Interoperability specifications and communication method for external power supplies used with computing and consumer electronics devices

This International Standard defines common charging interoperability guidelines for power sources (external power supplies (EPS) and other Sources) used with computing and consumer electronics devices that implement the IEC 62680-1-3: USB Type-C®1 Cable and Connector Specification. This document defines normative requirements for an EPS to ensure interoperability, in particular it specifies the data communicated from a power source to a device (Figure 1) and certain safety elements of the EPS, cable, and device. While the requirements focus of this document is on the EPS (External Power Supply) and the behavior at its USB Type-C connector interface, it is also important to comprehend cable assembly and device capabilities and behaviors in order to assure end-to-end charging interoperability. The scope does not apply to all design aspects of an EPS. An EPS compliant with this standard is also expected to follow other applicable global standards and regulatory compliance requirements for aspects such as product safety, EMC and energy efficiency. [Figure 1] This International Standard provides recommendations for the behavior of a device when used with a power source compliant with this document. This International Standard specifies the minimum hardware specification for an EPS implementing IEC 62680-1-3: USB Type-C. This document also specifies the data objects used by a charging system utilizing IEC 62680-1-2: USB Power Delivery Specification to understand the identity, design and performance characteristics, and operating status of an external power supply. IEC 62680-1-2 and IEC 62680-1-3 focus on power delivery applications ranging to 100W for a variety of computing and consumer electronic devices including notebook computers, tablets, smartphones, small form-factor desktops, monitor displays and other related multimedia devices. Future updates to IEC 62680-1-2 and IEC 62680-1-3 specifications will extend to enable power delivery applications that require more than 100W while remaining within the technical limitations of the USB Type-C cable and connector solution. This document relies on established mechanical and electrical specifications, and communication protocols specified by IEC 62680-1-2 and IEC 62680-1-3. These specifications support methods for establishing the best performing interoperability between untested combinations of EPS and devices with the aim of improving consumer satisfaction. Information describing the USB charging interoperability model, overview of USB Type-C and USB Power Delivery specifications, and factors for charging performance are also provided to support implementation of this standard.

Interoperabilitäts-Spezifikationen und Kommunikationsverfahren für externe Stromversorgungen zur Anwendung für Computer- und Unterhaltungselektronikgeräte

Spécifications d'interopérabilité et méthode de communication pour les alimentations externes utilisées avec les dispositifs informatiques et les dispositifs électroniques grand public (TA 18)

L'IEC 63002:2021 définit des lignes directrices pour l'interopérabilité de la charge commune des sources d'alimentation (alimentations externes [EPS] et autres Sources) utilisées avec les dispositifs informatiques et les dispositifs électroniques grand public qui mettent en œuvre l'IEC 62680-1-3 (spécification des câbles et connecteurs USB Type-C). Le présent document définit les exigences normatives des EPS en matière d'interopérabilité; il spécifie notamment les données communiquées par une source d'alimentation à un dispositif (voir Figure 1) et certains éléments de sécurité de l'EPS, du câble et du dispositif. Alors que les exigences définies dans le présent document concernent l'EPS et le comportement au niveau de l'interface de son connecteur USB Type-C, il est également important de comprendre les capacités et le comportement des ensembles de câbles et des dispositifs afin d'assurer une interopérabilité de bout en bout de la charge. Le présent document ne couvre pas tous les aspects de conception d'une EPS. Le présent document ne définit pas les exigences de conformité réglementaire pour des aspects tels que la sécurité des produits, la comptabilité électromagnétique (CEM) ou l'efficacité énergétique. Le présent document fournit des recommandations pour le comportement d'un dispositif lorsqu'il est utilisé avec une source d'alimentation conforme au présent document. Il spécifie les caractéristiques matérielles minimales exigées pour une EPS qui met en œuvre l'IEC 62680-1-3. Le présent document spécifie également les objets de données utilisés par un système de charge conforme à l'IEC 62680-1-2 pour comprendre les caractéristiques d'identité, de conception et de performance, ainsi que l'état de fonctionnement d'une alimentation externe. L'IEC 62680-1-2 se concentre sur les applications d'alimentation jusqu'à 100 W pour une large gamme de dispositifs informatiques et de dispositifs électroniques grand public, notamment les ordinateurs portables, les tablettes, les mobiles multifonctions, les ordinateurs de bureau compacts, les moniteurs et d'autres dispositifs multimédias analogues. Le présent document s'appuie sur les spécifications mécaniques et électriques établies, ainsi que sur les protocoles de communication spécifiés dans l'IEC 62680-1-2 et l'IEC 62680-1-3. Ces spécifications décrivent les méthodes qui visent à optimiser l'interopérabilité entre les combinaisons EPS-dispositif qui n'ont pas été soumises à l'essai dans le but d'améliorer la satisfaction du client. Le présent document décrit également le modèle d'interopérabilité de la charge USB, la spécification USB Type-C et la spécification de l'alimentation électrique par port USB, ainsi que les facteurs de rendement de charge nécessaires aux fins de mise en œuvre. L'IEC 63002:2021 annule et remplace la première édition parue en 2016. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) la présente norme a été renommée (anciennement intitulée Méthode d'identification et d'interopérabilité des communications des alimentations externes utilisées avec les dispositifs informatiques portatifs); b) le nouvel Article 4 traite de l'Interopérabilité de l'EPS avec les technologies USB; c) l'Article 5, Spécification EPS, fournit des exigences relatives au matériel et à la protection; la protection à maximum de tension n'est plus facul

