iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10277-3:2008

(Main)

Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels

Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels

This part of EN 10277 applies to bright steel bars in the drawn, turned or ground condition, in straight lengths of free-cutting steels.
This EN 10277-3 is complemented by EN 10277-1.

Blankstahlerzeugnisse - Technische Lieferbedingungen - Teil 3: Automatenstähle

Dieser Teil der EN 10277 gilt für gerichteten und abgelängten Blankstahl im gezogenen, geschälten oder
geschliffenen Zustand aus Automatenstählen.
Diese EN 10277-3 wird vervollständigt durch EN 10277-1.

Produits en acier transformés à froid - Conditions techniques de livraison - Partie 3: Aciers de décolletage

La présente partie de l’EN 10277 s’applique aux barres en acier de décolletage, transformées à froid, à l’état étiré, écroûté galeté ou rectifié, en longueurs droites.
La présente norme EN 10277-3 est complétée par l’EN 10277-1.

Svetli jekleni izdelki - Tehnični dobavni pogoji - 3. del: Avtomatna jekla

General Information

Status
Withdrawn
Publication Date
11-Mar-2008
Withdrawal Date
19-Jun-2018
ICS
77.140.10 - Heat-treatable steels
77.140.60 - Steel bars and rods
Technical Committee
ECISS/TC 105 - Steels for heat treatment, alloy steels, free-cutting steels and stainless steels
Drafting Committee
ECISS/TC 105 - Steels for heat treatment, alloy steels, free-cutting steels and stainless steels
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
20-Jun-2018
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 10277-3:2008 - Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels

Relations

Replaces
EN 10277-3:1999 - Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels
Effective Date
22-Dec-2008
Replaced By
EN 10277:2018 - Bright steel products - Technical delivery conditions
Effective Date
27-Jun-2018

Buy Standard

EN 10277-3:2008EN 10277-3:2008
PreviousNext
Standard
EN 10277-3:2008
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Blankstahlerzeugnisse - Technische Lieferbedingungen - Teil 3: AutomatenstähleProduits en acier transformés à froid - Conditions techniques de livraison - Partie 3: Aciers de décolletageBright steel products - Technical delivery conditions - Part 3: Free-cutting steels77.140.01Železni in jekleni izdelki na splošnoIron and steel products in generalICS:Ta slovenski standard je istoveten z:EN 10277-3:2008SIST EN 10277-3:2008en,fr,de01-maj-2008SIST EN 10277-3:2008SLOVENSKI
STANDARDSIST EN 10277-3:20001DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10277-3March 2008ICS 77.140.10; 77.140.60Supersedes EN 10277-3:1999
English VersionBright steel products - Technical delivery conditions - Part 3:Free-cutting steelsProduits en acier transformés à froid - Conditionstechniques de livraison - Partie 3: Aciers de décolletageBlankstahlerzeugnisse - Technische Lieferbedingungen -Teil 3: AutomatenstähleThis European Standard was approved by CEN on 4 February 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10277-3:2008: ESIST EN 10277-3:2008

Furthermore for this part the tensile strength values of 36SMn(PB)14 and 38SMn(Pb)28 in condition +C and for 35S(Pb)20 in condition +QT+C were amended in the table for mechanical properties for steels for quenching and tempering.
4.2 Designation See EN 10277-1. 5 Information to be supplied by the purchaser See EN 10277-1. 6 Manufacturing process See EN 10277-1. 7 Requirements 7.1 Chemical composition 7.1.1 Cast analysis The chemical composition of the steel acc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 683-7:2024(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 7: Bright products of non-alloy and alloy steels (ISO 683-7:2023)
SIST EN ISO 683-7:2024

