kSIST FprEN 12004-1:2020
(Main)Adhesives for ceramic tiles - Part 1: Essential characteristics and AVCP
Adhesives for ceramic tiles - Part 1: Essential characteristics and AVCP
This document is applicable to the following three types of adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This document specifies the essential characteristics and the respective threshold levels of the adhesives for ceramic tiles.
It also specifies the appurtenant test methods and the assessment and verification of constancy of performance (AVCP).
NOTE This document does not provide criteria or recommendations for the design and installation of ceramic tiles.
Mörtel und Klebstoffe für keramische Fliesen und Platten - Teil 1: Anforderungen, Bewertung und Überprüfung der Leistungsbeständigkeit, Einstufung und Kennzeichnung
Colles à carrelage - Partie 1: Caractéristiques essentielles et EVCP
Lepila in malte za keramične ploščice - 1. del: Bistvene značilnosti in ocenjevanje ter preverjanje nespremenljivosti lastnosti (AVCP)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 12004-1:2020
01-september-2020
Lepila in malte za keramične ploščice - 1. del: Bistvene značilnosti in ocenjevanje
ter preverjanje nespremenljivosti lastnosti (AVCP)
Adhesives for ceramic tiles - Part 1: Essential characteristics and AVCP
Mörtel und Klebstoffe für keramische Fliesen und Platten - Teil 1: Anforderungen,
Bewertung und Überprüfung der Leistungsbeständigkeit, Einstufung und Kennzeichnung
Colles à carrelage - Partie 1: Caractéristiques essentielles et EVCP
Ta slovenski standard je istoveten z: prEN 12004-1
ICS:
83.180 Lepila Adhesives
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
91.100.23 Keramične ploščice Ceramic tiles
oSIST prEN 12004-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12004-1:2020
---------------------- Page: 2 ----------------------
oSIST prEN 12004-1:2020
DRAFT
EUROPEAN STANDARD
prEN 12004-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2020
ICS 83.180; 91.100.10 Will supersede EN 12004-1:2017
English Version
Adhesives for ceramic tiles - Part 1: Essential
characteristics and AVCP
Colles à carrelage - Partie 1: Caractéristiques Mörtel und Klebstoffe für keramische Fliesen und
essentielles et EVCP Platten - Teil 1: Anforderungen, Bewertung und
Überprüfung der Leistungsbeständigkeit, Einstufung
und Kennzeichnung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 67.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12004-1:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12004-1:2020
prEN 12004-1:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Characteristics . 6
4.1 Cementitious adhesives (C) . 6
4.2 Dispersion adhesives (D) . 6
4.3 Reaction resin adhesives (R) . 7
4.4 Reaction to fire .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.