EN ISO 3861:1997

Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995)

Migrated from Progress Sheet (TC Comment) (2000-07-10): CEN/TC 218 cann't confirm target dates because item is dependant on ++ ISO work ++ New edition of ISO 3861 to be circulated PQ/UAP ++ ISO document. Target date estimated for stage 21 is 1994-08.

Gummischläuche zum Sandstrahlen - Anforderung (ISO 3861:1995)

Diese Internationale Norm legt die Anforderungen an Gummischläuche zum Strahlenmit nassem und trockenem Sand und Kies fest, die für den Einsatz bis zu einem maximalen Betriebsdruck von 0,63 MPa geeignet sind.

Tuyaux en caoutchouc pour sablage et grenaillage - Spécifications (ISO 3861:1995)

Gumene cevi za peskanje - Specifikacija (ISO 3861:1995)

General Information

• Status: Withdrawn
• Publication Date: 20-May-1997
• Withdrawal Date: 25-Nov-2008
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218/WG 3 - Rubber and plastics hoses, hose assemblies and tubing for other applications
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 26-Nov-2008
• Completion Date: 26-Nov-2008
• Ref Project: SIST EN ISO 3861:2000 - Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995)

Relations

• Replaced By: EN ISO 3861:2008 - Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gumene cevi za peskanje - Specifikacija (ISO 3861:1995)Gummischläuche zum Sandstrahlen - Anforderung (ISO 3861:1995)Tuyaux en caoutchouc pour sablage et grenaillage - Spécifications (ISO 3861:1995)Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995)83.140.40Gumene ceviHosesICS:Ta slovenski standard je istoveten z:EN ISO 3861:1997SIST EN ISO 3861:2000en01-december-2000SIST EN ISO 3861:2000SLOVENSKI
STANDARD



SIST EN ISO 3861:2000



SIST EN ISO 3861:2000



SIST EN ISO 3861:2000



SIST EN ISO 3861:2000



SIST EN ISO 3861:2000



INTERNATIONAL STANDARD ISO 3861 Second edition 1995-08-01 Rubber hoses for sand and grit blasting - Specification Tuyaux en caoutchouc pour sablage et grenaillage - Spkcifications Reference number ISO 3861 :1995(E) SIST EN ISO 3861:2000



ISO 3861:1995(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (1 EC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 3861 was prepared by Technical Committee lSO/TC 45, Rubber and rubber products, Subcommittee SC 1, Hoses (rubber and plastics). This second edition cancels and replaces the first edition (ISO 3861:1977), which has been technically revised. The major changes compared with the 1977 edition are as follows: a) the title and scope have been expanded to include sand-blasting as weil as grit-blasting; b) additional bore sizes have been added and changes made to the tol- erance of the 20 mm and 40 mm bore sizes; c) the thickness of the cover has been specified as an additional re- quirement; d) the value for the elongation at break of the lining has been reduced from 500 % to 400 %, the tensile strength of the cover has been re- duced from 12 MPa to 10 MPa, and an abrasion resistance test for the lining has been added; e) testing of physical properties is carried out on test sheets; f) an ozone resistance requirement has been added; 0 ISO 1995 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-l 211 Geneve 20 l Switzerland Printed in Switzerland ii SIST EN ISO 3861:2000



0 ISO ISO 3861:1995(E) g) the test for electrical properties is now in accordance with ISO 8031 and an alternative method for the dissipation of static electricity is in- cluded; h) a marking clause has been added. . . . Ill SIST EN ISO 3861:2000



This page intentionally left blank SIST EN ISO 3861:2000



INTERNATIONAL STANDARD 0 ISO ISO 3861:1995(E) Rubber hoses for sand and grit blasting - Specification 1 Scope This International Standard specifies the requirements for rubber hoses for wet and dry sand and grit blast- ing, suitable for use up to a maximum working pres- Sure of 0,63 MPa. 2 Normative references The following Standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publi- cation, the editions indicated were valid. All Standards are subject to revision, and Parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most re- cent editions of the Standards indicated below. Members of IEC and ISO maintain registers of cur- rently valid International Standards. ISO 37: 1994, Rubber, vulcanized or thermoplastic - Determination of tensile s tress-s train proper-Ges. I SO 188: 1982, Rubber, vulcanized - Accelera ted ageing or hea t-resis tance tes ts. ISO 1307:1992, Rubber and plastics hoses for general-purpose indus trial applica tions - Bore diam- eters and tolerantes
...