ENV 852:2001

Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values

This Prestandard is applicable to plastics pipes, joints and fittings to be used for the transport of water intended for human consumption and raw water used for the manufacture of water intended for human consumption.
It gives guidance on:
1) number of successive migration periods to be carried out;
2) how to interpret M values calculated from successive migration periods;
3) a method for converting M values into values that reflect field use conditions;
4) acceptance criteria for the duplicate M values obtained by testing in accordance with EN ISO 8795.

Kunststoff-Rohrleitungssysteme für den Transport von Wasser für den menschlichen Verzehr - Bewertung der Migration - Anleitung für die Beurteilung von aus Laborversuchen abgeleiteten Migrationswerten

Diese Vornorm ist auf Rohre, Formstücke und Verbindungen aus Kunststoff anwendbar, die zum Transport von Wasser für den menschlichen Verzehr und von Rohwasser, das zur Herstellung von Wasser für den menschlichen Verzehr vorgesehen ist, verwendet werden.
Sie gibt Anleitung für
1) Anzahl durchzuführender aufeinander folgender Migrationsphasen;
2) Art und Weise der Beurteilung der aus den aufeinander folgenden Migrationsphasen berechneten Migrationswerte;
3) Verfahren zur Umwandlung von Migrationswerten in Werte, die Gebrauchsbedingungen widerspiegeln;
4) Annahmekriterien für die bei der Prüfung nach EN ISO 8795 erhaltenen doppelt bestimmten Migrationswerte.

Systèmes de canalisations plastiques pour le transport d'eau destinée à la consommation humaine - Evaluation de la migration - Guide d'interprétation des valeurs de migration déterminées en laboratoire

La présente Prénorme est applicable aux tubes, raccords et assemblages plastiques utilisables pour le transport de l'eau destinée à la consommation humaine et de l'eau brute utilisée pour la production d'eau potable.
Elle donne des indications sur :
a) le nombre de périodes de migration successives à effectuer ;
b) la façon d'interpréter les valeurs de M, calculées à partir des périodes de migration successives ;
c) une méthode permettant de convertir les valeurs calculées de M en valeurs reflétant les conditions d'utilisation sur le terrain ;
d) les critères d'acceptation des contre-valeurs de M obtenues en effectuant des essais conformément à l'EN ISO 8795.

Cevni sistemi iz polimernih materialov za transport pitne vode - Vrednotenje migracije - Navodilo za razlago laboratorijsko pridobljenih migracijskih vrednosti

General Information

• Status: Withdrawn
• Publication Date: 28-Aug-2001
• Withdrawal Date: 14-Dec-2010
• ICS: 67.250 - Materials and articles in contact with foodstuffs
• ICS: 83.140.30 - Plastics pipes and fittings for non fluid use
• Technical Committee: CEN/TC 155 - Plastics piping systems and ducting systems
• Drafting Committee: CEN/TC 155/WG 2 - Evaluation methods and requirements specific for plastics piping systems in regard to effects on quality of water intended for human consumption
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Dec-2010
• Completion Date: 15-Dec-2010
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/136 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on construction products in contact with water intended for human consumption
• Mandate: M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
• Ref Project: SIST ENV 852:2002 - Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values

Relations

• Replaced By: CEN/TR 852:2010 - Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values
• Effective Date: 18-Dec-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 852:2002
01-junij-2002
Cevni sistemi iz polimernih materialov za transport pitne vode - Vrednotenje
migracije - Navodilo za razlago laboratorijsko pridobljenih migracijskih vrednosti
Plastics piping systems for the transport of water intended for human consumption -
Migration assessment - Guidance on the interpretation of laboratory derived migration
values
Kunststoff-Rohrleitungssysteme für den Transport von Wasser für den menschlichen
Verzehr - Bewertung der Migration - Anleitung für die Beurteilung von aus
Laborversuchen abgeleiteten Migrationswerten
Systemes de canalisations plastiques pour le transport d'eau destinée a la
consommation humaine - Evaluation de la migration - Guide d'interprétation des valeurs
de migration déterminées en laboratoire
Ta slovenski standard je istoveten z: ENV 852:2001
ICS:
13.060.20 Pitna voda Drinking water
23.040.20 Cevi iz polimernih materialov Plastics pipes
SIST ENV 852:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 852:2002

---------------------- Page: 2 ----------------------

SIST ENV 852:2002
EUROPEAN PRESTANDARD
ENV 852
PRÉNORME EUROPÉENNE
EUROPÄISCHE VORNORM
August 2001
ICS 67.250; 83.140.30
English version
Plastics piping systems for the transport of water intended for
human consumption - Migration assessment - Guidance on the
interpretation of laboratory derived migration values
Kunststoff-Rohrleitungssysteme für den Transport von
Wasser für den menschlichen Verzehr - Bewertung der
Migration - Anleitung für die Beurteilung von aus
Laborversuchen abgeleiteten Megrationswerten
This European Prestandard (ENV) was approved by CEN on 22 July 2001 as a prospective standard for provisional application.
The period of validity of this ENV is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the ENV can be converted into a European Standard.
CEN members are required to announce the existence of this ENV in the same way as for an EN and to make the ENV available promptly
at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the ENV) until the final
decision about the possible conversion of the ENV into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. ENV 852:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST ENV 852:2002
ENV 852:2001 (E)
Contents
page
Foreword 3
................................................................................................................................................
Introduction 4
............................................................................................................................................
1 Scope 5
...........................................................................................................................................
2 Normative references 5
..................................................................................................................
3 Definitions and symbols 5
.............................................................................................................
3.1 Definitions 5
......................................................................................................................................
3.2 Symbols 7
.........................................................................................................................................
4 Principle 7
.......................................................................................................................................
5 Field use 7
.......................................................................................................................................
5.1 General 7
..........................................................................................................................................
5.2 Factors 7
...........................................................................................................................................
5.3 Determination of the conversion factor, F, for pipes, fittings and joints 8
.........................................
6 Number of migration periods and assessment procedure 8
.....................................................
6.1 Number of migrations
...