SIST EN ISO 16000-11:2024
(Main)Indoor air - Part 11: Determination of the emission of volatile organic compounds from samples of building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2024)
Indoor air - Part 11: Determination of the emission of volatile organic compounds from samples of building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2024)
This document specifies the sampling procedures, transport conditions, storage and substrate used that can affect emissions of volatile organic compounds for three types of building products or furnishing: solid, liquid and combined. For individual products, the preparation of a test specimen for each type is specified.
Innenraumluftverunreinigungen - Teil 11: Bestimmung der Emission von flüchtigen organischen Verbindungen aus Bauprodukten und Einrichtungsgegenständen - Probenahme, Lagerung der Proben und Vorbereitung der Prüfstücke (ISO 16000-11:2024)
Emissionsuntersuchungen von flüchtigen organischen Verbindungen aus ungenutzten Bauprodukten oder Einrichtungsgegenständen in Prüfkammern oder Prüfzellen setzen eine sorgfältige Behandlung der Prüfstücke vor und während der Prüfung voraus.
In diesem Dokument werden drei Typen von Bauprodukten oder Einrichtungsgegenständen definiert: feste, flüssige und kombinierte. Für jeden Produkttyp werden Angaben zu den Probenahmeverfahren, den Transportbedingungen, der Lagerung und den eingesetzten Trägermaterialien, die die Emissionen der flüchtigen organischen Verbindungen beeinflussen können, gemacht. Für einzelne Produkte wird die Vorbereitung des Prüfstücks für jeden Produkttyp beschrieben.
ANMERKUNG In Abhängigkeit von der Inhomogenität des Produktes können Messungen an verschiedenen Prüfstücken notwendig sein, um die spezifische Emissionsrate zu bestimmen.
Air intérieur - Partie 11: Dosage de l'émission de composés organiques volatils d'échantillons de produits de construction et d'objets d'équipement - Échantillonnage, conservation des échantillons et préparation des éprouvettes d'essais (ISO 16000-11:2024)
Le présent document spécifie les modes opératoires d’échantillonnage, les conditions de transport, le stockage et le support utilisés, susceptibles d’avoir une incidence sur les émissions de composés organiques volatils pour trois types de produit de construction ou objets d’équipement: solides, liquides et combinés. Pour les produits individuels, la préparation d’une éprouvette d’essai pour chaque type est spécifiée.
Notranji zrak - 11. del: Določanje emisije hlapnih organskih spojin iz vzorcev gradbenih proizvodov in opreme - Vzorčenje, shranjevanje vzorcev in priprava preskusnih vzorcev (ISO 16000-11:2024)
Ta dokument določa postopke vzorčenja, pogoje prevoza, shranjevanje in uporabljene podlage, ki lahko vplivajo na emisije hlapnih organskih spojin za tri vrste gradbenih proizvodov ali opreme: trdne, tekoče in kombinirane. Pri posameznih izdelkih je določena priprava preskušanca za posamezno vrsto.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Nadomešča:
SIST EN ISO 16000-11:2006
Notranji zrak - 11. del: Določanje emisije hlapnih organskih spojin iz vzorcev
gradbenih proizvodov in opreme - Vzorčenje, shranjevanje vzorcev in priprava
preskusnih vzorcev (ISO 16000-11:2024)
Indoor air - Part 11: Determination of the emission of volatile organic compounds from
samples of building products and furnishing - Sampling, storage of samples and
preparation of test specimens (ISO 16000-11:2024)
Innenraumluftverunreinigungen - Teil 11: Bestimmung der Emission von flüchtigen
organischen Verbindungen aus Bauprodukten und Einrichtungsgegenständen -
Probenahme, Lagerung der Proben und Vorbereitung der Prüfstücke (ISO 16000-
11:2024)
Air intérieur - Partie 11: Dosage de l'émission de composés organiques volatils
d'échantillons de produits de construction et d'objets d'équipement - Échantillonnage,
conservation des échantillons et préparation des éprouvettes d'essais (ISO 16000-
11:2024)
Ta slovenski standard je istoveten z: EN ISO 16000-11:2024
ICS:
13.040.20 Kakovost okoljskega zraka Ambient atmospheres
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 16000-11
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 13.040.20 Supersedes EN ISO 16000-11:2006
English Version
Indoor air - Part 11: Determination of the emission of
volatile organic compounds from samples of building
products and furnishing - Sampling, storage of samples
and preparation of test specimens (ISO 16000-11:2024)
Air intérieur - Partie 11: Dosage de l'émission de Innenraumluftverunreinigungen - Teil 11: Bestimmung
composés organiques volatils d'échantillons de der Emission von flüchtigen organischen
produits de construction et d'objets d'équipement - Verbindungen aus Bauprodukten und
Échantillonnage, conservation des échantillons et Einrichtungsgegenständen - Probenahme, Lagerung
préparation des éprouvettes d'essais (ISO 16000- der Proben und Vorbereitung der Prüfstücke (ISO
11:2024) 16000-11:2024)
This European Standard was approved by CEN on 15 March 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16000-11:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 16000-11:2024) has been prepared by Technical Committee ISO/TC 146 "Air
quality" in collaboration with Technical Committee CEN/TC 264 “Air quality” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards
shall be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 16000-11:2006.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 16000-11:2024 has been approved by CEN as EN ISO 16000-11:2024 without any
modification.
International
Standard
ISO 16000-11
Second edition
Indoor air —
2024-03
Part 11:
Determination of the emission of
volatile organic compounds from
samples of building products and
furnishing — Sampling, storage of
samples and preparation of test
specimens
Air intérieur —
Partie 11: Dosage de l'émission de composés organiques
volatils d'échantillons de produits de construction et d'objets
d'équipement ― Échantillonnage, conservation des échantillons
et préparation des éprouvettes d'essais
Reference number
ISO 16000-11:2024(en) © ISO 2024
ISO 16000-11:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 16000-11:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Sampling the product and transport and storage of sample . 2
4.1 Sampling of the product to be tested .2
4.2 Sample packaging and transport .2
4.3 Sample description .2
4.4 Storage of the sample prior to starting the testing .2
5 Preparation of test specimens . 3
Annex A (informative) Solid products — Procedure for sampling and test specimen preparation . 4
Annex B (informative) Liquid products — Procedure for sampling and test specimen
preparation . 7
Annex C (informative) Combined products .11
Annex D (informative) Cut edges emission.13
Bibliography . 14
iii
ISO 16000-11:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 146, Air quality, Subcommittee SC 6, Indoor
air, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC
264, Air quality, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
This second edition cancels and replaces the first edition (ISO 16000-11:2006), which has been technically
revised.
The main changes are as follows:
— detailed descriptions for the preparation of samples of liquid products like paints, varnishes and
impregnating primers have been added;
— the wet layer thickness instead of the dry film thickness for preparing liquid samples have been
recommended;
— sample preparation instructions have been added to determine the cut edge emissions.
A list of all parts in the ISO 16000 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO 16000-11:2024(en)
Introduction
The determination of volatile organic compounds (VOCs) emitted from building products and furnishing
using emission test chambers in conjunction with the standardised sampling, storage of samples and
preparation of test specimens has objectives such as:
— to provide manufacturers, builders and end users with emission data useful for the evaluation of the
impact of building products on the indoor air quality;
— to promote the development of improved products.
Studies of the emission of volatile organic compounds from building products or furnishing in test chambers
or cells require proper handling of the product prior to testing and during the testing period.
The method can in princip
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.