This document specifies the technical delivery requirements for bright steel products in the drawn, peeled/turned or additional ground condition and they are intended for mechanical purposes, for example for machine parts. The bright steel products are subdivided into the following steel types:
a)       non-alloy general engineering steels;
b)       non-alloy free-cutting steels;
c)        non-alloy and alloy case-hardening steels;
d)       non-alloy and alloy steels for quenching and tempering.
Bright products of stainless steels are not part of this document, they are covered by ISO 16143-4.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9443:2018(Main)
Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018)
SIST EN ISO 9443:2018

This document specifies technical delivery requirements for the surface quality of round bars, squares, hexagons and wire rod in the hot rolled condition with nominal dimensions dN from 5 mm to 200 mm. This document is applicable to bright products and tool steels, if agreed at the time of enquiry and order between manufacturer and purchaser.
By agreement between manufacturer and purchaser, this document can also be applied to other special profiles.
This document is particularly applicable to steels for engineering and structural applications.
This document does not include any requirements for the permissible depth of surface decarburization.
NOTE       The determination of depth of surface decarburization is presented in ISO 3887.
The material standards for steel bars and wire rod can exclude the application of one or other of the surface quality classes of this document. They can also cover requirements for surface quality which deviate from this document. In these cases the requirements of the material standard prevail.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-7:2024(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 7: Bright products of non-alloy and alloy steels (ISO 683-7:2023)
SIST EN ISO 683-7:2024

This document specifies the technical delivery requirements for bright steel products in the drawn, peeled/turned or additional ground condition and they are intended for mechanical purposes, for example for machine parts. The bright steel products are subdivided into the following steel types:
a)       non-alloy general engineering steels;
b)       non-alloy free-cutting steels;
c)        non-alloy and alloy case-hardening steels;
d)       non-alloy and alloy steels for quenching and tempering.
Bright products of stainless steels are not part of this document, they are covered by ISO 16143-4.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9443:2018(Main)
Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018)
SIST EN ISO 9443:2018

This document specifies technical delivery requirements for the surface quality of round bars, squares, hexagons and wire rod in the hot rolled condition with nominal dimensions dN from 5 mm to 200 mm. This document is applicable to bright products and tool steels, if agreed at the time of enquiry and order between manufacturer and purchaser.
By agreement between manufacturer and purchaser, this document can also be applied to other special profiles.
This document is particularly applicable to steels for engineering and structural applications.
This document does not include any requirements for the permissible depth of surface decarburization.
NOTE       The determination of depth of surface decarburization is presented in ISO 3887.
The material standards for steel bars and wire rod can exclude the application of one or other of the surface quality classes of this document. They can also cover requirements for surface quality which deviate from this document. In these cases the requirements of the material standard prevail.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17677:2024(Main)
Food processing machinery - Craft bakery and pastry depositors - Safety and hygiene requirements
kSIST FprEN 17677:2024

