iTeh Standards logo
EURUSD
Your shopping cart is empty.
CEN

EN 10092-1:2003

(Main)

Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions

Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions

This Part of this European Standard specifies the nominal dimensions and the tolerances on dimensions and shape of hot rolled steel flat bars for springs with three different types of profiles (A, B, and C). Formulas for calculation the moment of inertia are specified in annex A.
This standard is applicable only to spring steel flat bars produced from steel grades specified in EN 10089.

Warmgewalzte Flachstäbe aus Federstahl - Teil 1: Flachstäbe - Maße, Formtoleranzen und Grenzabmaße

Dieser Teil dieser Europäischen Norm legt die Nennmaße, Grenzabmaße und Formtoleranzen warmgewalzter Flachstäbe aus Stahl für Federn in drei verschiedenen Profilarten (A, B und C) fest. Formeln für die Berechnung des Trägheitsmomentes sind in Anhang A enthalten.
Diese Norm gilt nur für Flachstäbe aus Federstahl, die aus den in EN 10089 festgelegten Stahlsorten hergestellt wurden.

Plats laminés à chaud ou aciers à ressorts - Tolérances sur la forme et les dimensions - Partie 1: Plats en acier laminés à chaud pour lames de ressorts

La présente partie de la présente Norme européenne spécifie les dimensions nominales et les tolérances sur les dimensions et la forme de plats en acier laminés à chaud pour lames de ressorts pour trois types différents de profils (A, B, et C). Les formules pour calculer le moment d'inertie sont spécifiées dans l'Annexe A.
La présente norme s'applique uniquement aux plats en acier pour lames de ressorts produits à partir des nuances d'acier spécifiées dans l'EN 10089.

Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions

General Information

Status
Published
Publication Date
28-Oct-2003
Withdrawal Date
29-Apr-2004
ICS
77.140.25 - Spring steels
77.140.60 - Steel bars and rods
Technical Committee
ECISS/TC 103 - Structural steels other than reinforcements
Drafting Committee
ECISS/TC 11/SC 1 - Hot rolled steel bars for engineering use. Dimensions and tolerances
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
11-Apr-2024
Completion Date
14-Apr-2025
Ref Project
SIST EN 10092-1:2004 - Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions

Overview

EN 10092-1:2003 (CEN) is the European standard that defines the nominal dimensions and tolerances on shape and dimensions for hot rolled spring steel flat bars. This Part 1 applies to flat bars intended for springs and covers three defined profile types: A, B and C. The standard also includes calculation formulas for the moment of inertia (Annex A) and is applicable only to spring steel flat bars manufactured from the steel grades given in EN 10089.

Key Topics

  • Scope and applicability
    • Defines the products covered: hot rolled spring steel flat bars for springs.
    • Restricts application to steels listed in EN 10089.
  • Nominal dimensions
    • Specifies how nominal widths and thicknesses of flat bars are presented and referenced.
  • Tolerances on dimensions
    • Gives permitted deviations from nominal sizes to ensure interchangeability and quality control.
  • Shape tolerances
    • Covers permissible variations in straightness, twist and other geometric form characteristics relevant to spring performance.
  • Profiles A, B and C
    • Recognizes three profile types (A, B, C); each profile addresses specific geometric or manufacturing characteristics relevant to different spring designs.
  • Annex A - Moment of inertia
    • Provides formulas for calculating moment of inertia of the flat bar cross-sections, useful for stiffness and deflection calculations.

Applications

EN 10092-1:2003 is directly useful wherever spring flat bars are specified, manufactured, inspected or used:

  • Design engineers calculating spring stiffness, deflection and fatigue life (using moment of inertia formulas).
  • Manufacturers of leaf springs, flat spring components, clips, and other strip-based spring parts who need to meet standardized dimensional and shape tolerances.
  • Quality and inspection teams verifying supplier deliveries against prescribed dimensional and shape tolerances.
  • Procurement and specification writers who need a clear, standardized reference for purchasing spring steel flat bars.
  • Automotive, railway and industrial spring producers where consistency in flat bar geometry affects assembly, performance and safety.

Related Standards

  • EN 10089 - Defines the spring steel grades to which EN 10092-1:2003 applies.
  • CEN framework: EN 10092-1 is a CEN technical specification within the suite of European standards for steel products.

This standard is essential when specifying or verifying hot rolled spring steel flat bars, ensuring consistent dimensions, acceptable shape tolerances and reliable mechanical behaviour in spring applications.

