EN 14987:2006
(Main)Plastics - Evaluation of disposability in waste water treatment plants - Test scheme for final acceptance and specifications
Plastics - Evaluation of disposability in waste water treatment plants - Test scheme for final acceptance and specifications
This European Standard specifies test methods and criteria which are to be applied in order to verify if a solid plastic material can be considered as disposable in waste water treatment plants, i.e. it does not create problems for the environment and for the drainage systems. In order to reach this conclusion it needs be verified that the plastic material under evaluation is biodegradable under aerobic conditions (i.e. susceptible to mineralization) and water soluble or water dispersible.
NOTE Plastic materials which are shown to be in compliance with this European Standard can be used to produce items which, for their characteristics of water solubility or water dispersibility and biodegradability, can be eventually disposed of in municipal or industrial waste water treatment plants, through the sewage.
Kunststoffe - Bewertung der Entsorgbarkeit in Kläranlagen - Prüfplan für Endabnahme und Spezifikationen
Plastiques - Evaluation de l'aptitude des plastiques à être éliminés dans des stations de traitement des eaux usées - Plan d'essai pour acceptation finale et spécifications
La présente Norme Européenne spécifie les méthodes d’essai et les critères qui doivent être appliqués pour vérifier si un matériau plastique solide peut être considéré comme éliminable dans des stations de traitement des eaux usées, et donc non susceptible d’induire des problèmes pour l’environnement et les systèmes d’assainissement. Pour en conclure qu’il est éliminable dans ces stations, il est nécessaire de vérifier que le matériau plastique soumis à l’évaluation est biodégradable dans des conditions aérobies (c’est-à-dire apte à la minéralisation), et soluble ou dispersable dans l’eau.
NOTE Les matériaux plastiques conformes à la présente Norme Européenne peuvent être utilisés pour fabriquer des articles qui, en raison de leur solubilité ou dispersabilité dans l’eau et de leur biodégradabilité, peuvent en fin de vie être éliminés dans les stations de traitement des eaux usées urbaines ou industrielles.
Polimerni materiali - Vrednotenje primernosti za odlaganje v čistilnih napravah za odpadno vodo - Preskusna shema za končni prevzem in specifikacije
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Plastics - Evaluation of disposability in waste water treatment plants - Test scheme for final acceptance and specificationsPlastiques - Evaluation de l'aptitude des plastiques a etre éliminés dans des stations de traitement des eaux usées - Plan d'essai pour acceptation finale et spécificationsKunststoffe - Bewertung der Entsorgbarkeit in Kläranlagen - Prüfplan für Endabnahme und SpezifikationenTa slovenski standard je istoveten z:EN 14987:2006SIST EN 14987:2007en;fr;de83.080.01Polimerni materiali na splošnoPlastics in general13.060.30Odpadna vodaSewage waterICS:SLOVENSKI
STANDARDSIST EN 14987:200701-april-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14987November 2006ICS 13.060.30; 83.080.01 English VersionPlastics - Evaluation of disposability in waste water treatmentplants - Test scheme for final acceptance and specificationsPlastiques - Evaluation de l'aptitude des plastiques à êtreéliminés dans des stations de traitement des eaux usées -Plan d'essai pour acceptation finale et spécificationsKunststoffe - Bewertung der Entsorgbarkeit in Kläranlagen -Prüfplan für Endabnahme und SpezifikationenThis European Standard was approved by CEN on 6 October 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14987:2006: E
EN 14987:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.5 5 Test methods.5 6 Requirements.7 7 Classification and designation.7 8 Test report.8 Bibliography.9
EN 14987:2006 (E) 3 Foreword This document (EN 14987:2006) has been prepared by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held by IBN/BIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2007, and conflicting national standards shall be withdrawn at the latest by May 2007. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.