IEC 61547:2009/COR1:2010
(Corrigendum)Corrigendum 1 - Equipment for general lighting purposes - EMC immunity requirements
Corrigendum 1 - Equipment for general lighting purposes - EMC immunity requirements
Corrigendum 1 - Equipements pour l'éclairage à usage général - Exigences concernant l'immunité CEM
General Information
Relations
Standards Content (Sample)
IEC 61547 CEI 61547
(Second edition – 2009) (Deuxième édition – 2009)
Equipment for general lighting purposes – Equipements pour l'éclairage à usage général –
EMC immunity requirements Exigences concernant l’immunité CEM
CORRIGENDUM 1
5.7 Surges
...
This May Also Interest You
This part of IEC 61557 specifies the requirements for measuring equipment that combines several measuring functions or methods of testing, measuring or monitoring, that are in accordance with the respective parts of IEC 61557, into one piece of apparatus.
Measuring equipment which combines measuring functions or methods of testing, measuring or monitoring covered by the respective parts of IEC 61557 with those not covered by the respective parts of IEC 61557 is also within the scope of this document.
- Standard29 pagesEnglish languagesale 15% off
IEC 63391:2024 applies to security screening systems that utilize active millimetre-wave (MMW) imaging to inspect persons who are not inside vehicles, containers, or enclosures. Specifically, this document applies to systems used to detect objects carried on the body of the individual being screened at a security checkpoint. This document applies to systems that screen people using radiation in the range between 3 GHz and 150 GHz (100 mm to 2 mm).
This document specifies the technical requirements, test methods, and signage of the active MMW systems for security screening of humans.
This document does not specify minimum or baseline requirements of image quality, automated threat recognition (ATR) performance, nor does it specify a minimum detection time
- Standard22 pagesEnglish languagesale 15% off
IEC 62341-6-7:2024 specifies the standard measuring conditions and measuring methods for determining the optical characteristics of an OLED display with under-screen camera; other under-screen features, such as under-screen fingerprint or under-screen time of flight (TOF) can also be applied. This document applies to OLED displays such as mobile phone, monitor and TV with under-screen features.
NOTE Under-screen feature will want the display to be partially transparent and partially non-transparent, and this can be achieved only by certain types of display technology, for example OLED. This document mainly focuses on OLED display with under-screen feature.
- Standard21 pagesEnglish languagesale 15% off
IEC 63399:2024 applies to household and similar electrical rice cookers.
This document defines the main performance characteristics that are of interest to the user and specifies methods for measuring these characteristics.
This document does not specify the requirements for performance.
This document does not apply to the pressure type rice cooker or the micro-pressure rice cooker.
This document does not apply to rice cookers with the rated volume of rice cooker larger than 8 L.
The pressure type rice cooker refers to a rice cooker that cooks at a pressure more than 40 kPa.
The micro-pressure rice cooker refers to a rice cooker that cooks at a pressure larger than 10 kPa but not more than 40 kPa.
This document does not deal with safety requirements (covered in IEC 60335-2-15).
- Standard68 pagesEnglish and French languagesale 15% off
IEC/IEEE 62582-1:2024 is available as IEC/IEEE 62582-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC/IEEE 62582-1:2024 contains requirements for application of the other parts of IEC/IEEE 62582 related to specific methods for condition monitoring in electrical equipment important to safety of nuclear power plants. It also includes requirements which are common to all methods. The procedures defined in IEC/IEEE 62582 are intended for detailed condition monitoring.
IEC/IEEE 62582 specifies condition monitoring methods in sufficient detail to enhance the accuracy and repeatability, and provide standard formats for reporting the results. The methods specified are applicable to electrical equipment containing polymeric materials. Some methods are especially designed for the measurement of condition of a limited range of equipment whilst others can be applied to all types of equipment for which the polymeric parts are accessible.
- Standard21 pagesEnglish languagesale 15% off
- Standard21 pagesEnglish languagesale 15% off
IEC/IEEE 63332-387:2024 defines the criteria for the application and testing of diesel generator (DG) units used as safety class standby power supplies in nuclear facilities. In general, the standard applies to new nuclear facilities as well as for upgrading or back-fitting of existing facilities. Existing facilities can voluntarily adopt the requirements to enhance the performance capabilities and reliability of the installed DG units. The standard can be used in applications where highly reliable onsite alternating current (AC) power source is required to maintain plant safety following an event with potential loss of offsite power for an extended duration.
This document provides the principal design criteria, the design features, testing, and qualification requirements for the individual DG units that enable them to meet their functional requirements as a part of the standby power supply under the conditions produced by the design basis events catalogued in the plant safety analysis.
- Standard139 pagesEnglish and French languagesale 15% off
IEC 62899-301-3:2024 defines measurement terms and methods related to the shape errors of printing plate rollers. Measurement terms include radius, total run-out, and three kinds of shape errors of printing plate rollers that are axial deviation, radial deviation, and cross-sectional deviation. The remaining shape error excluding the three errors mentioned above is defined as a residual shape error.
This document applies to printing plate rollers with or without patterns while excluding the pattern area for the measurement.
- Standard24 pagesEnglish languagesale 15% off
IEC TR 63368:2024 provides guidance on off-site real-time simulation tests of control and protection (C&P) systems for HVDC power transmission systems. The off-site real-time simulation tests are carried out after the testing of C&P devices and prior to on-site system tests.
This document covers point-to-point, back-to-back, and multi-terminal HVDC systems of line commutated converters (LCC), voltage-sourced converters (VSC) and hybrid HVDC technologies.
In order to provide practical guidance for the functional performance tests of HVDC power transmission systems, this document covers the test environment, the contents and methods of functional performance tests, and the test report.
- Technical report30 pagesEnglish languagesale 15% off
IEC 63145-22-20:2024 specifies the standard measuring conditions and measurement methods for determining the image quality of augmented reality (AR) type eyewear displays. This document applies to see-through type (AR glasses) eyewear displays using virtual image optics.
See-through type displays (VR glasses), contact lens-type displays, and retina direct projection displays are out of the scope of this document.
- Standard1 pageEnglish languagesale 15% off
IEC TR 63484:2024 information about fungal growth on the outer sheath of optical fibre cables and on the inner components of the cable. It also provides guidance for specifying fungus resistance performance of optical cable outer sheath and internal cable components, including recommendations for fungus resistance test method as well as evaluation after test.
This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to hybrid telecommunication cables having a combination of both optical fibres and electrical conductors.
Since conditions suitable for fungal growth include high relative humidity and a warm atmosphere, the document is applicable to optical cables intended for transportation, storage and use under such environment over certain period, for instance, some days at least.
- Technical report15 pagesEnglish languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.