FprEN 50286:2022
(Main)Electrical insulating protective clothing for low-voltage installations
Electrical insulating protective clothing for low-voltage installations
This document is applicable to electrical insulating protective clothing used by skilled persons when they are working on or near live parts of Iow-voltage installations at nominal voltages up to 500 V AC or 750 V DC. The purpose of this clothing when used in conjunction with other PPE, such as boots and gloves etc., is to prevent dangerous current from passing through persons when there is a risk of unintentional contact with several live parts located in and around the working area. Where the risk of unintentional contact with live parts is restricted e.g. with live parts in front of the worker, the wearing of this clothing is not essential. The products designed and manufactured according to this document contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use. NOTE Some restrictions on the use of this clothing can exist in areas with hot climatic conditions.
Elektrisch isolierende Schutzkleidung für Arbeiten an Niederspannungsanlagen
Vêtements de protection isolants électriques pour installations basse tension
Le présent document s'applique aux vêtements de protection isolants électriques utilisés par les personnes qualifiées lorsqu'elles travaillent sur ou à proximité des parties sous tension des installations à basse tension à des tensions nominales allant jusqu'à 500 V en courant alternatif ou 750 V en courant continu. Le but de ce vêtement, lorsqu'il est utilisé avec d'autres EPI, comme des bottes, des gants, etc., est d'empêcher le passage d'un courant dangereux à travers les personnes lorsqu'il existe un risque de contact involontaire avec plusieurs parties sous tension situées dans et autour de la zone de travail. Lorsque le risque de contact involontaire avec des parties sous tension est limité, par exemple avec des parties sous tension devant le travailleur, le port de ce vêtement n'est pas indispensable. Les produits conçus et fabriqués conformément au présent document contribuent à la sécurité des utilisateurs, à condition qu'ils soient utilisés par des personnes qualifiées, conformément à des méthodes de travail en toute sécurité et aux instructions d'utilisation. NOTE Certaines restrictions d'utilisation de ces vêtements peuvent exister dans les zones où le climat est chaud.
Električno izolacijska zaščitna oblačila za delo na nizkonapetostnih inštalacijah
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 50286:2020
01-oktober-2020
Nadomešča:
SIST EN 50286:2000
Električno izolacijska zaščitna oblačila za delo na nizkonapetostnih inštalacijah
Electrical insulating protective clothing for low-voltage installations
Elektrisch isolierende Schutzkleidung für Arbeiten an Niederspannungsanlagen
Vêtements de protection isolants pour installations basse tension
Ta slovenski standard je istoveten z: prEN 50286
ICS:
13.260 Varstvo pred električnim Protection against electric
udarom. Delo pod napetostjo shock. Live working
13.340.10 Varovalna obleka Protective clothing
oSIST prEN 50286:2020 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 50286:2020
---------------------- Page: 2 ----------------------
oSIST prEN 50286:2020
EUROPEAN STANDARD DRAFT
prEN 50286
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2020
ICS Will supersede EN 50286:1999 and all of its
amendments and corrigenda (if any)
English Version
Electrical insulating protective clothing for low-voltage
installations
Vêtements de protection isolants pour installations basse Elektrisch isolierende Schutzkleidung für Arbeiten an
tension Niederspannungsanlagen
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2020-11-13.
It has been drawn up by CLC/TC 78.
If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 66983 Ref. No. prEN 50286 E
---------------------- Page: 3 ----------------------
oSIST prEN 50286:2020
prEN 50286:2020 (E)
Contents
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Requirements . 8
4.1 Non-electrical requirements .8
4.1.1 General .8
4.1.2 Design requirements.8
4.1.3 Size designation and fit .8
4.1.4 Comfort .8
4.1.5 Pockets and flaps .8
4.1.6 Closures and s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.