EN 10092-1:2004EN 10092-1:2004
PreviousNext
Standard
EN 10092-1:2004
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensionsWarmgewalzte Flachstäbe aus Federstahl - Teil 1: Flachstäbe - Maße, Formtoleranzen und GrenzabmaßePlats laminés a chaud ou aciers a ressorts - Tolérances sur la forme et les dimensions - Partie 1: Plats en acier laminés a chaud pour lames de ressortsHot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions77.140.60Jeklene
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

Frequently Asked Questions

EN 10092-1:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions". This standard covers: This Part of this European Standard specifies the nominal dimensions and the tolerances on dimensions and shape of hot rolled steel flat bars for springs with three different types of profiles (A, B, and C). Formulas for calculation the moment of inertia are specified in annex A. This standard is applicable only to spring steel flat bars produced from steel grades specified in EN 10089.

This Part of this European Standard specifies the nominal dimensions and the tolerances on dimensions and shape of hot rolled steel flat bars for springs with three different types of profiles (A, B, and C). Formulas for calculation the moment of inertia are specified in annex A. This standard is applicable only to spring steel flat bars produced from steel grades specified in EN 10089.

EN 10092-1:2003 is classified under the following ICS (International Classification for Standards) categories: 77.140.25 - Spring steels; 77.140.60 - Steel bars and rods. The ICS classification helps identify the subject area and facilitates finding related standards.

You can purchase EN 10092-1:2003 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.

This May Also Interest You

CEN
EN 10092-2:2003(Main)
Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensions
SIST EN 10092-2:2004

This Part of this European Standard specifies the nominal dimensions and the tolerances on dimensions and shape of hot rolled spring steel flat bars for ribbed and grooved spring leaves.
This standard is applicable only to steel flats produced from steel grades specified in EN 10089.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 71-20:2025(Main)
Safety of toys - Part 20: Microbiological safety of toys containing accessible aqueous media
kSIST FprEN 71-20:2025

This document specifies microbiological cleanliness and preservative efficacy requirements for accessible aqueous media in toys.
The requirements in this document apply to all toys that are, contain or are supplied with accessible aqueous materials (e.g. paste, putty, finger paint, liquid or gel).
The cleanliness and preservation effectiveness requirements are applicable to a toy as it is initially received by the consumer, in an unopened and undamaged container. This document does not apply to a toy that has been used, has had its packaging opened or is otherwise compromised in a way that would introduce microbiological contamination.
This document does not apply to toys and samples which are post-consumer use, since the microbiological limits are inappropriate given, there is no way to establish what conditions the toys have been subject to before testing.
This document does not apply to:
-   materials that are inaccessible during normal use or after reasonably foreseeable abuse;
-   food;
-   cosmetics;
-   components of toys covered by EN 71-13 where;
-   the component is in scope of the Cosmetic Products Regulation (i.e. Regulation (EC) No 1223/2009 [13];
-   the component comprises only recognized food flavours and food ingredients (see relevant legislation, for example Regulation (EC) No 178/2002 [16] ("general food law"), Regulation (EC) No 1334/2008 [15] (flavours), Regulation (EC) No 1333/2008 [14], Commission Regulation (EU) No 231/2012 [18] (food additives) and Regulation (EU) No 1169/2011 (food information to consumers)[17]);
-   experimental sets covered by EN 71-4.
NOTE   Play cosmetics, that are only for use on the toy (e.g. makeup products only for a doll), are not excluded.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4315:2025(Main)
Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Bars and sections - a or D ≤ 100 mm - Rm ≥ 900 MPa
kSIST FprEN 4315:2025

This document specifies the requirements relating to:
Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980)
Consumable electrode remelted
Solution treated and precipitation treated
Bars and sections
a or D ≤ 100 mm
Rm ≥ 900 MPa
for aerospace applications.
W.nr: 1.4980.
ASD-STAN designation: FE-PA2601.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 81-42:2025(Main)
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 42: Vertical lifting appliances with enclosed carrier intended for use by persons, including persons with disability
oSIST prEN 81-42:2022

