Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003)

ISO 17639:2003 gives recommendations for specimen preparation, test procedures and their main objectives for macroscopic and microscopic examination.

Zerstörende Prüfung von Schweißverbindungen an metallischen Werkstoffen - Makroskopische und mikroskopische Untersuchungen von Schweißnähten (ISO 17639:2003)

Diese Norm legt die Verfahren zur Probenvorbereitung, Prüfverfahren und ihre hauptsächlichen Prüfziele für die makroskopische und mikroskopische Untersuchung fest.

Essais destructifs des soudures sur matériaux métalliques - Examens macroscopique et microscopique des assemblages soudés (ISO 17639:2003)

L'ISO 17639:2003 spécifie un mode opératoire d'essai et ses principaux objectifs concernant les examens macroscopique et microscopique des assemblages soudés.

Porušitveni preskusi zvarov na kovinskih materialih - Makroskopska in mikroskopska preiskava zvarov (ISO 17639:2003)

Ta mednarodni standard navaja priporočila za pripravo preskusnih vzorcev, preskusne postopke in njihove glavne cilje za makroskopsko in mikroskopsko preiskavo.

General Information

Status
Withdrawn
Publication Date
13-Aug-2013
Withdrawal Date
15-Feb-2022
Technical Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
16-Feb-2022

Relations

Buy Standard

Standard
EN ISO 17639:2013
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17639:2013
01-december-2013
1DGRPHãþD
SIST EN 1321:1998
Porušitveni preskusi zvarov na kovinskih materialih - Makroskopska in
mikroskopska preiskava zvarov (ISO 17639:2003)
Destructive tests on welds in metallic materials - Macroscopic and microscopic
examination of welds (ISO 17639:2003)
Zerstörende Prüfung von Schweißverbindungen an metallischen Werkstoffen -
Makroskopische und mikroskopische Untersuchungen von Schweißnähten (ISO
17639:2003)
Essais destructifs des soudures sur matériaux métalliques - Examens macroscopique et
microscopique des assemblages soudés (ISO 17639:2003)
Ta slovenski standard je istoveten z: EN ISO 17639:2013
ICS:
25.160.40 Varjeni spoji in vari Welded joints
SIST EN ISO 17639:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17639:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 17639:2013


EUROPEAN STANDARD
EN ISO 17639

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2013
ICS 25.160.40 Supersedes EN 1321:1996
English Version
Destructive tests on welds in metallic materials - Macroscopic
and microscopic examination of welds (ISO 17639:2003)
Essais destructifs des soudures sur matériaux métalliques - Zerstörende Prüfung von Schweißverbindungen an
Examens macroscopique et microscopique des metallischen Werkstoffen - Makroskopische und
assemblages soudés (ISO 17639:2003) mikroskopische Untersuchungen von Schweißnähten (ISO
17639:2003)
This European Standard was approved by CEN on 8 August 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17639:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17639:2013
EN ISO 17639:2013 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 17639:2013
EN ISO 17639:2013 (E)
Foreword
The text of ISO 17639:2003 has been prepared by Technical Committee ISO/TC 44 “Welding and allied
processes” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
17639:2013 by Technical Committee CEN/TC 121 “Welding” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2014, and conflicting national standards shall be withdrawn
at the latest by February 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1321:1996.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17639:2003 has been approved by CEN as EN ISO 17639:2013 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 17639:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 17639:2013


INTERNATIONAL ISO
STANDARD 17639
First edition
2003-09-01


Destructive tests on welds in metallic
materials — Macroscopic and
microscopic examination of welds
Essais destructifs des soudures sur matériaux métalliques — Examens
macroscopique et microscopique des assemblages soudés





Reference number
ISO 17639:2003(E)
©
ISO 2003

---------------------- Page: 7 ----------------------

SIST EN ISO 17639:2013
ISO 17639:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2003 — All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 17639:2013
ISO 17639:2003(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 1
4 Abbreviations . 2
5 Principle . 2
6 Purpose of the test. 2
7 Removal of test specimens. 2
8 Test procedure . 4
8.1 General. 4
8.2 Test specimen preparation . 4
8.3 Surface finish . 4
8.4 Etching methods . 4
8.5 Etchants . 5
8.6 Safety measures. 5
9 Examination. 5
10 Designation. 5
11 Test report. 8
Annex A (informative) Example of a test report . 9

© ISO 2003 — All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 17639:2013
ISO 17639:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17639 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee
SC 5, Testing and inspection of welds.
Requests for official interpretation of any aspect of this International Standard should be directed to the
Secretariat of ISO/TC 44/SC 5 via the member body in the user's country, a complete listing of which can be
found at www.iso.org.

iv © ISO 2003 — All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 17639:2013
INTERNATIONAL STANDARD ISO 17639:20
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.