EN 15016-2:2023
(Main)Railway applications - Technical documents - Part 2: Parts lists
Railway applications - Technical documents - Part 2: Parts lists
This document specifies the preparation and reproduction of design parts lists.
This document defines the basic principles and structure of design parts lists.
This document is applicable to all design parts lists for railway applications.
Bahnanwendungen - Technische Dokumente - Teil 2: Stücklisten
Dieses Dokument legt die Anfertigung und Reproduktion von Konstruktionsstücklisten fest.
Dieses Dokument bestimmt die grundlegenden Prinzipien und Struktur der Konstruktionsstücklisten.
Dieses Dokument ist anwendbar für alle Konstruktionsstücklisten für Bahnanwendungen.
Applications ferroviaires - Documents techniques - Partie 2 : Nomenclatures
Le présent document spécifie les exigences pour l'exécution et la reproduction des nomenclatures de conception pour les applications ferroviaires.
Le présent document spécifie la nomenclature de conception, et décrit les principes essentiels, leur structure et les exigences minimales que doit respecter une nomenclature de conception.
Le présent document s'applique pendant toute la durée de validité de la nomenclature. Il s'applique à toutes les organisations ferroviaires et à tous les partenaires concernés par les nomenclatures de conception, ainsi qu'aux fournisseurs qui rédigent des nomenclatures pour le compte d'usagers des réseaux de chemins de fer.
Železniške naprave - Tehnična dokumentacija - 2. del: Kosovnice
Ta dokument določa zahteve za pripravo in razmnoževanje konstrukcijskih kosovnic za železniške naprave.
Ta dokument določa konstrukcijsko kosovnico in opisuje osnovna načela, njihovo strukturo in minimalne zahteve za konstrukcijsko kosovnico.
Dokument se uporablja vso življenjsko dobo kosovnice. Ta dokument se uporablja za vse železniške organizacije in partnerje, ki se ukvarjajo s konstrukcijo kosovnico, ter za dobavitelje, ki pripravljajo kosovnico v imenu uporabnikov omrežja.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2023
Nadomešča:
SIST EN 15016-2:2004
SIST EN 15016-2:2004/AC:2007
Železniške naprave - Tehnična dokumentacija - 2. del: Kosovnice
Railway applications - Technical documents - Part 2: Parts lists
Bahnanwendungen - Technische Dokumente - Teil 2: Stücklisten
Applications ferroviaires - Documents techniques - Partie 2 : Nomenclatures
Ta slovenski standard je istoveten z: EN 15016-2:2023
ICS:
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
45.020 Železniška tehnika na Railway engineering in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 15016-2
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2023
EUROPÄISCHE NORM
ICS 01.100.01; 45.020 Supersedes EN 15016-2:2004
English Version
Railway applications - Technical documents - Part 2: Parts
lists
Applications ferroviaires - Documents techniques - Bahnanwendungen - Technische Dokumente - Teil 2:
Partie 2 : Nomenclatures Stücklisten
This European Standard was approved by CEN on 9 July 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15016-2:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Symbols and abbreviated terms . 6
5 Characteristic features of parts lists . 6
5.1 General . 6
5.2 Base . 7
5.3 Size . 7
5.4 Border . 7
5.5 Centring marks . 7
5.6 Characteristics of lines and entries . 7
5.6.1 Optical density . 7
5.6.2 Line wideness of separate parts lists . 7
5.6.3 Characteristics of lettering . 7
6 Specification . 8
6.1 Title block . 8
6.2 Copyright and exploitation right . 8
6.3 Intellectual property . 8
6.4 Columns and lines . 8
6.5 Data fields . 9
6.5.1 General . 9
6.5.2 Entries in the part list . 9
6.5.3 Position number . 10
6.5.4 Quantity, number of pieces . 10
6.5.5 Unit . 10
6.5.6 Title, designation, name . 10
6.5.7 Item identification, standard code designation, item type. 10
6.5.8 Material, technical data . 11
6.5.9 Mass/unit . 11
6.5.10 Remark . 11
7 Entry rules . 11
Annex A (normative) Title block . 14
A.1 Presentation . 14
A.2 Contents . 14
A.3 Description of title block fields . 16
Annex B (normative) General layout . 20
Annex C (informative) Example of a parts list . 22
Annex D (informative) Legacy entry rules of EN15016-2:2004 . 24
Bibliography . 26
European foreword
This document (EN 15016-2:2023) has been prepared by Technical Committee CEN/TC 256 “Railway
applications”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2024, and conflicting national standards shall be withdrawn
at the latest by February 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 15016-2:2004.
In comparison with the previous edition, the following technical modifications have been made:
— The references to standards, the clause “Terms and definitions” have been updated.
— The clause “Symbols and abbreviated terms” have been added.
— Microcopying has been deleted.
— In Table 3 “Entry rules” the case “Software” has been added.
— In Table 2 “Data fields” and Annex A references to the Data Model of Part 4 have been incorporated to show
the relation between the data fields of the parts lists respectively the fields of the title blocks of technical
documents and the data fields for data exchange.
This document is part of the standard series “Railway applications — Technical documents” which consists of
the following parts:
— EN 15016-1: General principles;
— EN 15016-2: Parts lists;
— EN 15016-3: Handling of modifications of technical documents;
— EN 15016-4: Data exchange.
This document has been prepared under a Standardization Request given to CEN by the European Commission
and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national standards body. A
complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania,
Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United Kingdom.
Introduction
In railway business, the customer very often requires, as part of a contract, technical documents in a certain
form. In order to support co-operation and effective exchange of information between customers, suppliers and
partners, it is necessary to have the document requirements precisely defined.
This document refers to EN, ISO or IEC standards dealing with parts lists. In cases where ISO or IEC standards
are not sufficiently precise, this standard gives specific details. These additions to ISO and IEC standards
facilitate the exploitation and the administration of the parts lists.
These additions have been drawn up to accommodate:
— the large variety of users;
— ease of transfer of documents;
— any specific series of documentation related to the railway material they define.
Special consideration has been given to those producing drawings by computer and their reproduction without
loss of quality.
1 Scope
This document specifies the preparation and reproduction of design parts.
This document defines the basic principles and structure of design parts lists.
This document is applicable to all design parts lists for railway applications.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references, the
latest edition of the referenced document (including any amendments) applies.
EN 15016-1, Technical drawings - Railway applications - Part 1: General Principles
EN 17343:2020, Railway applications - General terms and definitions
EN 61355-1, Classification and designation of documents for plants, systems and equipment - Part 1: Rules and
classification tables
EN ISO 216:2007, Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and
indication of machine direction (ISO 216:2007)
EN ISO 10209:2022, Technical product documentation - Vocabulary - Terms relating to technical drawings,
product definition and related documentation (ISO 10209:2022)
ISO 639-1, Codes for the representation of names of languages — Part 1: Alpha-2 code
ISO 80000-1, Quantities and units — Part 1: General
ISO 4882, Office machines and data processin
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.