EN 60915:2007
(Main)Capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components
Capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components
IEC 60915:2006 contains preferred dimensions for shaft ends and bushes and for the mounting of single-hole, bush-mounted, shaft-operated variable capacitors, variable resistors and potentiometers. If other dimensions not listed in this standard have to be used, it is recommended to select them also from IEC 60390 and IEC 60620. This second edition cancels and replaces the first edition published in 1987 and constitutes a minor revision, related to tables, figures and references. This bilingual version, published in 2008-07, corresponds to the English version. The contents of the corrigendum of December 2008 have been included in this copy.
Widerstände und Kondensatoren zur Verwendung in Geräten der Elektronik - Vorzugsmaße für Wellenenden, Buchsen und für die Einloch-Buchsenmontage von wellenbetätigten elektronischen Bauelementen
Condensateurs et résistances utilisés dans les équipements électroniques - Dimensions préférentielles concernant les terminaisons des axes, les canons et le montage par le canon sur trou unique des composants électroniques munis d'un axe de commande
La CEI 60915:2006 contient les dimensions préférentielles concernant les terminaisons des axes, les canons et le montage par le canon sur trou unique de condensateurs variables, de résistances et de potentiomètres variables munis d'un axe de commande. Si d'autres dimensions non indiquées dans la présente norme doivent être utilisées, il est recommandé de les sélectionner aussi dans les normes CEI 60390 et la CEI 60620. Cette seconde édition annule et remplace la première édition publiée en 1987. Elle constitue une révision mineure des tableaux, valeurs et références. La présente version bilingue, publiée en 2008-07, correspond à la version anglaise. Le contenu du corrigendum de décembre 2008 a été pris en considération dans cet exemplaire.
Fiksni kondenzatorji in upori za uporabo v elektronski opremi - Priporočene mere za konce (valjastih) teles, izvrtine in montažo valjastih elektronskih komponent z eno odprtino skozi izvrtino (IEC 60915:2006 (EQV) + popravek maj 2007)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2008
)LNVQLNRQGHQ]DWRUMLLQXSRUL]DXSRUDERYHOHNWURQVNLRSUHPL3ULSRURþHQHPHUH
]DNRQFH YDOMDVWLK WHOHVL]YUWLQHLQPRQWDåRYDOMDVWLKHOHNWURQVNLKNRPSRQHQW]
HQRRGSUWLQRVNR]LL]YUWLQR ,(& (49 SRSUDYHNPDM
Fixed capacitors and resistors for use in electronic equipment - Preferred dimensions of
shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated
electronic components
Festkondensatoren und Widerstände zur Verwendung in Geräten der Elektronik -
Vorzugsmaße für Wellenenden, Buchsen und für die Einloch-Buchsenmontage von
wellenbetätigten elektronischen Bauelementen
Résistances et condensateurs fixes utilisés dans les équipements électroniques -
Dimensions préférentielles concernant les terminaisons des axes, les canons et le
montage par le canon sur trou unique des composants électroniques munis d'un axe de
commande
Ta slovenski standard je istoveten z: EN 60915:2007
ICS:
31.040.10 Fiksni upor Fixed resistors
31.060.10 Fiksni kondenzatorji Fixed capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60915
NORME EUROPÉENNE
September 2007
EUROPÄISCHE NORM
ICS 31.040; 31.060
English version
Fixed capacitors and resistors for use in electronic equipment -
Preferred dimensions of shaft ends, bushes and for the mounting
of single-hole, bush-mounted, shaft-operated electronic components
(IEC 60915:2006 + corrigendum 2007)
Résistances et condensateurs fixes Festkondensatoren und Widerstände zur
utilisés dans les équipements Verwendung in Geräten der Elektronik -
électroniques - Vorzugsmaße für Wellenenden, Buchsen
Dimensions préférentielles concernant und für die Einloch-Buchsenmontage
les terminaisons des axes, les canons von wellenbetätigten elektronischen
et le montage par le canon sur trou unique Bauelementen
des composants électroniques munis (IEC 60915:2006 + Corrigendum 2007)
d'un axe de commande
(CEI 60915:2006 + corrigendum 2007)
This European Standard was approved by CENELEC on 2007-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60915:2007 E
Foreword
The text of document 40/1654/CDV, future edition 2 of IEC 60915, prepared by IEC TC 40, Capacitors
and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel Unique Acceptance
Procedure and was approved by CENELEC as EN 60915 on 2007-09-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60915:2006 + corrigendum May 2007 was approved by
CENELEC as a European Standard without any modification.
__________
- 3 - EN 60915:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60390 – Dimensions of spindle ends for manually HD 363 S1 1977
operated electronic components
1) 2)
IEC 60620 – Dimensions for the mounting of single-hole, HD 391 S3 1988
bush-mounted, spindle-operated electronic
components
1)
Undated reference.
2)
Valid edition at date of issue.
INTERNATIONAL IEC
STANDARD 60915
Second edition
2006-11
Fixed capacitors and resistors for use
in electronic equipment – Preferred dimensions
of shaft ends, bushes and for the mounting
of single-hole, bush-mounted, shaft-operated
electronic components
© IEC 2006 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale P
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
– 2 – 60915 © IEC:2006(E)
CONTENTS
FOREWORD.3
1 Scope and object.5
2 Normative references .5
3 Preferred dimensions of shaft ends and bushes .5
3.1 Plain round shaft .6
3.2 Flatted shaft .7
3.3 Slotted shaft.8
3.4 Concentric shafts .9
4 Preferred dimensions for the mounting of single-hole, bush mounted shaft -
operated electronic components .10
4.1 Single-hole bush mounting with antirotation lug (non-turn device) on
mounting face.10
4.2 Single and double flatted bush mounting .13
4.3 Single-hole bush mounting with antirotation lug (non-turn device) on bush .14
4.4 Fixing (or mounting) nuts.15
4.5 Washers (flat, spring and internal tooth) .15
Figure 1 – Plain round shaft.6
Figure 2 – Flatted shaft.7
Figure 3 – Slotted shaft.8
Figure 4 – Concentric shaft.9
Figure 5 – Essential component dimensions .10
Figure 6 – Essential panel cut-out dimensions .11
Figure 7 – Essential component dimensions .13
Figure 8 – Essential panel cut-out dimensions .13
Figure 9 – Essential component dimensions .14
Figure 10 – Essential panel cut-out dimensions .14
Figure 11 – Fixing (or mounting) nuts.15
Table 1 – Preferred dimensions of plain round shaft .6
Table 2 – Preferred dimensions of flatted shaft .7
Table 3 – Preferred dimensions of slotted shaft .8
Table 4 – Preferred dimensions of concentric shafts .9
Table 5 – Preferred dimensions of bush, lug (non-turn device) and related place .12
Table 6 – Preferred dimensions of bush and mounting hole .13
Table 7 – Preferred dimensions of bush, lug (non-turn device) and mounting hole .14
Table 8 – Preferred dimensions of fixing (or mounting) nuts.15
60915 © IEC:2006(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS AND RESISTORS FOR USE
IN ELECTRONIC EQUIPMENT –
PREFERRED DIMENSIONS OF SHAFT ENDS, BUSHES AND FOR THE
MOUNTING OF SINGLE-HOLE, BUSH-MOUNTED, SHAFT-OPERATED
ELECTRONIC COMPONENTS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60915 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
This second edition cancels and replaces the first edition published in 1987 and constitutes a
minor revision, related to Tables, Figures and references.
The text of this standard is based on the following documents:
CDV Report on voting
40/1654/CDV 40/1783/RVC
Full information on the voting for the approval of this standard can be found in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.