FprEN 14037-1

Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 1: Technical specifications and requirements

This European Standard defines the technical specifications and requirements of ceiling mounted hot water radiant panels, heating and cooling surfaces fed with water at temperatures below 120 °C connected with a centralized heating and/or cooling supply source.

An der Decke frei abgehängte Heiz- und Kühlflächen für Wasser mit einer Temperatur unter 120 °C - Teil 1: Technische Spezifikationen und Anforderungen

Panneaux rayonnants de chauffage et de rafraîchissement alimentés avec une eau à une température inférieure à 120 °C - Partie 1: Spécifications techniques et exigences

Stropne sevalne plošče za ogrevanje in hlajenje površin za vodo s temperaturo pod 120 °C - 1. del: Tehnične specifikacije in zahteve

General Information

• Status: Not Published
• Publication Date: 12-Aug-2013
• Withdrawal Date: 12-Feb-2014
• ICS: 01.040.91 - Construction materials and building (Vocabularies)
• ICS: 91.140.10 - Central heating systems
• Technical Committee: CEN/TC 130 - Space heating appliances without integral heat sources
• Drafting Committee: CEN/TC 130/WG 7 - Pre-fabricated heating panels, definitions, testing and methods for determining heat outputs
• Current Stage: 4098 - Decision to abandon - Enquiry
• Start Date: 14-Oct-2013
• Completion Date: 14-Oct-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/129 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on space heating appliances
• Ref Project: oSIST prEN 14037-1:2012 - Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 1: Technical specifications and requirements

Relations

• Revises: EN 14037-1:2003 - Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 1: Technical specifications and requirements
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2012
6WURSQHVHYDOQHSORãþH]DRJUHYDQMHLQKODMHQMHSRYUãLQ]DYRGRVWHPSHUDWXUR
SRGƒ&GHO7HKQLþQHVSHFLILNDFLMHLQ]DKWHYH
Free hanging heating and cooling surfaces for water with a temperature below 120°C -
Part 1: Technical specifications and requirements
An der Decke frei abgehängte Heiz- und Kühlflächen für Wasser mit einer Temperatur
unter 120 °C - Teil 1: Technische Spezifikationen und Anforderungen
Panneaux rayonnants de chauffage et de rafraîchissement alimentés avec une eau à
une température inférieure à 120 °C - Partie 1: Spécifications techniques et exigences
Ta slovenski standard je istoveten z: prEN 14037-1
ICS:
01.040.91 Gradbeni materiali in gradnja Construction materials and
(Slovarji) building (Vocabularies)
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
91.140.65 Oprema za ogrevanje vode Water heating equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
DRAFT
prEN 14037-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2011
ICS 91.140.10 Will supersede EN 14037-1:2003
English Version
Free hanging heating and cooling surfaces for water with a
temperature below 120°C - Part 1: Technical specifications and
requirements
Panneaux rayonnants de chauffage et de rafraîchissement An der Decke frei abgehängte Heiz- und Kühlflächen für
alimentés avec une eau à une température inférieure à 120 Wasser mit einer Temperatur unter 120 °C - Teil 1:
°C - Partie 1: Spécifications techniques et exigences Technische Spezifikationen und Anforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 130.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14037-1:2011: E
worldwide for CEN national Members.

prEN 14037-1:2011 (E)
Contents
Foreword . 3
Introduction . 4
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Symbols and units . 10
5 Construction specifications . 12
5.1 General construction specifications. 12
5.2 Surface protection . 13
5.3 Surface emissivity . 13
5.4 Fixing points . 14
5.5 Pressure Test (factory test) . 14
5.6 Resistance to pressure (initial type testing) . 14
5.7 Dimensional tolerances . 14
5.8 Materials . 14
5.9 Upper Insulation . 14
5.10 Water flow resistance . 15
5.11 Release of dangerous substances . 15
5.12 Reaction to fire . 15
5.13 Rated thermal output and characteristic curve . 15
6 Maintenance of conformity . 15
7 Catalogue data, marking and labelling . 15
7.1 General . 15
7.2 Designation of the ceiling mounted radiant panels . 16
7.3 Maximum operating pressure . 16
7.4 Maximum operating temperature . 16
7.5 Thermal output respectively cooling capacity . 16
7.6 Dimensions and technical data . 16
7.7 Reference data . 17
7.8 Marking and labelling . 17
Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU
Construction Products Directive . 18
ZA.1 Scope and relevant characteristics . 18
ZA.2 Procedures for attestation of conformity of ceiling mounted radiant panels for water with a
temperature below 120 °C . 20
ZA.2.1 Systems of attestation of conformity . 20
ZA.2.2 EC Certificate and Declaration of conformity . 22
ZA.3 CE marking and labelling . 23
Bibliography . 25

