iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10169:2010+A1:2012

(Main)

Continuously organic coated (coil coated) steel flat products - Technical delivery conditions

Continuously organic coated (coil coated) steel flat products - Technical delivery conditions

This European Standard specifies requirements for continuously organic coated (coil coated) steel flat products. It particularly specifies the performance requirements.
The products covered are wide strip, sheet cut from wide strip, slit wide strip, strip rolled in widths less than 600 mm and cut lengths (from sheet or strip).
NOTE   This document is not applicable to continuously organic coated flat products made of:
-   tinmill products,
-   electrical steels.

Kontinuierlich organisch beschichtete (bandbeschichtete) Flacherzeugnisse aus Stahl - Technische Lieferbedingungen

Dieses Dokument legt die Anforderungen an kontinuierlich organisch beschichtete (bandbeschichtete) Flacherzeugnisse aus Stahl fest, besonders im Hinblick auf die Gebrauchseigenschaften.
Bei den betroffenen Erzeugnissen handelt es sich um Breitband, aus Breitband geschnittenes Blech, längs geteiltes Breitband, gewalztes Band kleiner 600 mm Breite sowie (aus Band oder Blech) abgelängte Stäbe.
ANMERKUNG Diese Europäische Norm gilt nicht für kontinuierlich beschichtete Flacherzeugnisse aus:
- Verpackungsblech;
- Elektroband und -blech.

Produits plats en acier revêtus en continu de matières organiques (prélaqués) - Conditions techniques de livraison

La présente Norme européenne spécifie les exigences relatives aux produits plats en acier revêtus en continu de matières organiques (prélaqués) et, en particulier, les exigences de performance.
Les produits concernés sont des larges bandes, des tôles découpées dans les larges bandes, des larges bandes refendues, des bandes laminées en largeurs inférieures à 600 mm et des feuilles et bandes coupées à longueur.
NOTE   Le présent document n'est pas applicable aux produits plats revêtus en continu de matières organiques, fabriqués à l'aide de :
—   produits minces étamés,
—   aciers pour applications électriques.

Z organskimi materiali kontinuirno prevlečeni ploščati jekleni izdelki v svitkih - Tehnični dobavni pogoji

Ta evropski standard določa zahteve za z organskimi materiali kontinuirno prevlečene ploščate jeklene izdelke. Določa zlasti zahteve glede zmogljivosti. Izdelki, ki jih zajema, so široki trakovi, plošče, rezane iz širokih trakov, rezani široki trakovi, trakovi v svitkih s širino manj kot 600 mm in rezane dolžine (iz plošč in trakov).

General Information

Status
Withdrawn
Publication Date
27-Mar-2012
Withdrawal Date
15-Mar-2022
ICS
25.220.60 - Organic coatings
77.140.50 - Flat steel products and semi-products
Technical Committee
ECISS/TC 109 - Coated and uncoated flat products to be used for cold forming
Drafting Committee
ECISS/TC 109/WG 1 - Uncoated and coated flat products for cold forming and construction, except tin mill products
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
16-Mar-2022
Ref Project
SIST EN 10169:2011+A1:2012 - Continuously organic coated (coil coated) steel flat products - Technical delivery conditions

Relations

Merged From
EN 10169:2010 - Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
Effective Date
01-Feb-2012
Replaced By
EN 10169:2022 - Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
Effective Date
23-Mar-2022

Buy Standard

EN 10169:2011+A1:2012EN 10169:2011+A1:2012
PreviousNext
Standard
EN 10169:2011+A1:2012
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kontinuierlich organisch beschichtete (bandbeschichtete) Flacherzeugnisse aus Stahl - Technische LieferbedingungenProduits plats en acier revêtus en continu de matières organiques (prélaqués) - Conditions techniques de livraisonContinuously organic coated (coil coated) steel flat products - Technical delivery conditions77.140.50SROL]GHONLFlat steel products and semi-products25.220.60Organske prevlekeOrganic coatingsICS:Ta slovenski standard je istoveten z:EN 10169:2010+A1:2012SIST EN 10169:2011+A1:2012en,de01-julij-2012SIST EN 10169:2011+A1:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10169:2010+A1
March 2012 ICS 25.220.60; 77.140.50 Supersedes EN 10169:2010English Version
Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
Produits plats en acier revêtus en continu de matières organiques (prélaqués) - Conditions techniques de livraison Kontinuierlich organisch beschichtete (bandbeschichtete) Flacherzeugnisse aus Stahl - Technische Lieferbedingungen This European Standard was approved by CEN on 7 August 2010 and includes Amendment 1 approved by CEN on 14 February 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10169:2010+A1:2012: ESIST EN 10169:2011+A1:2012

Types of ambience . 29Annex B (informative)
Coating materials . 32SIST EN 10169:2011+A1:2012

Types of atmosphere (see also EN ISO 12944-2) . 33Annex D (informative)
Outdoor exposure sites. 34Annex E (informative)
Storage . 36Bibliography . 37 SIST EN 10169:2011+A1:2012

