SIST EN 12808-1:2009
(Main)Grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars
Grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars
This European Standard specifies the test method to be used to determine the chemical resistance of ceramic tile adhesives and grouts under anticipated service conditions.
This European Standard applies to reaction resin ceramic tile grouts and adhesives for internal and external ceramic tile installations on walls and floors.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles and grouts.
NOTE Ceramic tile adhesives and grouts can be used also for other kinds of tiles (natural and agglomerated stones, etc.), where these do not adversely affect the materials.
This European Standard can involve hazardous materials and operations. Persons using this standard should be familiar with normal laboratory practice. This European Standard does not purport to address all the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any European and national regulatory conditions.
Mörtel und Klebstoffe für Fliesen und Platten — Teil 1: Bestimmung der Chemikalienbeständigkeit von Reaktionsharzmörteln
Diese Europäische Norm legt das Prüfverfahren zur Bestimmung der Chemikalienbeständigkeit von Klebstoffen und Fugenmörteln für Fliesen und Platten unter den zu erwartenden Nutzungsbedingungen fest.
Diese Europäische Norm ist auf sämtliche Reaktionsharz Fugenmörtel und Klebstoffe für keramische Fliesen und Platten an Wand und Boden für innen und außen anwendbar.
Diese Europäische Norm enthält keine Anforderungen und keine Empfehlungen hinsichtlich der Planung und Verlegung der keramischen Fliesen/Platten und des Fugenmörtels.
ANMERKUNG Klebstoffe und Fugenmörtel für keramische Fliesen und Platten können auch für andere Arten von Fliesen und Platten verwendet werden (Natur , Betonwerksteine usw.), sofern diese die Steine nicht negativ beeinflussen.
WARNUNG — Diese Europäische Norm kann den Umgang mit gefährlichen Materialien und Durchführungen mit sich bringen. Personen, die diese Norm anwenden, sollten mit der üblichen Laborpraxis vertraut sein. Diese Europäische Norm beinhaltet keine vollständige Aufzählung der Sicherheitsprobleme, die mit ihrem Umgang verbunden sein könnten. Es liegt in der Verantwortung des Anwenders, Sicherheits und Gesundheitsvorschriften einzuhalten und die Überein¬stimmung mit europäischen oder nationalen Vorschriften sicherzustellen.
Mortiers de joints pour carrelages - Partie 1: Détermination de la résistance chimique des mortiers à base de résines réactives
La présente Norme européenne spécifie la méthode d'essai à utiliser pour évaluer la résistance chimique des colles et mortiers de jointoiement pour carrelage dans des conditions prévisionnelles d’utilisation.
Elle s'applique aux colles et mortiers à base de résines réactives pour la pose intérieure ou extérieure sur murs ou sols.
La présente Norme européenne ne concerne pas les spécifications et ne constitue pas des recommandations pour la conception ou l'installation de revêtements céramiques et de leur jointoiement.
NOTE Les colles et joints pour carrelage peuvent aussi être utilisées pour la pose d'autres types de carrelages que les carreaux céramiques (carreaux de pierres naturelles, carreaux agglomérés, etc.) si ils sont compatibles avec ces matériaux.
La présente norme européenne peut impliquer l’usage de produits et/ou de manipulations dangereux. Les personnes utilisant la présente norme seront habituées aux techniques courantes de laboratoire. La présente norme européenne ne traite pas des problèmes de sécurité en relation avec son usage. Il reste de la responsabilité de l’utilisateur de s’assurer de la pratique des recommandations d’hygiène et de sécurité en accord avec les règles européennes et nationales.
Lepila in fugirne malte za ploščice - 1. del: Ugotavljanje kemijske odpornosti malt na osnovi smol
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Mörtel und Klebstoffe für Fliesen und Platten — Teil 1: Bestimmung der Chemikalienbeständigkeit von ReaktionsharzmörtelnMortiers de joints pour carrelages - Partie 1: Détermination de la résistance chimique des mortiers à base de résines réactivesGrouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars91.100.23Ceramic tiles91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 12808-1:2008SIST EN 12808-1:2009en,fr,de01-marec-2009SIST EN 12808-1:2009SLOVENSKI
STANDARDSIST EN 12808-1:20001DGRPHãþD
SIST EN 12808-1:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12808-1October 2008ICS 83.180; 91.100.10Supersedes EN 12808-1:1999
English VersionGrouts for tiles - Part 1: Determination of chemical resistance ofreaction resin mortarsMortiers de joints pour carrelage - Partie 1: Déterminationde la résistance chimique des mortiers à base de résinesréactivesMörtel und Klebstoffe für Fliesen und Platten - Teil 1:Bestimmung der Chemikalienbeständigkeit vonReaktionsharzmörtelnThis European Standard was approved by CEN on 29 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12808-1:2008: ESIST EN 12808-1:2009
EN 12808-1:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Sampling.4 4 Test conditions.4 5 Test materials.4 6 Apparatus.5 6.1 Mould.5 6.2 Containers.5 6.3 Compression machine.5 6.4 Chemical agent.5 7 Test specimen.5 7.1 Number.5 7.2 Dimension.6 7.3 Preparation.6 7.4 Conditioning.6 8 Procedure.6 9 Evaluation and expression of results.7 9.1 Mass change.7 9.2 Diameter change.7 9.3 Change of compressive strength value.8 10 Test report.8
SIST EN 12808-1:2009
EN 12808-1:2008 (E) 3 Foreword This document (EN 12808-1:2008) has been prepared by Technical Committee CEN/TC 67 “Ceramic tiles”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by April 2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12808-1:1999. This document is one of a series of European Standards for ceramic tile adhesives including: EN 1308, Adhesives for tiles - Determination of slip EN 1323, Adhesives for tiles - Concrete slabs for tests EN 1324, Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives EN 1346, Adhesives for tiles - Determination of open time EN 1347, Adhesives for tiles - Determination of wetting capability EN 1348, Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives EN 12002, Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts EN 12003, Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives EN 12004, Adhesives for tiles – Requirements, evaluation of conformity, classification and designation EN 12808-1, Grouts for tiles – Part 1: Determination of chemical resistance of reaction resin mortars EN 12808-2, Grouts for tiles – Part 2: Determination of resistance to abrasion EN 12808-3, Grouts for tiles – Part 3: Determination of flexural and compressive strength EN 12808-4, Grouts for tiles – Part 4: Determination of shrinkage EN 12808-5, Grouts for tiles – Part 5: Determination of water absorption According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 12808-1:2009
EN 12808-1:2008 (E) 4
1 Scope This European Standard specifies the test method to be used to determine the chemical resistance of ceramic tile adhesives and grouts under anticipated service conditions. This European Standard applies to reaction resin ceramic tile grouts and adhesives for internal and external ceramic tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles and grouts. NOTE Ceramic tile adhesives and grouts can be used also for other kinds of tiles (natural and agglomerated stones, etc.), where these do not adversely affect the materials. WARNING - This European Standard can involve hazardous materials and operations. Persons using this standard should be familiar with normal laboratory practice. This European Standard does not purport to address all the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any European and national regulatory conditions. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1067, Adhesives - Examination and preparation of samples for testing EN ISO 15605, Adhesives – Sampling (ISO 15605:2000) 3 Sampling Take a test sample of at least 2 kg of the adhesive or grout in ac
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.