Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers

This part of the EN 13230 series defines technical criteria and control procedures for manufacturing and testing twin-block reinforced concrete sleepers.

Bahnanwendungen - Oberbau - Gleis- und Weichenschwellen aus Beton - Teil 3: Bewehrte Zweiblockschwellen

Dieser Teil der Normenreihe EN 13230 legt die technischen Kriterien und Kontrollverfahren für die Herstellung und Prüfung von bewehrten Zweiblockschwellen fest.

Applications ferroviaires - Voie - Traverses et supports en béton - Partie 3 : Traverses biblocs en béton armé

La présente partie de la série EN 13230 définit les prescriptions spécifiques relatives aux traverses biblocs en béton armé.
Ces prescriptions s'ajoutent à celles de  l'EN 13230 1:2016 et sont nécessaires pour disposer d'une norme complète traitant des traverses biblocs en béton armé.
Le document spécifie les montages d’essais et procédures d’essai à mettre en œuvre ainsi que les critères d’acceptation comme les essais de qualification.
Il spécifie également les caractéristiques de l’entretoise en acier et les critères de conception pour mettre en œuvre l’entretoise dans les traverses biblocs en béton armé.

Železniške naprave - Zgornji ustroj proge - Betonski pragi in kretniški betonski pragi - 3. del: Dvodelni armiranobetonski pragi

Ta del standarda EN 13230 določa tehnične kriterije in kontrolne postopke za proizvodnjo in preskušanje dvodelnih armiranobetonskih pragov.

General Information

Status
Published
Publication Date
10-May-2016
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Dec-2021

Relations

Buy Standard

Standard
EN 13230-3:2016
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13230-3:2016
01-julij-2016
1DGRPHãþD
SIST EN 13230-3:2009
Železniške naprave - Zgornji ustroj proge - Betonski pragi in kretniški betonski
pragi - 3. del: Dvodelni armiranobetonski pragi
Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block
reinforced sleepers
Bahnanwendungen - Oberbau - Gleis- und Weichenschwellen aus Beton - Teil 3:
Bewehrte Zweiblockschwellen
Applications ferroviaires - Voie - Traverses et supports en béton - Partie 3 : Traverses
biblocs en béton armé
Ta slovenski standard je istoveten z: EN 13230-3:2016
ICS:
45.080 7UDþQLFHLQåHOH]QLãNLGHOL Rails and railway
components
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 13230-3:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13230-3:2016

---------------------- Page: 2 ----------------------

SIST EN 13230-3:2016


EN 13230-3
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2016
EUROPÄISCHE NORM
ICS 91.100.30; 93.100 Supersedes EN 13230-3:2009
English Version

Railway applications - Track - Concrete sleepers and
bearers - Part 3: Twin-block reinforced sleepers
Applications ferroviaires - Voie - Traverses et supports Bahnanwendungen - Oberbau - Gleis- und
en béton - Partie 3 : Traverses biblocs en béton armé Weichenschwellen aus Beton - Teil 3: Bewehrte
Zweiblockschwellen
This European Standard was approved by CEN on 4 March 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13230-3:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13230-3:2016
EN 13230-3:2016 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and symbols . 6
3.1 Terms and definitions . 6
3.2 Symbols . 7
4 Product testing . 8
4.1 Test arrangements . 8
4.1.1 General . 8
4.1.2 Rail seat section . 8
4.2 Test procedures .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.