The products covered are wide strip, sheet cut from wide strip, slit wide strip, strip rolled in widths less than 600 mm and cut lengths (from sheet or strip). NOTE This document is not applicable to continuously organic coated flat products made of:  tinmill products,  electrical steels. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10020:2000, Definition and classification of grades of steel
EN 10021:2006, !General technical delivery conditions for steel products"
EN 10025-1, Hot-rolled products of structural steels — Part 1: General technical delivery conditions EN 10025-2, Hot-rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy structural steels EN 10048, Hot rolled narrow steel strip — Tolerances on dimensions and shape EN 10051, Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels — Tolerances on dimensions and shape EN 10079:2007, Definition of steel products EN 10111, Continuously hot rolled low carbon steel sheet and strip for cold forming — Technical delivery conditions
EN 10130, Cold rolled low carbon steel flat products for cold forming — Technical delivery conditions EN 10131, Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming —Tolerances on dimensions and shape EN 10139, Cold rolled uncoated mild steel narrow strip for cold forming — Technical delivery conditions
EN 10140, Cold rolled narrow steel strip — Tolerances on dimensions and shape EN 10143, Continuously hot-dip coated steel sheet and strip — Tolerances on dimensions and shape EN 10152, Electrolytically zinc coated cold rolled steel flat products for cold forming — Technical delivery conditions EN 10204:2004, Metallic products — Types of inspection documents EN 10268, Cold rolled steel flat products with high yield strength for cold forming — Technical delivery conditions
EN 13523-4, Coil coated metals — Test methods — Part 4: Pencil hardness EN 13523-5, Coil coated metals — Test methods — Part 5: Resistance to rapid deformation (impact test) EN 13523-6, Coil coated metals — Test methods — Part 6: Adhesion after indentation (cupping test) EN 13523-7, Coil coated metals — Test methods — Part 7: Resistance to cracking on bending (T-bend test) EN 13523-8, Coil coated metals — T
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 10169:2022(Main)
Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
SIST EN 10169:2022

This document specifies requirements for continuously organic coated (coil coated) steel flat products. It particularly specifies the performance requirements.
The products covered are wide strip, sheet cut from wide strip, slit wide strip, strip rolled in widths less than 600 mm and cut lengths (from sheet or strip).
NOTE   National provisions can set up relationships between the performances of the coatings as required in this document and the outdoor atmospheres and ambiances required for a relevant building under study.
This document is not applicable to continuously organic coated flat products made of:
- tin mill products;
- electrical steels.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10169:2022(Main)
Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
SIST EN 10169:2022

This document specifies requirements for continuously organic coated (coil coated) steel flat products. It particularly specifies the performance requirements.
The products covered are wide strip, sheet cut from wide strip, slit wide strip, strip rolled in widths less than 600 mm and cut lengths (from sheet or strip).
NOTE   National provisions can set up relationships between the performances of the coatings as required in this document and the outdoor atmospheres and ambiances required for a relevant building under study.
This document is not applicable to continuously organic coated flat products made of:
- tin mill products;
- electrical steels.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17677:2024(Main)
Food processing machinery - Craft bakery and pastry depositors - Safety and hygiene requirements
kSIST FprEN 17677:2024

1.1 This document specifies safety and hygiene requirements for the design and manufacture of craft bakery and pastry depositors as described in the normative Annex A and which:
a)   are intended to be:
-   only for professional use;
-   used by one operator at a time;
-   used to deposit only pasty food (i.e.: cream, dough, batter, etc.);
-   used to deposit only on trays;
-   used as standalone machines;
-   used with manual loading of the dough into the hopper;
-   used with manual loading and unloading of the tray/s on/from the tray conveyor.
b)   can carry out only the following movements and relevant directions (see Figure 1a)):
-   Z: vertical movement of the table and/or the deposit unit;
-   X: horizontal movement of the tray conveyor;
-   Y: possible horizontal component of the movement only of the spouts themselves inside the deposit unit;
c)   are fitted with one or more hoppers whose capacity is ≤ 60 dm3 each;
d)   have a total length of the tray conveyor ≤ 1 600 mm;
e)   have a vertical movement between spouts and tray conveyor (H) ≤ 200 mm (see Figure 1c));
f)   have a deposit performance (see 3.5):
-   ≤ 60 cycles/minute with up/down movement of the table or the deposit unit;
-   ≤ 100 cycles/minute without up/down movement of the table or the deposit unit;
g)   have a trays performance (see 3.6) ≤ 4 trays/minute.
This document deals with all significant hazards, hazardous situations and events relevant to adjustment, operation and cleaning of craft bakery and pastry depositors, when they are used as intended or under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document covers requirements for the safe operation of the machine, including loading, depositing, unloading and cleaning.
1.2 The following hazards are not covered by this document:
-   hazards arising from the use of an automatic hopper loading system;
-   hazards due to packaging, handling or transport;
-   hazards arising from electromagnetic compatibility issues;
-   hazards due to dismantling and disassembling;
-   hazards due to operational stop;
-   hazards due to selection of control or operating modes;
-   hazards due to failure of the power supply;
-   hazards due to surfaces, edges or angles;
-   hazards due to uncontrolled movements;
-   hazards due to machinery maintenance.
This standard does not deal with any specific requirements on noise emitted from craft bakery and pastry depositor as the generated noise does not cause a relevant hazard.
The significant hazards covered by this document are described in Annex B.
1.3 The following machines are excluded from the scope of this document:
a)   machines which deposit pasty food by means of needles (injection);
b)   machines where the trays are put onto and/or removed from the tray conveyor automatically;
c)   machines which require a blade for the cutting system;
d)   domestic appliances;
e)   machines for industrial production;
f)   machines to deposit other products than food for bakery and pastry products.
1.4 This document is not applicable to machines which are manufactured before the date of publication of this European Standard.

