Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7263:2009
01-maj-2009
1DGRPHãþD
SIST EN ISO 7263:1996
2YDORYOMHQLSDSLU'RORþDQMHSORVNRYQHRGSRUQRVWLSRODERUDWRULMVNHP
RYDORYOMHQMX,62
Corrugating medium - Determination of the flat crush resistance after laboratory fluting
(ISO 7263:2008)
Wellenrohpapier - Bestimmung des Flachstauchwiderstandes an labormäßig gewellter
Wellpappe (ISO 7263:2008)
Papier cannelure pour carton ondulé - Détermination de la résistance a la compression a
plat apres cannelage en laboratoire (ISO 7263:2008)
Ta slovenski standard je istoveten z: EN ISO 7263:2008
ICS:
85.060 Papir, karton in lepenka Paper and board
SIST EN ISO 7263:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7263:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 7263:2009
EUROPEAN STANDARD
EN ISO 7263
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2008
ICS 85.080.30 Supersedes EN ISO 7263:1995
English Version
Corrugating medium - Determination of the flat crush resistance
after laboratory fluting (ISO 7263:2008)
Papier cannelure pour carton ondulé - Détermination de la Wellenrohpapier - Bestimmung des
résistance à la compression à plat après cannelage en Flachstauchwiderstandes an labormäßig gewelltem
laboratoire (ISO 7263:2008) Wellenpapier (ISO 7263:2008)
This European Standard was approved by CEN on 5 December 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7263:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 7263:2009
EN ISO 7263:2008 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 7263:2009
EN ISO 7263:2008 (E)
Foreword
This document (EN ISO 7263:2008) has been prepared by Technical Committee ISO/TC 6 "Paper, board and
pulps" in collaboration with Technical Committee CEN/TC 172 "Pulp, paper and board", the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2009, and conflicting national standards shall be withdrawn at
the latest by June 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7263:1995.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 7263:2008 has been approved by CEN as a EN ISO 7263:2008 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 7263:2009

---------------------- Page: 6 ----------------------

SIST EN ISO 7263:2009

INTERNATIONAL ISO
STANDARD 7263
Third edition
2008-12-15

Corrugating medium — Determination of
the flat crush resistance after laboratory
fluting
Papier cannelure pour carton ondulé — Détermination de la résistance
à la compression à plat après cannelage en laboratoire




Reference num
...