Specifikacije in komunikacijske metode medobratovalnosti zunanjih napajalnikov, ki se uporabljajo pri računalniških in potrošniških elektronskih napravah (IEC 63002:2021)

Ta mednarodni standard določa splošne smernice glede medobratovalnosti za polnjenje za vire napajanja (zunanje napajalnike (EPS) in druge vire napajanja), ki se uporabljajo pri računalniških in potrošniških elektronskih napravah v skladu s standardom IEC 62680-1-3: Specifikacija za kable in priključke univerzalnega serijskega vodila tipa C®.
Ta dokument določa normativne zahteve za zunanji napajalnik za namene zagotavljanja medobratovalnosti; določa zlasti podatke, posredovane iz vira napajanja v napravo (slika 1) ter določene varnostne elemente zunanjega napajalnika, kabla in naprave. Čeprav se zahteve v tem dokumentu osredotočajo na zunanji napajalnik in delovanje v njegovem vmesniku priključka USB tipa C, je pomembno razumeti tudi zmogljivosti ter delovanje kabelskih sklopov in naprav, da se zagotovi medobratovalnost za polnjenje od začetka do konca. Področje uporabe se ne uporablja za vse vidike zasnove zunanjega napajalnika. Pričakuje se, da zunanji napajalnik, skladen s tem standardom, izpolnjuje tudi določila ustreznih globalnih standardov in zahteve glede skladnosti s predpisi za vidike, kot so varnost izdelkov, elektromagnetna združljivost in energijska učinkovitost.
Ta mednarodni standard podaja priporočila za delovanje naprave, kadar se uporablja z virom napajanja, skladnim s tem dokumentom. Ta mednarodni standard določa minimalno specifikacijo strojne opreme za zunanji napajalnik v skladu s standardom IEC 62680-1-3: USB tipa C. Ta dokument določa tudi podatkovne objekte, ki jih uporablja sistem za polnjenje v skladu s standardom IEC 62680-1-2: Specifikacija za zagotavljanje napajanja prek USB za razumevanje identitete, zasnove in zmogljivosti ter stanja delovanja zunanjega napajalnika. Standarda IEC 62680-1-2 in IEC 62680-1-3 se osredotočata na zagotavljanje moči (do največ 100 W) različnim računalniškim in potrošniškim elektronskim napravam, vključno s prenosnimi računalniki, tabličnimi računalniki, pametnimi telefoni, namiznimi računalniki z malim ohišjem, monitorji za prikazovanje in drugimi povezanimi večpredstavnostnimi napravami.
Prihodnje posodobitve specifikacij IEC 62680-1-2 in IEC 62680-1-3 bodo razširjene, da bo omogočeno zagotavljanje moči napravam, ki zahtevajo več kot 100 W, obenem pa bodo ostale znotraj tehničnih omejitev rešitve za kable in priključke univerzalnega serijskega vodila tipa C.
Ta dokument temelji na uveljavljenih mehanskih in električnih specifikacijah ter komunikacijskih protokolih, ki jih določata standarda IEC 62680-1-2 in IEC 62680-1-3. Te specifikacije podpirajo metode za določitev najučinkovitejše medobratovalnosti med nepreizkušenimi kombinacijami zunanjih napajalnikov in naprav s ciljem povečati zadovoljstvo potrošnikov.
V podporo izvajanju tega standarda so podane tudi informacije, ki opisujejo model medobratovalnosti za polnjenje prek USB, pregled specifikacije priključka USB tipa C in specifikacije za zagotavljanje napajanja prek USB ter dejavnike za učinkovitost polnjenja.

