EN 13032-4:2015/prA1
(Amendment)Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires
This European Standard specifies the requirements for measurement of electrical, photometric, and colorimetric quantities of LED lamps, modules, light engines and luminaires, for operation with AC or DC supply voltages, possibly with associated control gear. Photometric and colorimetric quantities covered in this standard include total luminous flux, luminous efficacy, partial luminous flux, luminous intensity distribution, centre-beam intensities, luminance and luminance distribution, chromaticity coordinates, correlated color temperature (CCT), Color Rendering Index (CRI), and spatial uniformity of chromaticity.
This standard does not cover LED packages and products based on OLEDs (organic LEDs).
NOTE Where the term "LED product, LED device or DUT (device under test)" is used, the term covers LED lamps, modules, light engines or luminaires.
Licht und Beleuchtung - Messung und Darstellung photometrischer Daten von Lampen und Leuchten - Teil 4: LED-Lampen, -Module und -Leuchten
Diese Europäische Norm gibt die Anforderungen zur Messung der elektrischen, photometrischen und farbmetrischen Größen von LED-Lampen, -Modulen, -Light-Engines und -Leuchten beim Betrieb mit Wechsel- oder Gleichspannung, möglicherweise mit dazugehörigen Betriebsgeräten, an. Die photometrischen und farbmetrischen Größen, die von dieser Norm abgedeckt werden, beinhalten den Gesamtlichtstrom, Lichtausbeute, Teillichtstrom, Lichtstärkeverteilung, Achslichtstärken, Leuchtdichte und Leuchtdichteverteilung, Normfarbwertanteile, ähnlichste Farbtemperatur (CCT), Farbwiedergabe-Index (CRI) und räumliche Gleichmäßigkeit der Farbigkeit.
Diese Norm behandelt keine LED-Packages und Produkte, die auf OLEDs basieren (organische LEDs).
ANMERKUNG Wenn der Ausdruck „LED-Produkt, LED-Einheit oder Prüfobjekt (en: DUT, device under test) benutzt wird, beinhaltet dieser Begriff LED-Lampen, -Module, -Light-Engines und -Leuchten.
Lumière et éclairage - Mesure et présentation des données photométriques des lampes et des luminaires - Partie 4 : Lampes, modules et luminaires LED
La présente norme spécifie les exigences relatives à la mesure des grandeurs électriques, photométriques et colorimétriques des lampes, modules, moteurs lumière et luminaires à LED, destinés à fonctionner avec des tensions d'alimentation alternatives ou continue, éventuellement avec un appareillage associé. Les grandeurs photométriques et colorimétriques couvertes par la présente norme comprennent le flux lumineux total, l'efficacité lumineuse, la répartition de l'intensité lumineuse, l'intensité dans l'axe du faisceau, la luminance et la répartition de la luminance, les coordonnées trichromatiques, la température de couleur proximale (CCT), l'indice de rendu des couleurs (IRC) et l'uniformité spatiale de la chromaticité.
La présente norme ne traite pas des boîtiers de LED et des produits basés sur les OLED (LED organiques).
NOTE Lorsque le terme « produit LED, dispositif à LED ou DSE (dispositif soumis à essai) » est utilisé, le terme couvre les lampes, modules, moteurs lumière ou luminaires LED.
Svetloba in razsvetljava - Merjenje in podajanje fotometričnih podatkov sijalk in svetilk - 4. del: LED-sijalke, moduli in svetilke
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13032-4:2015/oprA1:2018
01-september-2018
6YHWOREDLQUD]VYHWOMDYD0HUMHQMHLQSRGDMDQMHIRWRPHWULþQLKSRGDWNRYVLMDONLQ
VYHWLOGHO /('VLMDONHPRGXOLLQVYHWLOD
Light and lighting - Measurement and presentation of photometric data of lamps and
luminaires - Part 4: LED lamps, modules and luminaires
Licht und Beleuchtung - Messung und Darstellung photometrischer Daten von Lampen
und Leuchten - Teil 4: LED-Lampen, -Module und -Leuchten
Lumière et éclairage - Mesure et présentation des données photométriques des lampes
et des luminaires - Partie 4 : Lampes, modules et luminaires LED
Ta slovenski standard je istoveten z: EN 13032-4:2015/prA1
ICS:
17.180.20 Barve in merjenje svetlobe Colours and measurement of
light
91.160.01 Razsvetljava na splošno Lighting in general
SIST EN 13032-4:2015/oprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13032-4:2015/oprA1:2018
---------------------- Page: 2 ----------------------
SIST EN 13032-4:2015/oprA1:2018
DRAFT
EUROPEAN STANDARD
EN 13032-4:2015
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2018
ICS 17.180.20; 29.140.99
English Version
Light and lighting - Measurement and presentation of
photometric data of lamps and luminaires - Part 4: LED
lamps, modules and luminaires
Lumière et éclairage - Mesure et présentation des Licht und Beleuchtung - Messung und Darstellung
données photométriques des lampes et des luminaires photometrischer Daten von Lampen und Leuchten -
- Partie 4 : Lampes, modules et luminaires LED Teil 4: LED-Lampen, -Module und -Leuchten
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 169.
This draft amendment A1, if approved, will modify the European Standard EN 13032-4:2015. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13032-4:2015/prA1:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13032-4:2015/oprA1:2018
EN 13032-4:2015/prA1:2018 (E)
Contents Page
European foreword . 3
1 Modification to the European foreword . 4
2 Modification to Clause 1, Scope . 4
3 Modification to Clause 2, Normative references . 4
4 Modifications to Clause 3, Terms and definitions . 4
5 Modification to 6.1, General . 5
6 Modifications to 6.3, Partial luminous flux. 5
7 Modification to the bibliography . 6
8 Addition of Annexes ZA to ZC .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.