  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17137:2024(Main)
Textiles and textile products - Determination of the content of compounds based on chlorobenzenes and chlorotoluenes
kSIST FprEN 17137:2024

This document specifies a test method using gas chromatography with mass selective detector (GC-MS) for detection and quantification of chlorobenzenes, chlorotoluenes, and α-chlorinated toluenes in fibres, yarns, fabrics, coated fabrics and plastics.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17948:2024(Main)
Maintenance management and functions
kSIST FprEN 17948:2024

This document specifies the main content of maintenance management and the main activities for which maintenance management is responsible.
This document is applicable to maintenance managers and asset managers in the industry sector and for infrastructure and buildings in order to achieve the success factors of the organization.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 556-2:2024(Main)
Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 2: Requirements for aseptically processed medical devices
kSIST FprEN 556-2:2024

This document specifies the requirements for an aseptically processed medical device to be designated “STERILE”.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/CLC/TR 18115:2024(Main)
Data governance and quality for AI within the European context
kSIST-TP FprCEN/CLC/TR 18115:2024

This document provides an overview on AI-related standards, with a focus on data and data life cycles, to organizations, agencies, enterprises, developers, universities, researchers, focus groups, users, and other stakeholders that are experiencing this era of digital transformation.
It describes links among the many international standards and regulations published or under development, with the aim of promoting a common language, a greater culture of quality, giving an information framework.
It addresses the following areas:
-   data governance;
-   data quality;
-   elements for data, data sets properties to provide unbiased evaluation and information for testing.

  • Draft
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17992:2024(Main)
Food authenticity - Determination of the sum of 16-O-Methylcafestol, 16-O-Methylkahweol and their derivatives in roasted coffee by ¹H-qNMR
kSIST FprEN 17992:2024

This document specifies a method for the determination of soluble 16-O-Methylcafestol and 16-O-Methylkahweol content (the sum of free forms and derivatives, e.g. fatty acid esters, henceforth abbreviated as 16-OMD = “diterpenes”) in roasted coffee (beans or ground), using quantitative proton nuclear magnetic resonance spectroscopy (1H-qNMR).
If complying with the experimental parameters described below, this test procedure has been proven for the following mass fraction range:
w16-OMD:    20 mg/kg to 2 000 mg/kg.
The mass fraction range can be expanded by suitable changes of the experimental parameters, e.g. a different weighed portion of ground coffee or the accumulation of more NMR-transients.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22476-16:2024(Main)
Geotechnical investigation and testing - Field testing - Part 16: Borehole shear test (ISO 22476‑16:2024)
kSIST FprEN ISO 22476-16:2023

This document is applicable to the borehole shear test using the phicometer procedure, commonly named the phicometer test (etymologically derived from phi for friction angle, co for cohesion and meter for measurement).
The test can be performed in all types of natural soils, fills and artificial soils, which can be saturated or not.
It does not apply to very soft fine soils, very loose coarse soils, medium strong to very strong rocks and natural or artificial soils with a predominance of cobbles having a particle diameter greater than 150 mm.
Generally, the test is applicable in soils with an order of magnitude of their in situ resistance characteristics as follows:
—     Ménard pressuremeter limit pressure: 0,4 MPa < plM < 3,5 MPa approximately or more than 4 MPa in granular non-cohesive soils;
—     CPT Cone resistance: 1,5 MPa —     SPT N: 8 The test can also be carried out in soils presenting a resistance outside these application limits as long as the representativeness of the results is assessed or validated by the analysis of the PBST graphs (see Clause 8).
This document applies only to tests carried out at a depth less than or equal to 30 m.
The parameters derived from this test are the shear strength properties, as the cohesion and angle of friction.

  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16214-1:2024(Main)
Sustainability and greenhouse gas emission saving criteria for biomass for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology
KSIST FprEN 16214-1:2023

This document specifies the terminology to be used in the field of sustainability and greenhouse gas emission saving criteria for biomass for energy applications. This document specifically considers some relevant terms and definitions used in European Commission Directive 2018/EU/2001, the recast of the Renewable Energy Directive (RED II), and the European Commission Directive 2009/30/EC referred to as Fuel Quality Directive (FQD), or in other related European regulations.

  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day