EN 61162-1:2008

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners

Contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. Is intended to support one-way serial data transmission from a single talker to one or more listeners. This data is in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2. Is closely aligned with NMEA 0183 version 3.01. The main changes with respect to the previous edition include among others: - Clause 7 (Clause 5 in the previous edition) has been expanded to include two types of start of sentence delimiters. The conventional delimiter '$' is used with the conventional sentences which are now called parametric sentences. A new delimiter '!' identifies sentences that conform to special purpose encapsulation.

Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt - Digitale Schnittstellen - Teil 1: Ein Datensender und mehrere Datenempfänger

Matériels et systèmes de navigation et de radiocommunication maritimes - Interfaces numériques - Partie 1: Emetteur unique et récepteurs multiples

Pomorska plovba ter radiokomunikacijski oprema in sistemi - Digitalni vmesniki - 1. del: Enosmerna komunikacija en govorec - več poslušalcev (IEC 61162-1:2007)

General Information

• Status: Withdrawn
• Publication Date: 05-Mar-2008
• Withdrawal Date: 31-Jan-2011
• ICS: 33.060.01 - Radiocommunications in general
• ICS: 47.020.70 - Navigation and control equipment
• Technical Committee: CLC/SR 80 - Maritime navigation and radiocommunication equipment and systems
• Drafting Committee: IEC/TC 80 - IEC_TC_80
• Parallel Committee: IEC/TC 80 - IEC_TC_80
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Jan-2014
• Completion Date: 01-Jan-2014
• Ref Project: SIST EN 61162-1:2008 - Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 1: Single talker and multiple listeners

Relations

• Replaces: EN 61162-1:2000 - Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners
• Effective Date: 29-Jan-2023
• Replaced By: EN 61162-1:2011 - Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61162-1:2008
01-maj-2008
1DGRPHãþD
SIST EN 61162-1:2001
3RPRUVNDSORYEDWHUUDGLRNRPXQLNDFLMVNLRSUHPDLQVLVWHPL'LJLWDOQLYPHVQLNL
GHO(QRVPHUQDNRPXQLNDFLMDHQJRYRUHFYHþSRVOXãDOFHY,(&
Maritime navigation and radiocommunication equipment and systems - Digital interfaces
- Part 1: Single talker and multiple listeners (IEC 61162-1:2007)
Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt -
Digitale Schnittstellen - Teil 1: Ein Datensender und mehrere Datenempfänger (IEC
61162-1:2007)
Matériels et systèmes de navigation et de radiocommunication maritimes - Interfaces
numériques - Partie 1: Emetteur unique et récepteurs multiples (CEI 61162-1:2007)
Ta slovenski standard je istoveten z: EN 61162-1:2008
ICS:
33.060.01
47.020.70
SIST EN 61162-1:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61162-1

NORME EUROPÉENNE
March 2008
EUROPÄISCHE NORM

ICS 47.020.70 Supersedes EN 61162-1:2000


English version


Maritime navigation and radiocommunication equipment and systems -
Digital interfaces -
Part 1: Single talker and multiple listeners
(IEC 61162-1:2007)


Matériels et systèmes de navigation  Navigations- und
et de radiocommunication maritimes - Funkkommunikationsgeräte
Interfaces numériques - und -systeme für die Seeschifffahrt -
Partie 1: Emetteur unique Digitale Schnittstellen -
et récepteurs multiples Teil 1: Ein Datensender
(CEI 61162-1:2007) und mehrere Datenempfänger
(IEC 61162-1:2007)




This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in two official versions (English and German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61162-1:2008 E

---------------------- Page: 2 ----------------------

EN 61162-1:2008 - 2 -
Foreword
The text of document 80/464/FDIS, future edition 3 of IEC 61162-1, prepared by IEC TC 80, Maritime
navigation and radiocommunication equipment and systems, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 61162-1 on 2008-02-01.
This European Standard supersedes EN 61162-1:2000.
The main changes with respect to EN 61162-1:2000 are listed below:
– normative references have been renumbered from 1.2 to 2, Terms and definitions from 1.3 to 3 and
Manufacturers documentation from 2 to 4. Thereafter all clauses are numbered two ahead of those in
EN 61162-1:2000;
– Clause 7 (Clause 5 in EN 61162-1:2000) has been expanded to include two types of start of sentence
delimiters. The conventional delimiter “$” is used with the conventional sentences which are now
called parametric sentences. A new delimiter “!” identifies sentences that conform to special purpose
encapsulation. The example applications in Clause 9 (Clause 7 in EN 61162-1:2000) have been
expanded to describe both types;
– the tables in Clause 8 (Clause 6 in EN 61162-1:2000) have been updated. The previous Table 5
(Approved sentence formatters) and the associated Annex A (Minimum required sentences) have
been deleted;
– Clause 8 has been expanded to include new and revised sentences;
– four new annexes have been added to support the text.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-11-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-02-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement n
...