Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration (ISO 11810-1:2005)

This International Standard applies to disposable and reusable, as well as woven and non-woven materials used as surgical drapes and other patient protective covers which claim to be laser resistant.
The purpose of this standard is to provide a standardized method for testing and classifying surgical drapes and other patient protective covers with respect to laser-induced hazards. An appropriate classification system is given. It is not the purpose of this standard to serve as a general fire safety specification, and as such, this standard does not cover other sources of ignition. It also does not cover the issue of laser-induced secondary ignition.
All materials reflect portions of the beam and it is necessary for the user to decide whether specular reflectance may be a hazard. This measurement, however, is not covered in this standard.

Laser und Laseranlagen - Prüfverfahren und Einstufung zur Laserresistenz von Operationstüchern und/oder anderen Abdeckungen zum Schutz des Patienten - Teil 1: Primäre Entzündung und Laserdurchstrahlung (ISO 11810-1:2005)

Dieser Teil von ISO 11810 gilt für Einwegprodukte und wieder verwendbare gewebte Materialien und Vliesstoffe, die als Operationstücher und andere Abdeckungen zum Schutz des Patienten mit dem Anspruch auf Laserstrahlungsbeständigkeit verwendet werden.
Der Zweck dieses Teils von ISO 11810 ist, ein genormtes Verfahren zur Prüfung und Einstufung von Operationsabdecktüchern und anderen Abdeckungen zum Schutz des Patienten hinsichtlich der durch Laser hervor gerufenen Gefährdungen zur Verfügung zu stellen. Ein geeignetes Einstufungssystem wird angegeben. Der Zweck dieses Teils von ISO 11810 besteht nicht darin, als allgemeine Brandsicher-heitsvorschrift zu dienen, und insofern werden andere Zündquellen von dieser Norm nicht erfasst. Sie behandelt auch nicht das Thema der durch Laser hervorgerufenen sekundären Entzündung.
Alle Materialien reflektieren Anteile des Strahls, und es ist für den Anwender erforderlich, entscheiden zu können, ob die spiegelnde Reflexion eine Gefährdung darstellen kann. Diese Messungen werden jedoch in diesem Teil von ISO 11810 nicht erfasst.

Lasers et équipements associés aux lasers - Méthode d'essai et classification de la résistance au laser pour des draps chirurgicaux et/ou des couvertures de protection des patients - Partie 1: Allumage primaire et pénétration (ISO 11810-1:2005)

Laserji in z laserji povezana oprema - Preskusna metoda in klasifikacija za ugotavljanje odpornosti proti laserju za kirurške zastirke in/ali za varovalna pokrivala za paciente – 1. del: Primarno zgorevanje in prodiranje (ISO 11810-1:2005)

General Information

Status
Withdrawn
Publication Date
14-Feb-2005
Withdrawal Date
14-Apr-2009
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Apr-2009
Completion Date
15-Apr-2009

Relations

Buy Standard

Standard
EN ISO 11810-1:2005
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11810-1:2005
01-junij-2005
1DGRPHãþD
SIST EN ISO 11810:2003
Laserji in z laserji povezana oprema - Preskusna metoda in klasifikacija za
ugotavljanje odpornosti proti laserju za kirurške zastirke in/ali za varovalna
pokrivala za paciente – 1. del: Primarno zgorevanje in prodiranje (ISO 11810-
1:2005)
Lasers and laser-related equipment - Test method and classification for the laser
resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition
and penetration (ISO 11810-1:2005)
Laser und Laseranlagen - Prüfverfahren und Einstufung zur Laserresistenz von
Operationstüchern und/oder anderen Abdeckungen zum Schutz des Patienten - Teil 1:
Primäre Entzündung und Laserdurchstrahlung (ISO 11810-1:2005)
Lasers et équipements associés aux lasers - Méthode d'essai et classification de la
résistance au laser pour des draps chirurgicaux et/ou des couvertures de protection des
patients - Partie 1: Allumage primaire et pénétration (ISO 11810-1:2005)
Ta slovenski standard je istoveten z: EN ISO 11810-1:2005
ICS:
11.140 Oprema bolnišnic Hospital equipment
13.340.99 Druga varovalna oprema Other protective equipment
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN ISO 11810-1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11810-1:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 11810-1:2005



EUROPEAN STANDARD
EN ISO 11810-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2005
ICS 31.260; 13.340.99; 11.040.30 Supersedes EN ISO 11810:2002
English version
Lasers and laser-related equipment - Test method and
classification for the laser resistance of surgical drapes and/or
patient protective covers - Part 1: Primary ignition and
penetration (ISO 11810-1:2005)
Lasers et équipements associés aux lasers - Méthode Laser und Laseranlagen - Prüfverfahren und Einstufung zur
d'essai et classification de la résistance au laser pour des Laserresistenz von Operationstüchern und/oder anderen
draps chirurgicaux et/ou des couvertures de protection des Abdeckungen zum Schutz des Patienten - Teil 1: Primäre
patients - Partie 1: Allumage primaire et pénétration (ISO Entzündung und Laserdurchstrahlung (ISO 11810-1:2005)
11810-1:2005)
This European Standard was approved by CEN on 7 February 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11810-1:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11810-1:2005

EN ISO 11810-1:2005 (E)





Foreword


This document (EN ISO 11810-1:2005) has been prepared by Technical Committee ISO/TC 172
"Optics and optical instruments" in collaboration with Technical Committee CEN/TC 123 "Lasers
and photonics", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2005, and conflicting national
standards shall be withdrawn at the latest by August 2005.

This document supersedes EN ISO 11810:2002.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 11810-1:2005 has been approved by CEN as EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.