EN ISO 13503-3:2005

Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines (ISO 13503-3:2005)

ISO 13503-3:2005 covers the physical properties, potential contaminants and test procedures for heavy brine fluids manufactured for use in oil and gas well drilling, completion and workover fluids.
ISO 13503-3:2005 provides methods for assessing the performance and physical characteristics of heavy brines for use in field operations. It includes procedures for evaluating the density or specific gravity, the clarity or amount of particulate matter carried in the brine, the crystallization point or the temperature (both ambient and under pressure) at which the brines make the transition between liquid and solid, the pH, and iron contamination.
It also contains a discussion of gas hydrate formation and mitigation, brine viscosity, corrosion testing, buffering capacity and a standardised reporting form.
ISO 13503-3:2005 is intended for the use of manufacturers, service companies and end-users of heavy brines.

Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten und -materialien - Teil 3: Prüfung von schweren Solen (ISO 13503-3:2005)

Industries du pétrole et du gaz naturel - Fluides et matériaux de complétion - Partie 3: Essais de saumures denses (ISO 13503-3:2005)

L'ISO 13503-3:2005 traite des propriétés physiques, des contaminants potentiels ainsi que des procédures d'essais pour les saumures denses préparées pour utilisation dans les fluides de forage, de complétion ou de reprise des puits de pétrole et de gaz.
L'ISO 13503-3:2005 fournit des méthodes pour évaluer les performances et les propriétés physiques des saumures denses employées dans les opérations de chantier. Elle comprend des modes opératoires d'évaluation de la masse spécifique ou de la densité, de la clarté ou de la quantité de particules transportées dans la saumure, du point de cristallisation ou de la température (ambiante et sous pression) à laquelle les saumures passent du stade liquide au stade solide, du pH, et de la contamination ferrugineuse.
Elle contient aussi une discussion de la formation des hydrates de gaz et de leur atténuation, de la viscosité des saumures, des essais de corrosion,  du pouvoir tampon, ainsi qu'un formulaire de rapport standard.
L'ISO 13503-3:2005 est destinée à l'usage des fabricants, des compagnies de services et des utilisateurs finaux des saumures denses.

Industrija za predelavo nafte in zemeljskega plina – Tekočine in materiali za zaključna dela – 3. del: Preskušanje težkih slanic (ISO 13503-3:2005)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2005
• Withdrawal Date: 03-May-2022
• ICS: 75.100 - Lubricants, industrial oils and related products
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 04-May-2022
• Ref Project: SIST EN ISO 13503-3:2006 - Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines (ISO 13503-3:2005)

Relations

• Replaced By: EN ISO 13503-3:2022 - Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines (ISO 13503-3:2022)
• Effective Date: 17-Feb-2021
• Corrected By: EN ISO 13503-3:2005/AC:2007 - Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines (ISO 13503-3:2005/Cor 1:2006)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13503-3:2006
01-september-2006
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD±7HNRþLQHLQPDWHULDOL]D
]DNOMXþQDGHOD±GHO3UHVNXãDQMHWHåNLKVODQLF,62
Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing
of heavy brines (ISO 13503-3:2005)
Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten und -materialien - Teil 3:
Prüfung von schweren Solen (ISO 13503-3:2005)
Industries du pétrole et du gaz naturel - Fluides et matériaux de complétion - Partie 3:
Essais de saumures denses (ISO 13503-3:2005)
Ta slovenski standard je istoveten z: EN ISO 13503-3:2005
ICS:
75.180.30 Oprema za merjenje Volumetric equipment and
prostornine in merjenje measurements
SIST EN ISO 13503-3:2006 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13503-3:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 13503-3:2006
EUROPEAN STANDARD
EN ISO 13503-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2005
ICS 75.100

English Version
Petroleum and natural gas industries - Completion fluids and
materials - Part 3: Testing of heavy brines (ISO 13503-3:2005)
Industries du pétrole et du gaz naturel - Fluides et Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten
matériaux de complétion - Partie 3: Essais de saumures und -materialien - Teil 3: Prüfung von schweren Solen (ISO
denses (ISO 13503-3:2005) 13503-3:2005)
This European Standard was approved by CEN on 9 December 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13503-3:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13503-3:2006

EN ISO 13503-3:2005 (E)





Foreword


This document (EN ISO 13503-3:2005) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries", the secretariat of which is
held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2006, and conflicting national
standards shall be withdrawn at the latest by June 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 13503-3:2005 has been approved by CEN as EN ISO 13503-3:2005 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 13503-3:2006


INTERNATIONAL ISO
STANDARD 13503-3
First edition
2005-12-15


Petroleum and natural gas industries —
Completion fluids and materials —
Part 3:
Testing of heavy brines
Industries du pétrole et du gaz naturel — Fluides et matériaux de
complétion —
Partie 3: Essais de saumures denses





Reference number
ISO 13503-3:2005(E)
©
ISO 2005

---------------------- Page: 5 ----------------------

SIST EN ISO 13503-3:2006
ISO 13503-3:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are
...

SLOVENSKI STANDARD
SIST EN ISO 13503-3:2006
01-september-2006
Industrija za predelavo nafte in zemeljskega plina – Tekočine in materiali za
zaključna dela – 3. del: Preskušanje težkih slanic (ISO 13503-3:2005)
Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing
of heavy brines (ISO 13503-3:2005)
Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten und -materialien - Teil 3:
Prüfung von schweren Solen (ISO 13503-3:2005)
Industries du pétrole et du gaz naturel - Fluides et matériaux de complétion - Partie 3:
Essais de saumures denses (ISO 13503-3:2005)
Ta slovenski standard je istoveten z: EN ISO 13503-3:2005
ICS:
75.100 Maziva Lubricants, industrial oils and
related products
75.180.30 Oprema za merjenje Volumetric equipment and
prostornine in merjenje measurements
SIST EN ISO 13503-3:2006 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 13503-3:2006

---------------------- Page: 2 ----------------------
SIST EN ISO 13503-3:2006
EUROPEAN STANDARD
EN ISO 13503-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2005
ICS 75.100

English Version
Petroleum and natural gas industries - Completion fluids and
materials - Part 3: Testing of heavy brines (ISO 13503-3:2005)
Industries du pétrole et du gaz naturel - Fluides et Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten
matériaux de complétion - Partie 3: Essais de saumures und -materialien - Teil 3: Prüfung von schweren Solen (ISO
denses (ISO 13503-3:2005) 13503-3:2005)
This European Standard was approved by CEN on 9 December 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13503-3:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 13503-3:2006

EN ISO 13503-3:2005 (E)





Foreword


This document (EN ISO 13503-3:2005) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries", the secretariat of which is
held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2006, and conflicting national
standards shall be withdrawn at the latest by June 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 13503-3:2005 has been approved by CEN as EN ISO 13503-3:2005 without any
modifications.

2

---------------------- Page: 4 ----------------------
SIST EN ISO 13503-3:2006


INTERNATIONAL ISO
STANDARD 13503-3
First edition
2005-12-15


Petroleum and natural gas industries —
Completion fluids and materials —
Part 3:
Testing of heavy brines
Industries du pétrole et du gaz naturel — Fluides et matériaux de
complétion —
Partie 3: Essais de saumures denses





Reference number
ISO 13503-3:2005(E)
©
ISO 2005

---------------------- Page: 5 ----------------------
SIST EN ISO 13503-3:2006
ISO 13503-3:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall no
...