Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2010)

ISO 10156:2010 specifies methods for determining whether or not a gas or gas mixture is flammable in air and whether a gas or gas mixture is more or less oxidizing than air under atmospheric conditions.
It is intended to be used for the classification of gases and gas mixtures including the selection of gas cylinder valve outlets.
It does not cover the safe preparation of these mixtures under pressure and at temperatures other than ambient.

Gase und Gasgemische - Bestimmung der Brennbarkeid und des Oxidationsvermögens zur Auswahl von Ventilausgängen (ISO 10156:2010)

Diese Internationale Norm beinhaltet Verfahren zur Bestimmung darüber, ob ein Gas oder Gasgemisch
entzündbar in Luft ist oder nicht und ob ein Gas oder Gasgemisch stärker oder weniger oxidierend als Luft
unter atmosphärischen Bedingungen ist.
Es ist beabsichtigt, diese Internationale Norm zur Einstufung von Gasen und Gasgemischen einschließlich der
Auswahl von Gasflaschenventilausgängen zu nutzen.
Diese Internationale Norm erfasst nicht die sichere Herstellung dieser Gasgemische unter Druck und unter
anderen Temperaturen als Umgebungstemperaturen.

Gaz et mélanges de gaz - Détermination du potentiel d'inflammabilité et d'oxydation pour le choix des raccords de sortie de robinets (ISO 10156:2010)

L'ISO 10156:2010 spécifie des méthodes servant à déterminer si un gaz ou un mélange de gaz est ou non inflammable à l'air et si un gaz ou un mélange de gaz est plus ou moins oxydant que l'air, dans les conditions atmosphériques.
Elle est destinée à être utilisée pour la classification des gaz et des mélanges de gaz, y compris pour le choix des raccords de sortie de robinets de bouteilles à gaz.
Elle ne traite pas de la préparation en toute sécurité de ces mélanges à une pression et à des températures autres que les conditions ambiantes.

Plini in zmesi plinov - Določitev stopnje gorljivosti in oksidativnosti za izbiro izhodnega priključka ventila na jeklenki (ISO 10156:2010)

Ta mednarodni standard opredeljuje metode za določevanje ali je ali ni plin ali zmes plina gorljiva na zraku in ali je plin ali zmes plina bolj oksidativna kot zrak v atmosferskih pogojih. Ta mednarodni standard je namenjen temu, da se uporablja za klasifikacijo plinov in zmesi plinov, vključno z izbiro izhodnega priključka ventila na jeklenki. Ta mednarodni standard ne zajema varne priprave teh zmesi pod tlakom in pri temperaturi, ki nista okoljska.

General Information

Status
Withdrawn
Publication Date
31-Mar-2010
Withdrawal Date
29-Aug-2017
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
30-Aug-2017

Relations

Buy Standard

Standard
EN ISO 10156:2010
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10156:2010
01-november-2010
1DGRPHãþD
SIST EN ISO 10156-2:2005
SIST EN ISO 10156-2:2005/AC:2006
3OLQLLQ]PHVLSOLQRY'RORþLWHYVWRSQMHJRUOMLYRVWLLQRNVLGDWLYQRVWL]DL]ELUR
L]KRGQHJDSULNOMXþNDYHQWLODQDMHNOHQNL ,62
Gases and gas mixtures - Determination of fire potential and oxidizing ability for the
selection of cylinder valve outlets (ISO 10156:2010)
Gase und Gasgemische - Bestimmung der Brennbarkeid und des Oxidationsvermögens
zur Auswahl von Ventilausgängen (ISO 10156:2010)
Gaz et mélanges de gaz - Détermination du potentiel d'inflammabilité et d'oxydation pour
le choix des raccords de sortie de robinets (ISO 10156:2010)
Ta slovenski standard je istoveten z: EN ISO 10156:2010
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
71.100.20 Industrijski plini Gases for industrial
application
SIST EN ISO 10156:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10156:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 10156:2010


EUROPEAN STANDARD
EN ISO 10156

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2010
ICS 23.020.30; 71.100.20 Supersedes EN 720-2:1996, EN ISO 10156-2:2005
English Version
Gases and gas mixtures - Determination of fire potential and
oxidizing ability for the selection of cylinder valve outlets (ISO
10156:2010)
Gaz et mélanges de gaz - Détermination du potentiel Gase und Gasgemische - Bestimmung der Brennbarkeid
d'inflammabilité et d'oxydation pour le choix des raccords und des Oxidationsvermögens zur Auswahl von
de sortie de robinets (ISO 10156:2010) Ventilausgängen (ISO 10156:2010)
This European Standard was approved by CEN on 18 March 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10156:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10156:2010
EN ISO 10156:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10156:2010
EN ISO 10156:2010 (E)
Foreword
This document (EN ISO 10156:2010) has been prepared by Technical Committee ISO/TC 58 "Gas cylinders"
in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders”, the secretariat of which
is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at
the latest by October 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 720-2:1996, EN ISO 10156-2:2005.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerlan
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.