EN ISO 29022:2013

Dentistry - Adhesion - Notched-edge shear bond strength test (ISO 29022:2013)

ISO 29022:2013 specifies a shear test method used to determine the adhesive bond strength between direct dental restorative materials and tooth structure, e.g. dentine or enamel. The method as described is principally intended for dental adhesives. The method includes substrate selection, storage and handling of tooth structure, as well as the procedure for testing.

Zahnheilkunde - Adhäsion - Prüfung der Abscherverbundfestigkeit mit einer ausgesparten Klinge (ISO 29022:2013)

In dieser Internationalen Norm wird ein Abscherprüfverfahren beschrieben, mit dem die Abscher-verbundfestigkeit zwischen direkten zahnärztlichen Restaurationswerkstoffen und der Zahnstruktur, z. B. Dentin oder Schmelz, bestimmt werden kann. Das beschriebene Verfahren ist hauptsächlich für zahnärztliche Adhäsive vorgesehen. Das Verfahren beschreibt die Auswahl des Substrates, die Lagerung und Handhabung der Zahnstruktur, sowie die Durchführung der Prüfung.
ANMERKUNG 1   Weil die Prüfung der Haftfestigkeit an der Zahnstruktur techniksensitiv ist, sind Erfahrungen mit dem Prüfverfahren erforderlich.
ANMERKUNG 2   Das Prüfverfahren kann mit entsprechenden Änderungen auch für adhäsive Restaurationswerkstoffe (z. B. Glasionomerzemente) verwendet werden.

Médecine bucco-dentaire - Adhérence - Essai de résistance au cisaillement sur échantillons à bord entaillé (ISO 29022:2013)

L'ISO 29022:2013 spécifie une méthode d'essai de cisaillement qui permet de déterminer la force d'adhérence entre les produits de restauration dentaire directe et la structure dentaire, par exemple la dentine ou l'émail. La méthode décrite est principalement destinée aux adhésifs dentaires. La méthode comprend le choix du substrat, le stockage et le conditionnement de la structure dentaire, ainsi que le mode opératoire d'essai.

Zobozdravstvo - Adhezija - Preskus oprijemne trdnosti škarij z nazobčanim rezilom (ISO 29022:2013)

Ta mednarodni standard določa preskusno metodo škarij za ugotavljanje oprijemne trdnosti lepila med neposrednimi dentalnimi obnovitvenimi materiali in zobno strukturo, npr. dentinom ali zobno sklenino. Opisana metoda je prvenstveno namenjena za dentalna lepila. Metoda vključuje izbiro podlage, shranjevanje zobne strukture in rokovanje z njo ter postopek preskušanja.

General Information

• Status: Published
• Publication Date: 04-Jun-2013
• Withdrawal Date: 30-Dec-2013
• ICS: 11.060.01 - Dentistry in general
• ICS: 11.060.10 - Dental materials
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 05-Jun-2013
• Completion Date: 05-Jun-2013
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Ref Project: SIST EN ISO 29022:2013 - Dentistry - Adhesion - Notched-edge shear bond strength test (ISO 29022:2013)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 29022:2013
01-september-2013
=RER]GUDYVWYR$GKH]LMD3UHVNXVRSULMHPQHWUGQRVWLãNDULM]QD]REþDQLP
UH]LORP,62
Dentistry - Adhesion - Notched-edge shear bond strength test (ISO 29022:2013)
Zahnheilkunde - Haftfähigkeit - V-Kerb-Scherverbundfestigkeitsprüfung (ISO
29022:2013)
Médecine bucco-dentaire - Adhésion - Essai de résistance au cisaillement de bord
cranté (ISO 29022:2013)
Ta slovenski standard je istoveten z: EN ISO 29022:2013
ICS:
11.060.10 =RERWHKQLþQLPDWHULDOL Dental materials
SIST EN ISO 29022:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 29022:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 29022:2013


EUROPEAN STANDARD
EN ISO 29022

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2013
ICS 11.060.10
English Version
Dentistry - Adhesion - Notched-edge shear bond strength test
(ISO 29022:2013)
Médecine bucco-dentaire - Adhérence - Essai de Zahnheilkunde - Adhäsion - Verbundprüfung der
résistance au cisaillement sur échantillons à bord entaillé Abscherfestigkeit mit ausgesparter Klinge (ISO
(ISO 29022:2013) 29022:2013)
This European Standard was approved by CEN on 11 April 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 29022:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 29022:2013
EN ISO 29022:2013 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 29022:2013
EN ISO 29022:2013 (E)
Foreword
This document (EN ISO 29022:2013) has been prepared by Technical Committee ISO/TC 106 “Dentistry” in
collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2013, and conflicting national standards shall be withdrawn
at the latest by December 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 29022:2013 has been approved by CEN as EN ISO 29022:2013 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 29022:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 29022:2013
INTERNATIONAL ISO
STANDARD 29022
First edition
2013-06-01
Dentistry — Adhesion — Notched-
edge shear bond strength test
Médecine bucco-dentaire — Adhérence — Essai de résistance au
cisaillement sur échantillons à bord entaillé
Reference number
ISO 29022:2013(E)
©
ISO 2013

---------------------- Page: 7 ----------------------

SIST EN ISO 29022:2013
I
...