1.1   This document specifies safety requirements for design, construction and manufacturing of permanently installed electrically powered vertical lifting appliances affixed to a building structure intended for use by persons, including persons with disability:
-   travelling vertically between predefined levels along a guided path whose inclination to the vertical does not exceed 15°;
-   supported or sustained by rack and pinion, rope traction drive, noncircular elastomeric-coated suspension means (hereafter called traction belts) traction drive, rope positive drive, chains, timing belts, screw and nut, guided chain or hydraulic jack (direct or indirect);
-   with enclosed wells;
-   with a rated speed not greater than 0,15 m/s;
-   with the carrier completely enclosed;
-   with a temperature in the well and in the machinery spaces between +5 °C and +40 °C.
1.2   This document does not specify additional requirements for:
-   lightning protection;
-   operation subject to ATEX rules;
-   lifting appliances whose primary function is the transportation of goods;
-   earthquakes, flooding;
-   firefighting and evacuation;
-   noise and vibrations;
-   the transport of type-C wheelchairs as defined in EN 12183:2022 and/or EN 12184:2022;
-   vertically sliding doors.
1.3   Components incorporated in a lifting appliance installation are:
a)   designed in accordance with usual engineering practice and calculation codes, taking into account all failure modes;
b)   of sound mechanical and electrical construction;
c)   free of defects.
1.4   This document is not applicable to lifting appliances manufactured before the date of its publication.

  • Draft
    176 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13126-10:2025(Main)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 10: Arm-balancing systems
kSIST FprEN 13126-10:2025

This document specifies requirements and test methods for durability, strength, security and function for arm-balancing systems for windows and door height windows - see Annex C.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4318:2025(Main)
Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm - Rm ≥ 960 MPa
kSIST FprEN 4318:2025

This document specifies the requirements relating to:
Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980)
Consumable electrode remelted
Solution treated and precipitation treated
Bars and sections
De ≤ 100 mm
Rm ≥ 960 MPa
for aerospace applications.
W.nr: 1.4980.
ASD-STAN designation: FE-PA2601.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9276:2025(Main)
Aerospace series - Programme management - Recommendations for the implementation of the integrated logistic support
kSIST FprEN 9276:2025

The purpose of this document is to:
—   identify and describe, in a structured way, the principles of the integrated logistic support (ILS) activities and tasks for the main types of stakeholders in the system life cycle, from the expression of need to disposal;
—   place the activities, tasks and ILS deliverables within the programme execution;
—   identify the main selection and sizing of activities and tasks criteria according to the nature and the requirements of the programme;
—   control the relations with the other aspects of programme management.
This document covers the following subjects:
—   management of ILS (definition, implementation and running of the processes);
—   expression of the support requirements;
—   elaboration of the contracts (e.g. for development, maintenance, supply);
—   implementation of the tasks and processes.
This document is also related to the following subjects:
—   relations with costs and lead times control, configuration management, performance and RAMS management, quality assurance, documentation management;
—   regulations (e.g. information system security, export controls, safety at work);
—   human and organizational factors (HOF);
—   environment (e.g. RoHS, REACh);
—   information systems (IS) and the links between them;
—   logistics information systems (LIS);
—   in-service support (ISS) activities;
—   configuration management of ILS objects;
—   life cycle.
The following stakeholders are concerned by ILS:
—   users in the broadest sense: operators, maintenance operators, administrators, dismantlers of the system, trainers;
—   the customer, who:
—   prepares technical and contractual specifications of need with which the system will comply;
—   sets up the funding of the programme;
—   oversees the realization and commissioning of the main system and of the support system;
—   facilitates the feedback.
NOTE 1   At the highest level of the system, the customer can also be referred to as the “project owner”.
NOTE 2   The “main system” can also be referred to as the “system of interest”.
—   the supplier(s) who deliver a system (main and support) to the customer, which meets the performance specifications on time and for the agreed cost, throughout the system life cycle;
NOTE 3   At the highest level of the system, the supplier can also be referred to as the “industrial prime contractor”.
—   the regulatory authorities that supervise and approve the support processes and equipment, as needed.
The principles laid down in this document can be applied, after adaptation, to all the customer/supplier relations resulting from the breakdown of the main contract into sub-contracts.

