SIST EN 12808-4:2009
(Main)Grouts for tiles - Part 4: Determination of shrinkage
Grouts for tiles - Part 4: Determination of shrinkage
This European Standard applies to all ceramic tile grouts for internal and external tile installations on walls and floors. This European Standard specifies the test method to be used to determine the shrinkage of ceramic tile grouts. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
Klebstoffe und Fugenmörtel für Fliesen und Platten - Teil 4: Bestimmung der Schwindung
Diese Europäische Norm ist auf sämtliche Klebstoffe und Fugenmörtel für keramische Fliesen und Platten an Wand und Boden für innen und außen anwendbar.
Diese Norm beschreibt das Prüfverfahren zur Bestimmung der Schwindung von Fugenmörtel für keramische Fliesen und Platten.
Die Europäische Norm enthält keine Anforderungen an Und Empfehlungen für die Planung und Verlegung von keramischen Fliesen und Platten.
ANMERKUNG Fugenmörtel für keramische Fliesen und Platten können auch für andere Materialien verwendet werden (Natur-, Betonwerksteine usw.), sofern diese die Steine nicht negativ beeinflussen.
Mortiers de joints pour carrelages - Partie 4: Détermination du retrait
La présente Norme européenne s’applique à tous les mortiers utilisés pour le jointoiement à l’intérieur et
extérieur de carrelages céramiques sur les murs et au sol.
La présente Norme européenne spécifie la méthode d’essai à utiliser pour la détermination du retrait des
mortiers de joints.
La présente Norme européenne ne contient pas d’exigences de performance ni de recommandations relatives
à la conception et à la pose des carrelages en céramique.
NOTE Les mortiers de joints peuvent être également utilisés pour d’autres types de carrelage (pierre naturelle ou
agglomérée, etc.) s'ils sont compatibles.
Lepila in fugirne malte za ploščice - 4. del: Ugotavljanje skrčka
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Klebstoffe und Fugenmörtel für Fliesen und Platten - Teil 4: Bestimmung der SchwindungMortiers de joints pour carrelages - Partie 4: Détermination du retraitGrouts for tiles - Part 4: Determination of shrinkage91.100.23Ceramic tiles91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 12808-4:2009SIST EN 12808-4:2009en,fr,de01-oktober-2009SIST EN 12808-4:2009SLOVENSKI
STANDARDSIST EN 12808-4:20021DGRPHãþD
SIST EN 12808-4:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12808-4July 2009ICS 83.180; 91.100.10Supersedes EN 12808-4:2001
English VersionGrouts for tiles - Part 4: Determination of shrinkageMortiers de joints pour carrelages - Partie 4: Déterminationdu retraitKlebstoffe und Fugenmörtel für Fliesen und Platten - Teil 4:Bestimmung der SchwindungThis European Standard was approved by CEN on 21 May 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12808-4:2009: ESIST EN 12808-4:2009
EN 12808-4:2009 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Sampling .44 Test conditions .45 Test materials .46 Apparatus .47 Procedure .57.1 Mixing of grouts .57.2 Preparation of test specimens .57.3 Test procedure .68 Evaluation of results .69 Test report .6Bibliography . 11 SIST EN 12808-4:2009
EN 12808-4:2009 (E) 3 Foreword This document (EN 12808-4:2009) has been prepared by Technical Committee CEN/TC 67 “Ceramic tiles”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12808-4:2001. This document is one of a series of European Standards for ceramic tile adhesives including: EN 1308, Adhesives for tiles — Determination of slip EN 1323, Adhesives for tiles — Concrete slabs for tests EN 1324, Adhesives for tiles — Determination of shear adhesion strength of dispersion adhesives EN 1346, Adhesives for tiles — Determination of open time EN 1347, Adhesives for tiles — Determination of wetting capability EN 1348, Adhesives for tiles — Determination of tensile adhesion strength for cementitious adhesives EN 12002, Adhesives for tiles — Determination of transverse deformation for cementitious adhesives and grouts EN 12003, Adhesive for tiles — Determination of shear adhesion strength of reaction resin adhesives EN 12004, Adhesives for tiles — Requirements, evaluation of conformity, classification and designation EN 12808-1, Grouts for tiles — Part 1: Determination of chemical resistance of reaction resin mortars EN 12808-2, Grouts for tiles — Part 2: Determination of resistance to abrasion EN 12808-3, Grouts for tiles — Part 3: Determination of flexural and compressive strength EN 12808-4, Grouts for tiles — Part 4: Determination of shrinkage EN 12808-5, Grouts for tiles — Part 5: Determination of water absorption According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Ma
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Klebstoffe und Fugenmörtel für Fliesen und Platten - Teil 4: Bestimmung der SchwindungMortiers de joints pour carrelages - Partie 4: Détermination du retraitGrouts for tiles - Part 4: Determination of shrinkage91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:prEN 12808-4kSIST prEN 12808-4:2009en,fr,de01-marec-2009kSIST prEN 12808-4:2009SLOVENSKI
STANDARD
kSIST prEN 12808-4:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMFINAL DRAFTprEN 12808-4November 2008ICS 91.100.10Will supersede EN 12808-4:2001
English VersionGrouts for tiles - Part 4: Determination of shrinkageMortiers de joints pour carrelages - Partie 4: Déterminationdu retraitKlebstoffe und Fugenmörtel für Fliesen und Platten - Teil 4:Bestimmung der SchwindungThis draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the TechnicalCommittee CEN/TC 67.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any alteration.This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. prEN 12808-4:2008: EkSIST prEN 12808-4:2009
prEN 12808-4:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Sampling.4 4 Test conditions.4 5 Test materials.4 6 Apparatus.4 7 Procedure.5 7.1 Mixing of grouts.5 7.2 Preparation of test specimens.5 7.3 Test procedure.6 8 Evaluation of results.6 9 Test report.6 Bibliography.10
kSIST prEN 12808-4:2009
prEN 12808-4:2008 (E) 3 Foreword This document (prEN 12808-4:2008) has been prepared by Technical Committee CEN/TC 67 “Ceramic tiles”, the secretariat of which is held by UNI. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 12808-4:2001. kSIST prEN 12808-4:2009
prEN 12808-4:2008 (E) 4
1 Scope This European Standard applies to all ceramic tile grouts for internal and external tile installations on walls and floors.
This European Standard specifies the test method to be used to determine the shrinkage of ceramic tile grouts.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
NOTE Ceramic tile grouts can also be used for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.