FprEN 16585-1
(Main)Railway applications - Design for PRM use - Equipment and components onboard rolling stock - Part 1: Toilets
Railway applications - Design for PRM use - Equipment and components onboard rolling stock - Part 1: Toilets
This European Standard describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard:
— the definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
— this standard defines elements which are universally valid for obstacle free travelling including toilets, elements for sitting, standing and moving and clearways and internal doors. The definitions and requirements of this standard are to be used for rolling stock applications;
— this standard only refers to aspects of accessibility for PRM passengers. It does not define general requirements and general definitions;
— this standard assumes that the rolling stock is in its defined operating condition;
— where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
The 'Equipment and Components' standard is written in three parts:
— this document is Part 1 and contains:
— toilets;
— part 2 contains:
— handholds;
— seats;
— wheelchair spaces;
— part 3 contains:
— clearways;
— internal doors.
Bahnanwendungen - Gestaltung für die Nutzung durch PRM - Ausstattung und Bauteile in Schienenfahrzeugen - Teil 1: Toiletten
Applications ferroviaires - Conception destinée à l'usage par les PMR - Equipements et éléments à bord du matériel roulant - Partie 1 : Toilettes
Železniške naprave - Načrtovanje za osebe z omejenimi gibalnimi sposobnostmi - Oprema in sestavni deli na železniških vozilih - 1. del: Stranišča
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2022
Železniške naprave - Načrtovanje za osebe z omejenimi gibalnimi sposobnostmi -
Oprema in sestavni deli na železniških vozilih - 1. del: Stranišča
Railway applications - Design for PRM use - Equipment and components onboard rolling
stock - Part 1: Toilets
Bahnanwendungen - Gestaltung für die Nutzung durch PRM - Ausstattung und Bauteile
in Schienenfahrzeugen - Teil 1: Toiletten
Applications ferroviaires - Conception destinée à l'usage par les PMR - Equipements et
éléments à bord du matériel roulant - Partie 1 : Toilettes
Ta slovenski standard je istoveten z: prEN 16585-1
ICS:
11.180.01 Pripomočki za Aids for disabled and
onesposobljene in handicapped persons in
hendikepirane osebe na general
splošno
45.060.20 Železniški vagoni Trailing stock
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
prEN 16585-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2022
ICS 11.180.01; 45.060.20 Will supersede EN 16585-1:2017
English Version
Railway applications - Design for PRM use - Equipment
and components onboard rolling stock - Part 1: Toilets
Applications ferroviaires - Conception destinée à Bahnanwendungen - Gestaltung für die Nutzung durch
l'usage par les PMR - Equipements et éléments à bord PRM - Ausstattung und Bauteile in Schienenfahrzeugen
du matériel roulant - Partie 1 : Toilettes - Teil 1: Toiletten
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16585-1:2022 E
worldwide for CEN national Members.
prEN 16585-1:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Symbols and abbreviations . 7
5 Requirements and assessment . 8
5.1 General. 8
5.2 Standard and universal toilets, common parameters . 8
5.3 Standard toilet . 9
5.4 Universal toilet . 10
5.5 Baby nappy changing table. 18
5.6 Interface of the call for aid device . 19
6 Assessment methodologies . 19
6.1 Lateral or side approach . 19
6.1.1 Introduction . 19
6.1.2 Assessment for a lateral or side approach . 20
6.2 Frontal or diagonal approach . 21
6.2.1 Introduction . 21
6.2.2 Assessment for a frontal or diagonal approach . 22
Annex A (normative) Engineering limits for an interoperable wheelchair transportable by
train . 24
A.1 Engineering limits . 24
A.2 Characteristics . 24
Annex B (normative) Simplified wheelchair profile and occupants reach range. 27
Annex C (informative) Wheelchair accessible toilet guidance and good practice . 29
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive (EU) 2016/797 aimed to be covered . 33
Bibliography . 35
prEN 16585-1:2022 (E)
European foreword
This document (prEN 16585-1:2022) has been prepared by Technical Committee CEN/TC 256 “Railway
applications”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 16585-1:2017.
In comparison with the previous edition, the following technical modifications have been made:
— The document template has been updated
— This document has been revised generally for document references and editorial issues with
grammar etc
— Scope modified
— Normative references updated
— Terms and definitions revised
— References updated
— Annex C “EC verification - Interoperability constituents” removed
— Annex D “Summary of testing requirements” removed
— Annex E “Wheelchair accessible toilet guidance and good practice” is now Annex C
— Annex ZA updated.