General Information

Status
Published
Publication Date
05-Aug-2021
Current Stage
6060 - Document made available - Publishing
Start Date
06-Aug-2021
Completion Date
06-Aug-2021

Relations

Buy Standard

Standard
EN IEC 63002:2022 - BARVE
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN IEC 63002:2020 - BARVE
English language
36 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 63002:2022
01-april-2022
Nadomešča:
SIST EN 63002:2018
Specifikacije in komunikacijske metode medobratovalnosti zunanjih napajalnikov,
ki se uporabljajo pri računalniških in potrošniških elektronskih napravah (IEC
63002:2021)
Interoperability specifications and communication method for external power supplies
used with computing and consumer electronics devices (IEC 63002:2021)
Interoperabilitäts-Spezifikationen und Kommunikationsverfahren für externe
Stromversorgungen zur Anwendung für Computer- und Unterhaltungselektronikgeräte
(IEC 63002:2021)
Spécifications d'interopérabilité et méthode de communication pour les alimentations
externes utilisées avec les dispositifs informatiques et les dispositifs électroniques grand
public (IEC 63002:2021)
Ta slovenski standard je istoveten z: EN IEC 63002:2021
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
35.020 Informacijska tehnika in Information technology (IT) in
tehnologija na splošno general
SIST EN IEC 63002:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 63002:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 63002:2022


EUROPEAN STANDARD EN IEC 63002

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2021
ICS 31.020; 35.200 Supersedes EN 63002:2017 and all of its amendments
and corrigenda (if any)
English Version
Interoperability specifications and communication method for
external power supplies used with computing and consumer
electronics devices
(IEC 63002:2021)
Spécifications d'interopérabilité et méthode de Interoperabilitäts-Spezifikationen und
communication pour les alimentations externes utilisées Kommunikationsverfahren für externe Stromversorgungen
avec les dispositifs informatiques et les dispositifs zur Anwendung für Computer- und
électroniques grand public Unterhaltungselektronikgeräte
(IEC 63002:2021) (IEC 63002:2021)
This European Standard was approved by CENELEC on 2021-07-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 63002:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 63002:2022
EN IEC 63002:2021 (E)
European foreword
The text of document 100/3463/CDV, future edition 2 of IEC 63002, prepared by IEC/TC 100 “Audio,
video and multimedia systems and equipment” was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 63002:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–04–01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–07–01
document have to be withdrawn
This document supersedes EN 63002:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63002:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added
...

SLOVENSKI STANDARD
oSIST prEN IEC 63002:2020
01-november-2020
Specifikacije in komunikacijske metode medobratovalnosti zunanjih napajalnikov,
ki se uporabljajo pri računalniških in potrošniških elektronskih napravah (TA 18)
Interoperability specifications and communication method for external power supplies
used with computing and consumer electronics devices (TA 18)
Méthode d'identification et d'interopérabilité des communications des alimentations
externes utilisées avec les dispositifs informatiques portatifs
Ta slovenski standard je istoveten z: prEN IEC 63002:2020
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
35.020 Informacijska tehnika in Information technology (IT) in
tehnologija na splošno general
oSIST prEN IEC 63002:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 63002:2020

---------------------- Page: 2 ----------------------
oSIST prEN IEC 63002:2020

100/3463/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63002 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2020-09-04 2020-11-27
SUPERSEDES DOCUMENTS:
100/3421/CD, 100/3450/CC

IEC TA 18 : MULTIMEDIA HOME SYSTEMS AND APPLICATIONS FOR END-USER NETWORKS
SECRETARIAT: SECRETARY:
Japan Mr Keisuke Koide
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

TC 108
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Interoperability specifications and communication method for external power supplies used
with computing and consumer electronics devices (TA 18)

PROPOSED STABILITY DATE: 2026

NOTE FROM TC/SC OFFICERS:


Copyright © 2020 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 63002:2020

---------------------- Page: 4 ----------------------
oSIST prEN IEC 63002:2020
100/3463/CDV – 2 – IEC CDV 63002 Ed 2 © IEC 2020
1 CONTENTS
2 FOREWORD . 4
3 INTRODUCTION . 6
4 1 Scope . 7
5 2 Normative references . 8
6 3 Terms, definitions and abbreviations. 8
7 3.1 Terms and definitions . 8
8 3.1.1 vendor identification (VID) . 8
9 3.1.2 power source or power supply or Source . 9
10 3.1.3 power sink or Sink . 9
11 3.1.4 external power supply (EPS) . 9
12 3.1.5 Programmable Power Supply (PPS) . 9
13 3.1.6 fixed supply or fixed voltage supply . 9
14 3.1.7 USB PD power (PDP) . 9
15 3.1.8 charging cable . 9
16 3.1.9 captive or permanently attached cable . 9
1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.