FprEN IEC 61340-4-9:2024
(Main)Electrostatics - Part 4-9: Standard test methods for specific applications - Garments - Resistive characterization
Electrostatics - Part 4-9: Standard test methods for specific applications - Garments - Resistive characterization
This part of IEC 61340 provides test methods for measuring the electrical resistance of garments used for static control applications. These test methods can be used for evaluating outer garments that are homogenously conductive or homogeneously dissipative, or that utilize surface conductive or surface dissipative components or elements. NOTE The test methods defined in this standard might not be able to measure materials with buried conductive layers. The resistance point-to-point test method tests the electrical resistance between the two sleeves, any two panels or any two or more electrically interconnected components of the static control garment, including the electrical resistance across the seams and cuffs of the garment as applicable. An alternate sleeve-to-sleeve test method is allowed, using clamps to hang a garment. Static control garments that electrically bond to the wearer and provide a path to ground from the wearer are evaluated using the resistance point-to-point test method, the resistance point to groundable point test method, as well as a system test to determine the resistance from the person through the garment to the groundable point of the garment system. A band resistance measurement test is provided in IEC 61340-4-6 which can be used for garments so equipped with cuffs that are intended to perform the same function as a wrist strap band. The system test with a person wearing a groundable static control garment system includes the ground cord that connects to the groundable point of the garment.
Elektrostatik - Teil 4-9: Standard-Prüfverfahren für spezielle Anwendungen - Kleidung - Resistive Charakterisierung
Électrostatique - Partie 4-9: Méthodes d'essai normalisées pour des applications spécifiques - Vêtements - Caractéristiques résistives
L'IEC 61340-4-9:2024 fournit des méthodes d'essai pour mesurer la résistance électrique des vêtements utilisés pour des applications de contrôle des DES. Ces méthodes d'essai peuvent être utilisées pour évaluer des vêtements extérieurs conducteurs de façon homogène ou dissipatifs de façon homogène, ou qui comportent des composants ou des éléments à surface conductrice ou dissipative. NOTE Il est possible que les méthodes d'essai spécifiées dans le présent document ne permettent pas le mesurage des matériaux à couches conductrices enfouies. Cette troisième édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) l'IEC 61010-1 et l'IEC 61010-2-030 ont été ajoutées comme exigences pour les appareils de mesure; b) la plage de tensions d'essai pour le chemin de mise à la terre du personnel est passée de "7 V à 30 V en courant continu" à "7 V à 100 V en courant continu"; c) les exigences de nettoyage sont passées de cinq cycles de nettoyage au minimum à trois cycles de nettoyage au minimum; d) les exigences concernant l'humidité modérée ont été supprimées; e) les figures ont été remplacées par des dessins génériques.
Elektrostatika - 4-9. del: Standardne preskusne metode za posebno uporabo - Oblačila - Uporovne značilnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61340-4-9:2022
01-februar-2022
Elektrostatika - 4-9. del: Standardne preskusne metode za posebno uporabo -
Oblačila - Uporovne značilnosti
Electrostatics - Part 4-9: Standard test methods for specific applications - Garments -
Resistive Characterization
Électrostatique - Partie 4-9: Méthodes d'essai normalisées pour des applications
spécifiques - Vêtements - Caractéristiques résistives
Ta slovenski standard je istoveten z: prEN IEC 61340-4-9:2021
ICS:
13.340.10 Varovalna obleka Protective clothing
17.220.99 Drugi standardi v zvezi z Other standards related to
elektriko in magnetizmom electricity and magnetism
oSIST prEN IEC 61340-4-9:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN IEC 61340-4-9:2022
oSIST prEN IEC 61340-4-9:2022
101/643/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61340-4-9 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2021-12-10 2022-03-04
SUPERSEDES DOCUMENTS:
101/626/CD, 101/636A/CC
IEC TC 101 : ELECTROSTATICS
SECRETARIAT: SECRETARY:
Germany Mr Hartmut Berndt
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
TITLE:
Electrostatics - Part 4-9: Standard test methods for specific applications - Garments - Resistive
Characterization
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
The text "Resistive Characterization" has been added to the project title (see 101/636A/CC).