1.1 This document specifies safety and hygiene requirements for the design and manufacture of craft bakery and pastry depositors as described in the normative Annex A and which:
a)   are intended to be:
-   only for professional use;
-   used by one operator at a time;
-   used to deposit only pasty food (i.e.: cream, dough, batter, etc.);
-   used to deposit only on trays;
-   used as standalone machines;
-   used with manual loading of the dough into the hopper;
-   used with manual loading and unloading of the tray/s on/from the tray conveyor.
b)   can carry out only the following movements and relevant directions (see Figure 1a)):
-   Z: vertical movement of the table and/or the deposit unit;
-   X: horizontal movement of the tray conveyor;
-   Y: possible horizontal component of the movement only of the spouts themselves inside the deposit unit;
c)   are fitted with one or more hoppers whose capacity is ≤ 60 dm3 each;
d)   have a total length of the tray conveyor ≤ 1 600 mm;
e)   have a vertical movement between spouts and tray conveyor (H) ≤ 200 mm (see Figure 1c));
f)   have a deposit performance (see 3.5):
-   ≤ 60 cycles/minute with up/down movement of the table or the deposit unit;
-   ≤ 100 cycles/minute without up/down movement of the table or the deposit unit;
g)   have a trays performance (see 3.6) ≤ 4 trays/minute.
This document deals with all significant hazards, hazardous situations and events relevant to adjustment, operation and cleaning of craft bakery and pastry depositors, when they are used as intended or under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document covers requirements for the safe operation of the machine, including loading, depositing, unloading and cleaning.
1.2 The following hazards are not covered by this document:
-   hazards arising from the use of an automatic hopper loading system;
-   hazards due to packaging, handling or transport;
-   hazards arising from electromagnetic compatibility issues;
-   hazards due to dismantling and disassembling;
-   hazards due to operational stop;
-   hazards due to selection of control or operating modes;
-   hazards due to failure of the power supply;
-   hazards due to surfaces, edges or angles;
-   hazards due to uncontrolled movements;
-   hazards due to machinery maintenance.
This standard does not deal with any specific requirements on noise emitted from craft bakery and pastry depositor as the generated noise does not cause a relevant hazard.
The significant hazards covered by this document are described in Annex B.
1.3 The following machines are excluded from the scope of this document:
a)   machines which deposit pasty food by means of needles (injection);
b)   machines where the trays are put onto and/or removed from the tray conveyor automatically;
c)   machines which require a blade for the cutting system;
d)   domestic appliances;
e)   machines for industrial production;
f)   machines to deposit other products than food for bakery and pastry products.
1.4 This document is not applicable to machines which are manufactured before the date of publication of this European Standard.

  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17137:2024(Main)
Textiles and textile products - Determination of the content of compounds based on chlorobenzenes and chlorotoluenes
kSIST FprEN 17137:2024

This document specifies a test method using gas chromatography with mass selective detector (GC-MS) for detection and quantification of chlorobenzenes, chlorotoluenes, and α-chlorinated toluenes in fibres, yarns, fabrics, coated fabrics and plastics.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17948:2024(Main)
Maintenance management and functions
kSIST FprEN 17948:2024

This document specifies the main content of maintenance management and the main activities for which maintenance management is responsible.
This document is applicable to maintenance managers and asset managers in the industry sector and for infrastructure and buildings in order to achieve the success factors of the organization.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 556-2:2024(Main)
Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 2: Requirements for aseptically processed medical devices
kSIST FprEN 556-2:2024

This document specifies the requirements for an aseptically processed medical device to be designated “STERILE”.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/CLC/TR 18115:2024(Main)
Data governance and quality for AI within the European context
kSIST-TP FprCEN/CLC/TR 18115:2024

This document provides an overview on AI-related standards, with a focus on data and data life cycles, to organizations, agencies, enterprises, developers, universities, researchers, focus groups, users, and other stakeholders that are experiencing this era of digital transformation.
It describes links among the many international standards and regulations published or under development, with the aim of promoting a common language, a greater culture of quality, giving an information framework.
It addresses the following areas:
-   data governance;
-   data quality;
-   elements for data, data sets properties to provide unbiased evaluation and information for testing.

  • Draft
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17992:2024(Main)
Food authenticity - Determination of the sum of 16-O-Methylcafestol, 16-O-Methylkahweol and their derivatives in roasted coffee by ¹H-qNMR
kSIST FprEN 17992:2024

This document specifies a method for the determination of soluble 16-O-Methylcafestol and 16-O-Methylkahweol content (the sum of free forms and derivatives, e.g. fatty acid esters, henceforth abbreviated as 16-OMD = “diterpenes”) in roasted coffee (beans or ground), using quantitative proton nuclear magnetic resonance spectroscopy (1H-qNMR).
If complying with the experimental parameters described below, this test procedure has been proven for the following mass fraction range:
w16-OMD:    20 mg/kg to 2 000 mg/kg.
The mass fraction range can be expanded by suitable changes of the experimental parameters, e.g. a different weighed portion of ground coffee or the accumulation of more NMR-transients.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day