EN 62264-3:2007

Enterprise-control system integration - Part 3: Activity models of manufacturing operations management

It defines activity models of manufacturing operations management that enable enterprise system to control system integration. The activities defined are consistent with the object models definitions given in IEC 62264-1. The modelled activities operate between business planning and logistics functions, defined as the Level 4 functions and the process control functions, defined as the Level 2 functions of IEC 62264-1. The scope of this standard is limited to: - a model of the activities associated with manufacturing operations management, Level 3 functions; - an identification of some of the data exchanged between Level 3 activities.

Integration von Unternehmens-EDV und Leitsystemen - Teil 3: Aktivitätsmodelle für das operative Produktionsmanagement

Intégration du système de commande d'entreprise - Partie 3: Modèles d'activités pour la gestion des opérations de fabrication

Expose les modèles d'activité et les flux de données pour les informations de fabrication permettant l'intégration des systèmes de commande d'entreprise. Les activités modélisées agissent entre les fonctions de planification et de logistique d'entreprises de Niveau 4 et les fonctions de contrôle de processus manuels et automatiques de Niveau 2. Les modèles sont cohérents avec les modèles d'objets de la CEI 62264-1 et avec les définitions (commande et opérations de fabrication) du Niveau 3. L'objectif de la présente norme est de réduire le risque, le coût et les erreurs associés à la mise en uvre des systèmes d'entreprise et des systèmes de gestion des opérations de fabrication de telle sorte qu'ils interagissent et s'intègrent facilement. La norme peut aussi être utilisée pour réduire l'effort associé à la mise en place de nouveaux produits proposés.

Integracija sistemov za upravljanje podjetij - 3. del: Model aktivnosti vodenja proizvodnje (IEC 62264-3:2007)

General Information

• Status: Withdrawn
• Publication Date: 19-Jul-2007
• Withdrawal Date: 30-Jun-2010
• ICS: 25.040.01 - Industrial automation systems in general
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65A - IEC_SC_65A
• Parallel Committee: IEC/SC 65A - IEC_SC_65A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 20-Jan-2020
• Completion Date: 20-Jan-2020
• Ref Project: SIST EN 62264-3:2007 - Enterprise-control system integration -- Part 3: Activity models of manufacturing operations management

Relations

• Replaced By: EN 62264-3:2017 - Enterprise-control system integration - Part 3: Activity models of manufacturing operations management
• Effective Date: 25-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2007
Integracija sistemov za upravljanje podjetij - 3. del: Model aktivnosti vodenja
proizvodnje (IEC 62264-3:2007)
Enterprise-control system integration - Part 3: Activity models of manufacturing
operations management
Integration von Unternehmens-EDV und Leitsystemen - Teil 3: Aktivitätsmodelle für das
operative Produktionsmanagement
Intégration du systeme de commande d'entreprise - Partie 3: Modeles d'activités pour la
gestion des opérations de fabrication
Ta slovenski standard je istoveten z: EN 62264-3:2007
ICS:
25.040.01 Sistemi za avtomatizacijo v Industrial automation
industriji na splošno systems in general
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62264-3
NORME EUROPÉENNE
July 2007
EUROPÄISCHE NORM
ICS 25.040.01; 35.240.50
English version
Enterprise-control system integration -
Part 3: Activity models of manufacturing operations management
(IEC 62264-3:2007)
Intégration du système  Integration von Unternehmens-EDV
de commande d'entreprise - und Leitsystemen -
Partie 3: Modèles d'activités Teil 3: Aktivitätsmodelle
pour la gestion des opérations für das operative
Produktionsmanagement
de fabrication
(CEI 62264-3:2007) (IEC 62264-3:2007)

This European Standard was approved by CENELEC on 2007-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62264-3:2007 E
Foreword
The text of document 65A/476/CDV, future edition 1 of IEC 62264-3 prepared by SC 65A, System
aspects, of IEC TC 65, Industrial-process measurement and control, and SC 5, JWG 15, of ISO TC 184,
Enterprise-control system integration, was submitted to the IEC-CENELEC parallel Unique Acceptance
Procedure and was approved by CENELEC as EN 62264-3 on 2007-07-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62264-3:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61131-3 NOTE  Harmonized as EN 61131-3:2003 (not modified).
__________
- 3 - EN 62264-3:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 61512-1 1997 Batch control - EN 61512-1 1999
Part 1: Models and terminology

