Power sources for manual metal arc welding with limited duty

This standard is applicable to welding power sources for manual metal arc welding with limited duty with covered stick electrodes. These welding power sources a) are limited to a rated maximum welding current of 160 A; b) are fitted with a thermal cut-out device; c) have performance based on the number of reference electrodes, capable of being melted with the welding power source in the cold and hot state and d) carry on their rating plate a declaration of the fuse size necessary for the maximum output. This standard is not applicable to rotating welding power sources or welding power sources with remote control or welding power sources incorporating frequency conversion. Note.- Inverter type welding power sources are excluded from this standard on the grounds that a) there are not yet available methods to test the safety of them b) they cause considerable harmonic distortions to the supply.

Schweißstromquellen zum Lichtbogenhandschweißen für begrenzten Betrieb

Source de courant pour soudage manuel à l'arc, à service limité

Električni izvori za ročno obločno varjenje za omejeno uporabo

General Information

Status
Withdrawn
Publication Date
27-Feb-1989
Withdrawal Date
31-Dec-1989
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Mar-2006
Completion Date
01-Mar-2006

Relations

Buy Standard

Standard + National Annex and/or Foreword
EN 50060:1996
Foreword and/or annex in Slovenian language, body of the standard in German language
52 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.