— Bibliography updated
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral part
of this document.
prEN 16585-1:2022 (E)
Introduction
This document is part of a suite of four ‘Design for PRM use’ standards that have in total nine parts:
— EN 16584 is a standard that covers both infrastructure and rolling stock — Railway applications —
Design for PRM use — General requirements:
— Part 1: Contrast (EN 16584-1)
— Part 2: Information (EN 16584-2)
— Part 3: Optical and friction characteristics (EN 16584-3).
— EN 16585 is a standard that covers rolling stock — Railway applications — Design for PRM use —
Equipment and components onboard rolling stock:
— Part 1: Toilets (EN 16585-1)
— Part 2: Elements for sitting, standing and moving (EN 16585-2)
— Part 3: Clearways and internal doors (EN 16585-3).
— EN 16586 is a standard that covers rolling stock — Railway applications — Design for PRM use —
Accessibility of persons with reduced mobility to rolling stock:
— Part 1: Steps for access and egress (EN 16586-1)
— Part 2: Boarding aids (EN 16586-2).
— EN 16587 is a standard that covers infrastructure — Railway applications — Design for PRM use —
Requirements for obstacle-free routes for infrastructure.
These standards aim to clarify the requirements (with clear and consistent terms and definitions) and to
define the associated criteria and, where appropriate, methodologies to allow a clear pass/fail
assessment.
prEN 16585-1:2022 (E)
1 Scope
This document describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the
assessment of those requirements. The following applies to this document:
— The definitions and requirements describe specific aspects of ‘Design for PRM use’ required by
persons with disabilities and persons with reduced mobility as defined in the PRM TSI
— This document defines elements which are universally valid for obstacle-free travelling including
toilets, elements for sitting, standing and moving and clearways and internal doors. The definitions
and requirements of this document are to be used for rolling stock applications
— This document only refers to aspects of accessibility for PRM passengers; it does not define non-PRM
related requirements and definitions.
— This document assumes that the rolling stock is in its defined operating condition
— Where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
— This document is not specifically intended for Urban Rail, however these standards or clauses from
these standards can be adopted by Urban Rail projects should they choose to do so.
The 'Equipment and Components' standard is written in three parts:
— This document is Part 1 and contains:
— Toilets
— Part 2 contains:
— Handholds
— Seats
— Wheelchair spaces
— Part 3 contains:
— Clearways
— Internal doors.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 12183, Manual wheelchairs - Requirements and test methods
EN 12221-1:2008+A1:2013, Child use and care articles - Changing units for domestic use - Part 1: Safety
requirements
EN 12221-2:2008+A1:2013, Child use and care articles - Changing units for domestic use - Part 2: Test
methods
prEN 16585-1:2022 (E)
EN 12790, Child use and care articles - Reclined cradles
EN 14752, Railway Applications - Bodyside Entrance Systems for Rolling Stock
prEN 16584-1:2022, Railway applications - Design for PRM use - General requirements - Part 1: Contrast
prEN 16584-2:2022, Railway applications - Design for PRM use - General requirements - Part 2:
Information
prEN 16585-2:2022, Railway applications - Design for PRM use - Equipment and components on board
rolling stock - Part 2: Elements for sitting, standing and moving
prEN 16585-3:2022, Railway applications - Design for PRM use - Equipment and components on board
rolling stock - Part 3: Clearways and internal doors
3 Terms and definitions
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at http://www.electropedia.org/
3.1
clear width
clear usable width
unobstructed width of an open door or clearway to allow all passengers, including PRM, to pass through
3.2
clearway
unobstructed space with defined widths and heights to allow movement within a vehicle
3.3
gap
distance between a platform and the closest point on the rolling stock at the passenger door where
passengers traverse from one to the other (both vertical and horizontal)
3.4
handrail
continuous element with round cross section for passengers to use to aid personal stability by gripping
around
3.5
manual door
unpowered door which the passenger has to physically open and/or close
3.6
palm operable
operable by the palm or any part of the hand, not requiring fingers to be unclenched
Note 1 to entry: The design need is that passengers with painful conditions, which affect their joints such as arthritis,
may be unable to (and are likely to experience discomfort or pain if they do) exert any force with the tip of a single
finger. Many may not be able to unclench their fingers to do this or
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.