prEN 14037-1:2011 (E)
Foreword
This document (prEN 14037-1:2011) has been prepared by Technical Committee CEN/TC 130 “Space heating
appliances without integral heat sources”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 14037-1:2003.
This document has been prepared under a mandate given to CEN by the European Commission and the European
Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
The main changes are:
- the title has been changed,
- new definitions according to the new parts 4 and 5 of this European Standard have been added,
- the Annex ZA has been adapted.
prEN 14037-1:2011 (E)
Introduction
This European Standard results from the recognition that the ceiling mounted heating and cooling surfaces falling
into the field of application hereinafter stated are traded of the basis of their thermal and cooling output. For evalu-
ating and comparing different ceiling mounted radiant panels it is therefore necessary to refer to a single stipulated
value.
The European Standard EN 14037, Free hanging heating and cooling surfaces for water with a temperature below
120°C consists of the following parts:
- Part 1: Technical specifications and requirements
- Part 2: Test method for thermal output of ceiling mounted radiant panels
- Part 3: Rating method and evaluation of radiant thermal output of ceiling mounted radiant panels
- Part 4: Test method for cooling capacity of ceiling mounted radiant panels
- Part 5: Test method for thermal output of open or closed heated ceiling surfaces

1 Scope
This European Standard defines the technical specifications and requirements of ceiling mounted radiant panels,
heating and cooling surfaces fed with water at temperatures below 120 °C connected with a centralized heating
and/or cooling supply source.
The European Standard does not apply to independent heating and/or cooling devices.
The European Standard also defines the additional common data that the manufacturer shall provide to the trade in
order to ensure the correct application of the products.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.
EN 13501-1, Fire classification of construction products and building elements - Part 1: Classification using data
from reaction to fire tests
prEN 14037-2, Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 2: Test
method for thermal output of ceiling mounted radiant panels
prEN 14037-3, Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 3: Rat-
ing method and evaluation of radiant thermal output of ceiling mounted radiant panels
prEN 14037-4, Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 4: Test
method for cooling capacity of ceiling mounted radiant panels
prEN 14037-5, Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 5: Test
method for thermal output of open or closed heated ceiling surfaces
prEN 14037-1:2011 (E)
3 Terms and definitions
For the purposes of this European Standard, the terms and definitions given below apply.
3.1
heating appliance
device having the purpose of transferring heat in order to provide specific temperature conditions inside buildings
3.2
independent heating appliance
self-contained heating appliance which does not need to be connected to a remote heat source (e. g. a boiler) as it
contains its own heat source (e. g. gas fired appliances, electric appliances, heat pump appliances)
3.3
heated and chilled ceiling surfaces

3.3.1
pre-fabricated ceiling mounted radiant panel
pre-fabricated heat-transmitting device in the form of a heating or cooling element with width of 0,3 m up to 1,5 m fit-
ted with connection components and designed to operate on water flow heating facilities and/or in cooling systems
3.3.2
open or closed ceiling surface
open or closed active and non active elements of chilled ceilings, which are additionally used for heating, which are
part of suspended ceilings and generally constructed modular from industrially prefabricated elements.
3.3.3
Free hanging sails
sails of cooling installations which are additionally used for heating
NOTE Depending on the use of the sails they can be covered with thermal insulation or noise absorption material.
3.3.4
Suspended ceiling with integrated heating elements
single closed elements integrated in closed hanging ceilings and combined with non active elements which are used
for heating and are therma
...