1)
IEC 62264-1 - Enterprise-control system integration - - -
Part 1: Models and terminology

1)
IEC 62264-2 - Enterprise-control system integration - - -
Part 2: Object model attributes

ISO 15704 2000 Industrial automation systems - Requirements- -
for enterprise-reference architectures and
methodologies
1)
Undated reference.
INTERNATIONAL IEC
STANDARD
CEI
62264-3
NORME
First edition
INTERNATIONALE
Première édition
2007-06
Enterprise-control system integration –
Part 3:
Activity models of manufacturing
operations management
Intégration du système
de commande d’entreprise –
Partie 3:
Modèles d’activités pour la gestion
des opérations de fabrication
PRICE CODE
XE
CODE PRIX
For price, see current catalogue
Pour prix, voir catalogue en vigueur

– 2 – 62264-3 © IEC:2007
CONTENTS
FOREWORD.6
INTRODUCTION.8

1 Scope.9
2 Normative references .9
3 Terms, definitions and abbreviations .9
3.1 Terms and definitions .9
3.2 Abbreviations .11
4 Structuring models .12
4.1 Manufacturing operations management .12
4.2 Functional hierarchy.13
4.3 Manufacturing operations management elements .15
4.4 Criterion for defining activities below Level 4.15
4.5 Categories of production information .15
4.6 Manufacturing operations information.16
5 Structuring models .17
5.1 Generic template for categories of manufacturing operations management .17
5.2 Interaction among generic activity models .18
5.3 Expanded equipment hierarchy model .20
5.4 Expanded decision hierarchy model .22
5.5 Hierarchy of planning and scheduling .25
5.6 Resource definition for scheduling activities .26
6 Production operations management.27
6.1 General activities in production operations management .27
6.2 Production operations management activity model .27
6.3 Information exchange in production operations management.28
6.4 Product definition management .29
6.5 Production resource management .31
6.6 Detailed production scheduling.34
6.7 Production dispatching .37
6.8 Production execution management.41
6.9 Production data collection .42
6.10 Production tracking .43
6.11 Production performance analysis.45
7 Maintenance operations management .50
7.1 General activities in maintenance operations management.50
7.2 Maintenance operations management activity model .50
7.3 Information exchanged in maintenance operations management .51
7.4 Maintenance definition management .53
7.5 Maintenance resource management .54
7.6 Detailed maintenance scheduling .54
7.7 Maintenance dispatching .55
7.8 Maintenance execution management.55

62264-3 © IEC:2007 – 3 –
7.9 Maintenance data collection .55
7.10 Maintenance tracking .55
7.11 Maintenance analysis .56
8 Quality operations management .57
8.1 General activities in quality operations management .57
8.2 Quality test operations activity model .59
8.3 Information exchanged in quality test operations management .60
8.4 Quality test definition management.62
8.5 Quality test resource management .62
8.6 Detailed quality test scheduling .63
8.7 Quality test dispatching .64
8.8 Quality test execution management.64
8.9 Quality test data collection .65
8.10 Quality test tracking .65
8.11 Quality performance analysis .65
8.12 Supported activities.66
9 Inventory operations management.67
9.1 General activities in inventory operations management .67
9.2 Inventory operations management activity model .68
9.3 Information exchanged in inventory operations management.69
9.4 Inventory definition management.70
9.5 Inventory resource management .70
9.6 Detailed inventory scheduling.71
9.7 Inventory dispatching .72
9.8 Inventory execution management .72
9.9 Inventory tracking.73
9.10 Inventory analysis .74
10 Completeness, compliance and conformance .75
10.1 Completeness .75
10.2 Compliance .75
10.3 Conformance.75

Annex A (informative) Other enterprise activities affecting manufacturing operations .76
Annex B (informative) Technical and responsibility boundaries .81
Annex C (informative) Scheduling hierarchy.86
Annex D (informative) Associated standards.88
Annex E (informative) Frequently asked questions.92
Annex F (i
...