ENV 1401-3:2001

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Guidance for installation

This Prestandard, together with prEN1046:2000 and EN1610:1997,  provides a material-specific set of guidelines for the installation of piping systems made of unplasticized poly(vinyl chloride)  (PVC-U)  in the field of non-pressure underground drainage and sewerage - outside the building structure (application area code "U"); -  both buried in ground within the building structure (application area code "D")  and outside the building. This is reflected in the marking of products by "U" and "UD".

Kunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -leitungen - Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 3: Empfehlungen für die Verlegung

Anwendungsbereich
Diese Vornorm legt, zusammen mit prENV 1046:2000 und EN 1610:1997, eine Reihe von werkstoffspezifischen Empfehlungen für die Verlegung von Rohrleitungssystemen aus weichmacherfreiem Polyvinylchlorid (PVC-U) für Abwasserkanäle und -leitungen fest, die in erdverlegten Schwerkraftentwässerungssystemen
¾ außerhalb der Gebäudestruktur (Anwendungskennzeichen ¿U") sowie
¾ innerhalb der Gebäudestruktur (Anwendungskennzeichen ¿D") und außerhalb der Gebäude-
struktur
eingesetzt werden. Die Wahl des Anwendungsgebietes wird durch die Kennzeichnung ¿U" bzw. ¿UD" der Rohrleitungsteile angezeigt.

Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 3:Guide pour la pose

1 Domaine d'application
La présente partie de l'EN 1401 donne, avec le prEN 1046 et l'EN 1610 :1997, des lignes directrices pour la pose des systèmes de canalisation conformes à l'EN 1401.
Elle s'applique aux systèmes de canalisation réalisés en poly(chlorure de vinyle) non plastifiés (PVC-U), destinés à être utilisés pour les branchements et les collecteurs d'assainissement sans pression :
¾ à l'extérieur de la structure du bâtiment (code de zone d'application U) ; et
¾ aussi bien enterrés à l'intérieur du bâtiment (code de zone d'application D) qu'à l'extérieur du bâtiment.
Cela est repéré au niveau du marquage des produits par « U » et « UD ».
Il est nécessaire de tenir compte de toute réglementation national portant sur ce point.

Cevni sistemi iz polimernih materialov za odpadno vodo in kanalizacijo, ki delujejo po težnostnem principu in so položeni v zemljo - Nemehčan polivinilklorid (PVC-U) - 3. del: Navodilo za vgradnjo

General Information

• Status: Withdrawn
• Publication Date: 01-May-2001
• Withdrawal Date: 17-Dec-2013
• ICS: 23.040.01 - Pipeline components and pipelines in general
• ICS: 23.040.05 - Pipeline and its parts for external sewage systems
• ICS: 23.040.20 - Plastics pipes
• ICS: 23.040.45 - Plastics fittings
• ICS: 93.030 - External sewage systems
• Technical Committee: CEN/TC 155 - Plastics piping systems and ducting systems
• Drafting Committee: CEN/TC 155 - Plastics piping systems and ducting systems
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 18-Dec-2013
• Completion Date: 18-Dec-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Directive: 93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
• Mandate: M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
• Ref Project: SIST ENV 1401-3:2002 - Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Guidance for installation

Relations

• Replaced By: CEN/TR 1046:2013 - Thermoplastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for underground installation
• Effective Date: 25-Dec-2013

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2002
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DRGSDGQRYRGRLQNDQDOL]DFLMRNLGHOXMHMR
SRWHåQRVWQHPSULQFLSXLQVRSRORåHQLY]HPOMR1HPHKþDQSROLYLQLONORULG39&8
GHO1DYRGLOR]DYJUDGQMR
Plastics piping systems for non-pressure underground drainage and sewerage -
Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Guidance for installation
Kunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -
leitungen - Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 3: Empfehlungen für die
Verlegung
Systemes de canalisations en plastique pour les branchements et les collecteurs
d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U)
- Partie 3:Guide pour la pose
Ta slovenski standard je istoveten z: ENV 1401-3:2001
ICS:
23.040.01 Deli cevovodov in cevovodi Pipeline components and
na splošno pipelines in general
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN PRESTANDARD
ENV 1401-3
PRÉNORME EUROPÉENNE
EUROPÄISCHE VORNORM
May 2001
ICS 23.040.01
English version
Plastics piping systems for non-pressure underground drainage
and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part
3: Guidance for installation
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für erdverlegte drucklose
branchements et les collecteurs d'assainissement enterrés Abwasserkanäle und -leitungen - Weichmacherfreies
sans pression - Poly(chlorure de vinyle) non plastifié (PVC- Polyvinylchlorid (PVC-U) - Teil 3: Empfehlungen für die
U) - Partie 3:Guide pour la pose Verlegung
This European Prestandard (ENV) was approved by CEN on 23 March 2001 as a prospective standard for provisional application.
The period of validity of this ENV is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the ENV can be converted into a European Standard.
CEN members are required to announce the existence of this ENV in the same way as for an EN and to make the ENV available promptly
at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the ENV) until the final
decision about the possible conversion of the ENV into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. ENV 1401-3:2001 E
worldwide for CEN national Members.

Page 2
Contents
Page
Foreword .3
1 Scope.4
2 Normative references.4
3 Choice of stiffness (SN) series.4
3.1 General.4
3.2 Pipes.4
3.3 Fittings .5
3.4 Application area code D.5
4 Storage in sunlight .5
5 Handling and installation at low temperature.6
6 Push-fit joints (elastomeric sealings).6
7 Solvent cement joints .6
8 Maximum deviation from straightness.6
9 Connection to rigid structures.7
10 Repairs.7
11 Connection to existing pipes .8
12 Testing on site .8

Page 3
Foreword
This European Prestandard has been prepared by Technical Committee CEN/TC 155 "Plastics piping
systems and ducting systems", the secretariat of which is held by NEN.
This Prestandard is a Part of a System Standard for plastics piping systems of a particular material for
a specified application. There is a number of such System Standards.
System Standards are based on the results of the work undertaken in ISO/TC 138 "Plastics pipes,
fittings and valves for the transport of fluids", which is a Technical Committee of the International
Organization for Standardization (ISO).
They are supported by separate standards on test methods to which references are made throughout
the System Standard.
The System Standards are consistent with general standards on functional requirements and on
recommended practice for installation.
EN 1401 consists of the following Parts, under the general title Plastics piping systems for
non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U)
- Part 1: Specifications for pipes, fittings and the system
- Part 2: Guidance for assessment of conformity (ENV)
- Part 3: Guidance for installation (this prestandard)
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to announce this European Prestandard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.

Page 4
1  Scope
This Prestandard, together with prENV 1046:2000 and EN 1610:1997, provides a material-specific set
of guidelines for the installation of piping systems made of unplasticized poly(vinyl chloride) (PVC-U) in
the field of non-pressure underground drainage and sewerage.
- outside the building structure (application area code "U");
- both buried in ground within the building structure (application area code "D") and outside the
building.
This is reflected in the marking of products by "U" and "UD".
2  Normative references
This European Prestandard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Prestandard only when incorporated in it by amendment
or revision. For undated references the latest edition of the publication referred to applies (including
amendments).
prENV 1046:2000, Plastics piping and ducting systems — Systems outside building structures for the
conveyance of water or sewage — Practices for installation above and below ground
EN 1295-1, Structural d
...