IEC 60811-504:2012
(Main)Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
IEC 60811-504:2012 gives the procedure for performing bending tests at low temperature on extruded insulations and sheaths. IEC 60811-504:2012 cancels and replaces 8.1 and 8.2 of IEC 60811-1-4:1985, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100: 2012.
This publication is to be read in conjunction with IEC 60811-100:2012.
Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 504: Essais mécaniques - Essai d'enroulement à basse température pour les enveloppes isolantes et les gaines
La CEI 60811-504:2012 décrit la procédure de réalisation des essais d'enroulement à basse température sur les enveloppes isolantes et gaines extrudées. La CEI 60811-504:2012 annule et remplace 8.1 et 8.2 de la CEI 60811-1-4:1985, qui est supprimée. L'ensemble des informations relatives aux remplacements figure dans l'Annexe A de la CEI 60811-100:2012. Aucune modification technique n'a été effectuée par rapport à l'édition précédente; voir cependant l'avant-propos de la CEI 60811-100:2012.
Cette publication doit être lue conjointement avec la CEI 60811-100:2012.
Alarm systems - Part 2: Requirements for intruder alarm systems - Section Six: Passive infra red detectors for use in buildings
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST IEC 60839-2-6:1995
01-september-1995
Alarm systems - Part 2: Requirements for intruder alarm systems - Section Six:
Passive infra red detectors for use in buildings
Alarm systems. Part 2: Requirements for intruder alarm systems. Section Six: Passive
infra-red detectors for use in buildings
Systèmes d'alarme. Deuxième partie: Prescriptions pour les systèmes d'alarme anti-
intrusion. Section six: Détecteurs infrarouges passifs utilisés dans les bâtiments
Ta slovenski standard je istoveten z: IEC 60839-2-6
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
SIST IEC 60839-2-6:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST IEC 60839-2-6:1995
---------------------- Page: 2 ----------------------
SIST IEC 60839-2-6:1995
NORME CEI
INTERNATIONALE IEC
60839-2-6
INTERNATIONAL
Première édition
STAN DARD
First edition
1990-01
Systèmes d'alarme
Partie 2:
Prescriptions pour les systèmes d'alarme
anti-intrusion
Section 6 – Détecteurs infrarouges passifs
utilisés dans les bâtiments
Alarm systems
Part 2:
Requirements for intruder alarm systems
Section 6 – Passive infra-red detectors
for use in buildings
© IEC 1990 Droits de reproduction réservés — Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
IEC
MetxayHapoimasa 3nenrporexHH4ecnaR HoMuccian
Pour prix, voir catalogue en vigueur
• •
For price, see current catalogue
---------------------- Page: 3 ----------------------
SIST IEC 60839-2-6:1995
839-2-6 © IEC - 3
CONTENTS
Page
FOREWORD
Clause
7
1 Scope
7
2 Normative references
3 Definitions 9
4 General considerations 9
5 Requirements 11
6 Test procedures 13
FIGURES 21
---------------------- Page: 4 ----------------------
SIST IEC 60839-2-6:1995
839-2-6 ©
IEC - 5 -
INTERNATIONAL ELECTROTECHNICAL COMMISSION
ALARM SYSTEMS
Part 2: Requirements for intruder alarm systems
Section Six - Passive infra-red detectors for
use in buildings
FOREWORD
1)
The formal decisions or agreements of the IEC on technical matters,
prepared by Technical Committees on which all the National Committees
having a special interest therein are represented, express, as nearly
as possible, an international consensus of opinion on the subjects
dealt with.
2)
They have the form of recommendations for international use and they
are accepted by the National Committees in that sense.
3) In order to promote
international unification,
the IEC expresses the
wish that all National Committees should adopt the text of the IEC
recommendation for their national rules in so far as national
conditions will permit. Any divergence between the IEC recommendation
and the corresponding national rules
should, as far as possible, be
clearly indicated in the latter.
This standard has been prepared by IEC Technical Committee No. 79:
Alarm systems.
The text of this standard is based on the following documents:
Six Months' Rule
Report on Voting
79(CO)24 79(CO)31
Full information on the voting for the approval of this standard can be
found in the Voting Report indicated in the above table.
---------------------- Page: 5 ----------------------
SIST IEC 60839-2-6:1995
839-2-6 © IEC - 7
ALARM SYSTEMS
Part 2: Requirements for intruder alarm systems
Section Six - Passive infra-red detectors for
use in buildings
1 Scope
This International Standard gives the specific requirements and test pro-
cedures for passive infra-red detectors for use in intruder alarm systems
installed in buildings. This standard is an addition to the general require-
ments for detectors for use in intruder alarm systems as specified in IEC
839-2-2; it shall also be used in conjunction with the standard for general
requirements of alarm systems, IEC 839-1-1. The detector may include
more than one sensor, but all sensors shall be in the same housing.
The object of this standard is to specify those requirements for passive
infra-red detectors which will ensure that they will perform satisfactorily
and minimize false alarms.
2 Normative references
The following standards contain provisions which, through reference in
this text, constitute provisions of this International Standard. At the time
of publication, the editions indicated were va
...
IEC 60811-504
®
Edition 1.0 2012-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electric and optical fibre cables – Test methods for non-metallic materials –
Part 504: Mechanical tests – Bending tests at low temperature for insulation
and sheaths
Câbles électriques et à fibres optiques – Méthodes d’essai pour les matériaux
non-métalliques –
Partie 504: Essais mécaniques – Essai d’enroulement à basse température
pour les enveloppes isolantes et les gaines
IEC 60811-504:2012
---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2012 IEC, Geneva, Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.
IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
---------------------- Page: 2 ----------------------
IEC 60811-504
®
Edition 1.0 2012-03
INTERNATIONAL
STAN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.