  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11929-2:2025(Main)
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 2: Advanced applications (ISO 11929-2:2025)
oSIST prEN ISO 11929-2:2025

The ISO 11929 series specifies a procedure, in the field of ionizing radiation metrology, for the calculation of the “decision threshold”, the “detection limit” and the “limits of the coverage interval” for a non-negative ionizing radiation measurand when counting measurements with preselection of time or counts are carried out. The measurand results from a gross count rate and a background count rate as well as from further quantities on the basis of a model of the evaluation. In particular, the measurand can be the net count rate as the difference of the gross count rate and the background count rate, or the net activity of a sample. It can also be influenced by calibration of the measuring system, by sample treatment and by other factors.
ISO 11929 has been divided into four parts covering elementary applications in ISO 11929-1, advanced applications on the basis of the GUM Supplement 1 in this document, applications to unfolding methods in ISO 11929-3, and guidance to the application in ISO 11929-4.
ISO 11929-1 covers basic applications of counting measurements frequently used in the field of ionizing radiation metrology. It is restricted to applications for which the uncertainties can be evaluated on the basis of the ISO/IEC Guide 98-3 (JCGM 2008). In ISO 11929-1:2025, Annex A, the special case of repeated counting measurements with random influences is covered, while measurements with linear analogous ratemeters are covered in ISO 11929-1:2025, Annex B.
ISO 11929-3 deals with the evaluation of measurements using unfolding methods and counting spectrometric multi-channel measurements if evaluated by unfolding methods, in particular, for alpha- and gamma‑spectrometric measurements. Further, it provides some advice on how to deal with correlations and covariances.
ISO 11929-4 gives guidance to the application of ISO 11929, summarizes shortly the general procedure and then presents a wide range of numerical examples. Information on the statistical roots of ISO 11929 and on its current development may be found elsewhere[30][31].
ISO 11929 also applies analogously to other measurements of any kind especially if a similar model of the evaluation is involved. Further practical examples can be found, for example, in ISO 18589[1], ISO 9696[2], ISO 9697[3], ISO 9698[4], ISO 10703[5], ISO 7503[6], ISO 28218[7] and ISO 11665[8].
NOTE            A code system, named UncertRadio, is available for calculations according to ISO 119291 to ISO 11929-3. UncertRadio[27][28] can be downloaded for free from https://www.thuenen.de/en/institutes/fisheries-ecology/fields-of-activity/marine-environment/coordination-centre-of-radioactivity/uncertradio. The download contains a setup installation file which copies all files and folders into a folder specified by the user. After installation one has to add information to the PATH of Windows as indicated by a pop‑up window during installation. English language can be chosen and extensive “help” information is available. Another tool is the package ‘metRology’[32] which is available for programming in R. It contains the two R functions ‘uncert’ and ‘uncertMC’ which perform the GUM conform uncertainty propagation, either analytically or by the Monte Carlo method, respectively. Covariances/correlations of input quantities are included. Applying these two functions within iterations for decision threshold and the detection limit calculations simplifies the programming effort significantly. It is also possible to imp

  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13126-12:2025(Main)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 12: Side hung projecting reversible hardware
kSIST FprEN 13126-12:2025

This document specifies requirements and test methods for durability, strength, security and function for side hung projecting reversible hardware for windows and door height windows.
NOTE   This document is applicable to side hung projecting reversible hardware whether fitted with integral restrictors or not. Where any restrictor is used it is intended to be tested in accordance with EN 13126-5.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23696-2:2025(Main)
Water quality - Determination of nitrate in water using small-scale sealed tubes - Part 2: Chromotropic acid colour reaction (ISO 23696-2:2023)
oSIST prEN ISO 23696-2:2025

This document specifies a method for the determination of nitrate as NO3-N in water of various origin such as natural water (including groundwater, surface water and bathing water), drinking water and wastewater, in a measuring range of concentration between 0,20 mg/l and 30 mg/l of NO3-N using the small-scale sealed tube method. Different measuring ranges of small-scale sealed tube methods can be required.
The measuring ranges can vary depending on the type of the small-scale sealed tube method of different manufacturers.
It is up to the user to choose the small-scale sealed tube test with the appropriate application range or to adapt samples with concentrations exceeding the measuring range of a test by preliminary dilution.
NOTE 1   The results of a small-scale sealed tube test are most precise in the middle of the application range of the test.
Manufacturers' small-scale sealed tube methods are based on chromotropic colour reaction, depending on the typical operating procedure of the small-scale sealed tube used, see Clause 9.
NOTE 2      Laws, regulations or standards can require that the data is expressed as NO3 after conversion with the stoichiometric conversion factor 4,426 81 in Clause 11.
NOTE 3   In the habitual language, use of sewage treatment and on the displays of automated sealed-tube test devices, NO3 without indication of the negative charge has become the common notation for the parameter nitrate and especially for the parameter nitrate-N. This notation is adopted in this document even though not being quite correct chemical nomenclature.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day