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
oSIST prEN IEC 61340-4-9:2022
IEC 61340-4-9:2016 © IEC 2016 – 2 – 101/643/CDV
1 CONTENTS
3 FOREWORD . 4
4 INTRODUCTION . 6
5 1 Scope . 7
6 2 Normative references . 7
7 3 Terms and definitions . 8
8 4 Atmosphere for conditioning and testing . 8
9 5 Equipment and materials . 9
10 5.1 Resistance measurement apparatus . 9
11 5.1.1 General . 9
12 5.1.2 Product qualification . 9
13 5.1.3 Acceptance testing . 9
14 5.1.4 Ohmmeter for testing personal ground path . 9
15 5.2 Resistance measurement electrodes . 9
16 5.2.1 Cylindrical electrodes . 9
17 5.2.2 Clamps/electrodes . 9
18 5.2.3 Cuff test fixture . 10
19 5.2.4 Hand-held electrode . 10
20 5.3 Support surface . 10
21 5.3.1 Insulative support surface . 10
22 5.3.2 Insulative sleeve inserts . 10
23 5.3.3 Insulative hangers . 10
24 6 Test procedure . 10
25 6.1 Sample preparation . 10
26 6.1.1 General . 10
27 6.1.2 Number of samples . 10
28 6.2 Humidity requirements . 10
29 6.3 Test procedures . 11
30 6.3.1 General . 11
31 6.3.2 Resistance point-to-point . 11
32 6.3.3 Resistance point-to-groundable point . 12
33 6.3.4 Cuff measurements . 12
34 6.3.5 Groundable static control garment system . 12
35 7 Product qualification . 12
36 8 Reporting. 13
37 Annex A (informative) Garment types and resistance values . 20
38 Annex B (informative) Data collection sheet (example) . 21
39 Bibliography . 23
41 Figure 1 – Test set-up – Resistance point-to-point (sleeve-to-sleeve procedure with
42 insulative sleeve inserts) . 14
43 Figure 2 – Test set-up – Resistance point-to-point (insulative sleeve inserted into
44 sleeve detail) . 14
45 Figure 3 – Test set-up – Resistance point-to-point (panel-to-panel procedure with
46 insulative support surface) . 14
oSIST prEN IEC 61340-4-9:2022
IEC 61340-4-9:2016 © IEC 2016 – 3 – 101/643/CDV
47 Figure 4 – Test set-up – Resistance point-to-point (cuff-to-cuff procedure with
48 insulative sleeve inserts) . 15
49 Figure 5 – Test set-up – Resistance point-to-point (electrode inserted into cuff detail) . 15
50 Figure 6 – Test set-up – Resistance point-to-point (hanging clamp sleeve-to-sleeve
51 procedure) . 16
52 Figure 7 – Clamps/electrodes for hanging garment test. 16
53 Figure 8 – Test set-up – Resistance point-to-groundable point (cuff-to-groundable-
54 point procedure with insulative sleeve inserts) . 17
55 Figure 9 – Test set-up – Resistance point-to-groundable point (sleeve-to-groundable-
56 point procedure with insulative sleeve inserts) . 17
57 Figure 10 – Groundable garment cuff test . 18
58 Figure 11 – Test set-up – Groundable static control garment system resistance
59 (groundable garment in combination with a person using a meter and hand-held
60 electrode) . 18
61 Figure 12 – Test set-up – Groundable static control garment system resistance
62 (groundable garment in combination with a person using an integrated tester) . 19
64 Table 1 – Product qualification . 13
65 Table A.1 – Garment types and resistance values . 20
oSIST prEN IEC 61340-4-9:2022
IEC 61340-4-9:2016 © IEC 2016 – 4 – 101/643/CDV
68 INTERNATIONAL ELECTROTECHNICAL COMMISSION
69 ____________
71 ELECTROSTATICS –
73 Part 4-9: Standard test methods for
74 specific applications – Garments – Resistive Characterization
76 FOREWORD
77 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
78 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
79 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
80 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
81 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
82 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
83 in the subject dealt with may participate in this preparatory work. International, governmental and non-
84 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
85 with the International Organization for Standardization (ISO) in accordance with conditions determined by
86 agreement between the two organizations.
87 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
88 consensus of opinion on the relevant subjects since each technical committee has representation from all
89 interested IEC National Committees.
90 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
91 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
92 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
93 misinterpretation by any end user.
94 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
95 transparently to the maximum extent possible in their national and regional publications. Any divergence
96 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
97 the latter.
98 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
99 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
100 services carried out by independent certification bodies.
101 6) All users should ensure that they have the latest edition of this publication.
102 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
103 members of its technical committees and IEC National Committees for any personal injury, property damage or
104 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
105 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
106 Publications.
107 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
108 indispensable for the correct application of this publication.
109 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
110 patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
111 International Standard IEC 61340-4-9 has been prepared by IEC technical committee 101:
112 Electrostatics.
113 This third edition cancels and replaces the second edition published in 2010. This edition
114 constitutes a technical revision.
115 This edition includes the following significant technical changes with respect to the previous
116 edition:
117 a) IEC 61010-1 and IEC 61010-2-030 were added as requirements for measurement
118 equipment
119 b) Testing voltage for personal ground path changed from 7 V DC to 30 V DC to 7 V DC to
120 100 V DC
121 c) Cleaning requirements changed from a minimum of 5 cycles of cleaning to a minimum of 3
122 cycles of cleaning.
oSIST prEN IEC 61340-4-9:2022
IEC 61340-4-9:2016 © IEC 2016 – 5 – 101/643/CDV
123 d) Moderate humidity requirements deleted
124 e) Figures were r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.