EN 62343-2:2011
(Main)Dynamic modules - Part 2: Reliability qualification
Dynamic modules - Part 2: Reliability qualification
IEC 62343-2:2011 applies to dynamic modules and devices (DMs) which are commercially available. Examples are tuneable chromatic dispersion compensators, reconfigurable optical cross-connects, and dynamic channel equalizers. (Optical amplifiers are not included in this list, but are treated in IEC 61291-5-2). For reliability qualification purposes, some information about the internal components, parts and interconnections is needed; these internal parts are treated as black boxes. This standard gives requirements for the evaluation of DM reliability by combining the reliability of such internal black boxes.
Dynamische Module - Teil 2: Beurteilung der Zuverlässigkeit
Modules dynamiques - Partie 2: Qualification de fiabilité
La CEI 62343-2:2011 s'applique aux dispositifs et aux modules dynamiques (DM: Dynamic Module) disponibles dans le commerce. Des exemples sont les compensateurs de dispersion chromatique accordables, les brasseurs optiques reconfigurables et les égaliseurs de voies dynamiques. (Les amplificateurs optiques ne sont pas inclus dans cette liste, mais ils sont traités dans la CEI 61291-5-2). Dans le cadre de la qualification de fiabilité, certaines informations sur les interconnexions, les pièces et les composants internes sont nécessaires. Ces pièces internes sont traitées comme des boîtes noires. La présente norme donne les exigences pour l'évaluation de la fiabilité des modules dynamiques en combinant la fiabilité de telles boîtes noires internes.
Dinamični moduli - 2. del: Kvalifikacije zanesljivosti (IEC 62343-2:2011)
Ta del IEC 62343 velja za dinamične module in naprave (DM), ki so na voljo na tržišču. Primeri so nastavljivi kompenzatorji za kromatično disperzijo, optični prevezovalni sistemi z zmožnostjo preoblikovanja in dinamični kanalski stabilizatorji. (Optični ojačevalniki niso zajeti na tem seznamu, ampak so obravnavani v IEC 61291-5-2). Za namene zanesljivosti kvalifikacije je potrebnih nekaj podatkov o notranjih komponentah, sestavnih delih in medsebojnih povezavah; ti notranji sestavni deli se obravnavajo kot črna skrinjica. Ta standard podaja zahteve za vrednotenje zanesljivosti DM s kombiniranjem zanesljivosti takih notranjih črnih skrinjic. Cilji tega dela IEC 62343 so: ? opredeliti zahteve za kvalifikacijo zanesljivosti naprav DM; podati minimalni seznam preskusov kvalifikacije zanesljivosti, zahtev glede meril za okvare med preskušanjem in napovedi zanesljivosti, in podajajo ustrezne normativne sklice.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2011
'LQDPLþQLPRGXOLGHO .YDOLILNDFLMH]DQHVOMLYRVWL ,(&
Dynamic modules - Part 2: Reliability qualification (IEC 62343-2:2011)
Dynamische Module - Teil 2: Beurteilung der Zuverlässigkeit (IEC 62343-2:2011)
Modules dynamiques - Partie 2: Qualification de fiabilité (CEI 62343-2:2011)
Ta slovenski standard je istoveten z: EN 62343-2:2011
ICS:
33.180.30 2SWLþQLRMDþHYDOQLNL Optic amplifiers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 62343-2
NORME EUROPÉENNE
May 2011
EUROPÄISCHE NORM
ICS 33.180
English version
Dynamic modules -
Part 2: Reliability qualification
(IEC 62343-2:2011)
Modules dynamiques - Dynamische Module -
Partie 2: Qualification de fiabilité Teil 2: Beurteilung der Zuverlässigkeit
(CEI 62343-2:2011) (IEC 62343-2:2011)
This European Standard was approved by CENELEC on 2011-04-18. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62343-2:2011 E
Foreword
The text of document 86C/960/CDV, future edition 1 of IEC 62343-2, prepared by SC 86C, Fibre optic
systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 62343-2 on 2011-04-18.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2012-01-18
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-04-18
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62343-2:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61751 NOTE Harmonized as EN 61751.
IEC 61291-5-2 NOTE Harmonized as EN 61291-5-2.
ISO 9001:2000 NOTE Harmonized as EN ISO 9001:2000.
__________
ISO 9001:2000 is superseded by ISO 9001:2008, which is harmonized as EN ISO 9001:2008.
- 3 - EN 62343-2:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention
IEC 61300-2-12 - Fibre optic interconnecting devices and EN 61300-2-12 -
passive components - Basic test and
measurement procedures -
Part 2-12: Tests - Impact
IEC 62005-9-2 - Reliability of fibre optic interconnecting - -
devices and passive optical components -
Part 9-2: Reliability qualification for single fibre
optic connector sets - single mode
IEC 62572 Series Fibre optic active components and devices - - -
Reliability standards
ISO 9000 - Quality management systems - EN ISO 9000 -
Fundamentals and vocabulary
IEC 62343-2 ®
Edition 1.0 2011-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Dynamic modules –
Part 2: Reliability qualification
Modules dynamiques –
Partie 2: Qualification de fiabilité
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX R
ICS 33.180 ISBN 978-2-88912-405-3
– 2 – 62343-2 © IEC:2011
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 7
4 Reliability qualification considerations . 8
4.1 General . 8
4.2 General consideration approach . 8
4.3 DM product design . 8
5 Reliability qualification requirements . 8
5.1 General . 8
5.2 Demonstration of product quality . 9
5.3 Testing responsibilities . 9
5.4 Tests . 10
5.4.1 Thorough characterization . 10
5.4.2 Reliability qualification of components, parts and interconnections . 10
5.4.3 Reliability qualification of DM assembly process . 10
5.4.4 Reliability qualification of the Design 1 DM . 10
5.4.5 Reliability qualification of the Design 2 DM . 13
5.4.6 Pass/fail criteria . 15
5.5 Reliability assessment procedure . 15
5.5.1 Analysis of reliability results . 15
5.5.2 Reliability calculations . 16
5.5.3 Reliability qualification test methods . 17
6 Guidance . 17
6.1 FMEA and qualification-by-similarity . 17
Bibliography . 18
Table 1 – Minimum list for tests required on Design 1 DMs . 12
Table 2 – Minimum list for tests required on Design 2 DMs . 14
Table 3 – Failure rate of parts . 16
Table 4 – Relevant list of IEC reliability test methods for optical components. 17
62343-2 © IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DYNAMIC MODULES –
Part 2: Reliability qualification
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62343-2 has been prepared by subcommittee 86C: Fibre optic
systems and active devices, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
CDV Report on voting
86C/960/CDV 86C/978/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
– 4 – 62343-2 © IEC:2011
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
62343-2 © IEC:2011 – 5 –
INTRODUCTION
This part of IEC 6
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.