SIST EN 1744-7:2012
(Main)Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
This standard specifies the test method used for the determination of the loss on ignition (L.O.I) of aggregates produced by processing Municipal Incinerator Bottom Ash (MIBA). Unless otherwise stated, the test methods specified in this European Standard may be used for factory production control, for audit tests or for type tests. This standard describes the reference methods use for type testing and in case of dispute (and alternatives methods) for LOI of MIBA (and if mentioned alternative ones). For the purpose of type testing and in case of dispute only the reference method should be used. For other purposes, in particular factory production control, other methods may be used provided than an appropriate working relationship with the reference method has been established.
Prüfverfahren für chemische Eigenschaften von Gesteinskörnungen - Teil 7: Bestimmung des Glühverlustes von Hausmüllverbrennungsasche (HMV-Asche)
Diese Norm legt das Prüfverfahren für die Bestimmung des Glühverlustes (LOI, en. loss on ignition) von Gesteinskörnungen (HMVA Gesteinskörnungen) fest, die durch Aufbereitung von Hausmüllverbrennungs¬asche (HMVA) erzeugt werden.
Sofern nicht anders festgelegt, dürfen die in dieser Norm festgelegten Prüfverfahren für die werkseigene Produktionskontrolle, für Audits oder für Erstprüfungen angewendet werden.
Diese Europäische Norm legt die für die Erstprüfung und in Streitfällen anzuwendenden Referenzverfahren für die Bestimmung des LOI von HMVA Gesteinskörnungen (und falls angegeben, von alternativen Gesteins-körnungen) fest. Für den Zweck der Erstprüfung und in Streitfällen sollte nur das Referenzverfahren angewendet werden. Für andere Zwecke, speziell im Rahmen der werkseigenen Produktionskontrolle, dürfen andere Verfahren angewendet werden, sofern ein ausreichender Zusammenhang zum Referenzverfahren nachgewiesen wurde.
Essais pour déterminer les caractéristiques chimiques des granulats - Partie 7: Détermination de la perte au feu des mâchefers d'incinération d'ordures ménagères (MIOM)
La présente Norme spécifie la méthode d’essai utilisée pour déterminer la perte au feu de granulats (granulats
de MIOM) entraînée par le traitement des mâchefers d’incinération d’ordures ménagères (MIOM).
Sauf mention contraire, les méthodes d’essai spécifiées dans la présente Norme européenne peuvent servir
au contrôle de la production en usine, à des essais d’audit ou à des essais de type.
La présente Norme décrit les méthodes de référence servant aux essais de type et en cas de désaccord
concernant la perte au feu de granulats de MIOM (ainsi que d’autres options, le cas échéant). Pour les
besoins des essais de type et en cas de désaccord, il convient de n’utiliser que la méthode de référence. Pour
les besoins du contrôle de la production en usine en particulier, d’autres méthodes peuvent être utilisées dans
la mesure où une relation de fonctionnement appropriée a été établie avec la méthode de référence.
Preskusi kemičnih lastnosti agregatov - 7. del: Ugotavljanje žarilne izgube agregata iz pepela iz sežigalnic komunalnih odpadkov
Ta standard določa preskusne metode, ki se uporabljajo za ugotavljanje žarilne izgube agregatov, proizvedenih s predelovanjem pepela iz sežigalnic komunalnih odpadkov. Če ni navedeno drugače, se lahko preskusne metode iz tega evropskega standarda uporabljajo za kontrolo proizvodnje v obratu, zunanje kontrolne preskuse ali tipske preskuse. V tem standardu so opisane referenčne metode, ki se uporabljajo za tipsko preskušanje in v primeru spora (in alternativnih metod) za žarilno izgubo agregata iz pepela iz sežigalnic komunalnih odpadkov (tudi alternativne metode, če so omenjene). Za namen tipskega preskušanja in v primeru spora naj bi se uporabljala le referenčna metoda. Za druge namene, zlasti za kontrolo proizvodnje v obratu, se lahko uporabijo druge metode, če obstaja primerna delovna povezava z referenčno metodo.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prüfverfahren für chemische Eigenschaften von Gesteinskörnungen - Teil 7: Bestimmung des Glühverlustes von Hausmüllverbrennungsasche (HMV-Asche)Essais pour déterminer les caractéristiques chimiques des granulats - Partie 7: Détermination de la perte au feu des mâchefers d'incinération d'ordures ménagères (MIOM)Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)91.100.15Mineralni materiali in izdelkiMineral materials and products13.030.01Odpadki na splošnoWastes in generalICS:Ta slovenski standard je istoveten z:EN 1744-7:2012SIST EN 1744-7:2012en,fr,de01-maj-2012SIST EN 1744-7:2012SLOVENSKI
STANDARD
SIST EN 1744-7:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1744-7
February 2012 ICS 91.100.15 English Version
Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
Essais pour déterminer les caractéristiques chimiques des granulats - Partie 7: Détermination de la perte au feu des mâchefers d'incinération d'ordures ménagères (MIOM)
Prüfverfahren für chemische Eigenschaften von Gesteinskörnungen - Teil 7: Bestimmung des Glühverlustesvon Hausmüllverbrennungsasche (HMV-Asche) This European Standard was approved by CEN on 7 January 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1744-7:2012: ESIST EN 1744-7:2012
EN 1744-7:2012 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Principle .45Apparatus .56Sampling and preparation of test specimens .57Procedure .68Calculation and expression of results .69Test report .7 SIST EN 1744-7:2012
EN 1744-7:2012 (E) 3 Foreword This document (EN 1744-7:2012) has been prepared by Technical Committee CEN/TC 154 “Aggregates”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This European Standard forms part of a series of tests for chemical properties of aggregates. Test methods for other properties of aggregates will be covered by the following European Standards: EN 932 (all parts), Tests for general properties of aggregates; EN 933 (all parts), Tests for geometrical properties of aggregates; EN 1097 (all parts), Tests for mechanical and physical properties of aggregates; EN 1367 (all parts), Tests for thermal and weathering properties of aggregates. The other parts of EN 1744, Tests for chemical properties of aggregates, are: Part 1: Chemical analysis; Part 3: Preparation of eluates by leaching of aggregates; Part 4: Determination of water susceptibility of fillers for bituminous mixtures; Part 5: Determination of acid soluble chloride salts; Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 1744-7:2012
EN 1744-7:2012 (E) 4 1 Scope
This European Standard specifies the test method used for the determination of the loss on ignition (LOI) of aggregates (MIBA Aggregates) produced by processing Municipal Incinerator Bottom Ash (MIBA). This European Standa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.